Shenzhen Intellirocks Tech AP-H2016 Smart Air Purifier User Manual

Shenzhen Intellirocks Tech AP-H2016 Smart Air Purifier User Manual

READ AND SAVE THESE INSTRUCTIONS

Safety Instructions

• Only use Smart Air Purifier as described in this manual.
• Do not use without removing the plastic wrap from the Filler. If not removed, The air purifier will not filter air, and may over heat. causing a fire hazard.
• Do not use the air purifier outdoors.
• Keep the air purifier way torn water or wet, damp areas. Never place in water or liquid.
• Do not use in excessively humid areas.
• Keep the air purifier away from heat sources such as stovetops, ovens, or radiators.
• Do not use where combustible gases, vapours, metallic dust, aerosol (spray) products, or fumes from industrial 0 11 are present.
• Keep 5 feet/ 1.Sm away from where oxygen is being administered.
• Supervise children when they are near the air purifier.
• Do not place anything into the openings of the air purifier.
• Do not place heavy objects on the air purifier.
• Keep the inside ochre air purifier dry. To prevent moisture build up, .void placing in rooms with major temperature changes or underneath air conditioners.
• Always unplug the air purifier before servicing (such as when changing the filter).
• Do not use the air purifier if it is damaged or not working correctly, or if the power cord or plug is damaged. Do not repair yourself. Contact Customer Support.
• WARNING:  To reduce the risk of fire or electric shock, do not use this air purifier in combination with any 3rd party controls (such as a dimmer switch).
• Not for commercial use. Household use only.

Package Includes

Specifications

Getting to Know Your Smart Air Purifier

• a. Panel
• b. Air Outlet
• c. Housing
• d. Air Inlet
• e. Dust Sensor
• f. Filter Covers
• g. Filter Cover Handle
• h. Non-slip Pads
• i. 3-in-1 True HEPA Filter
• j. DC Input Port
• k. Adapter Output Cable
• I. Power Adapter

Getting Started

1. Rotate the bottom filter cover counter clockwise and take it out.
   

2. Remove the filter from its plastic packaging and place it back into the air purifier.

3. Reattach the filter cover and rotate clockwise to lock. The sound of “dah” Indicates the filter cover is lighted up.

4. Place the air purifier on dial, stable surface with the panel facing up. Allow at least 15 In/ 38 cm of clearance on all sides of the air purifier. Keep away from anything that would block airflow, such as curtains and cabinet.

5. Insert the adapter output cable into the DC input port, then plug the power adapter into a 120V socket. Now your purifier is ready to use!

Using Your Smart Air Purifier

Note: You could peel off the protective film on the panel before using.

1. Functions & Controls

Memory Function

This air purifier will save its previous settings when powered off (such as speed, mode, and WiFi connection), and when it is powered back on, the settings will resume.

2. LED Indicators

Care & Maintenance

Cleaning the Smart Air Purifier

Do not clean with abrasive chemical ls or flammable cleaning agents.

Cleaning Steps

1. Unplug before cleaning.
2. Wipe the out side of the air purifier with a soft. dry cloth. If necessary. wipe the housing with a damp cloth, then immediately dry.
3. It Is recommended to vacuum the Inside of the purifier.

Cleaning the Filter

Filter Change Time Period

The filter should be replaced every 6-8 months. The exact date at which your filter may need to be changed may vary depending on how often you use your air purifier. Using your air purifier in an environment with relatively high pollution may mean you will need to replace the filter more often, even if the filter change indicator is off. The filler needs to be replaced in any following case:

• Increased noise
• Decreased air now
• Unusual Odors
• A visibly clogged filter

Resetting Filter Change Indicator

When the Filter Change Indicator light’s red, it prompts to reset the filter service life.

• Press and hold for 3 seconds. f lash 3 times and then turn off once successfully reset
• will light up as a reminder to replace the fitter. The Indicator should turn on within 6–8 months, though this time period can be longer or shorter hazed on the actual usage. You may not need lo replace your filler yet, but you should check it when turns on ,and plan to replace it soon.
• Reset the Filter Change indicator when you have replaced the filter.

Storing

If not using the air purifier for an extended period of time, wrap both the air purifier and the filter in plastic packaging and store them in a dry place to avoid moisture damage.

Troubleshooting

The troubleshooting section below ,s for solving frequently asked questions for the purifier unit. If your problem persists, please contact customer support.

For Smart Air Purifier

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference In a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However. there is no guarantee th.it interference will not occur in u particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged lo try to correct the 1nlerrerence by one or more or the roll flowing measures:

1. Reorient or relocate the receiving antenna.
2. increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

FCC Radio Frequency Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm.

IC Statement

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1)this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.
IC RF Statement:
When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Shenzhen lntell1rocks Tech. Co., Ltd. is under license.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>