MagiAcous FX100 RGB Floor Lamp Music Sync User Manual
- June 6, 2024
- MagiAcous
Table of Contents
MagiAcous FX100 RGB Floor Lamp Music Sync User Manual
Product Specifications
Product Parameter
How to assemble
- Screw the lamp-socket and the threaded lamp tube together. When rotating, hold the lamp-socket, rotate the chassis and tighten them.
- insert the lamp tube, pay attention to the male and female head, and insert it tightly without gap.
- insert the lamp tube, pay attention to the male and female head, and the insert firmly without gap.
- Insert the fourth section. Note that this is the top section with an end cap.
2. Power control assembly
- Connect the lamp body to the connector of the controller.
- Insert the DC head of the power output into the controller interface.
- Insert the power plug into the AC power socket.
Manual Control by 3 Buttons
C: Click to switch 10 kinds of scene modes.
OFF/ON: click to turn on or off the light, long press for 5S to enter the red light blinking, pairing of the mobile to realize APP control.
M : Click to switch between 4 music modes.
Remote Control
APP Control
- Download Smart Life App from Apple App Store or Google Play.
- App Control Supports Android 5.0 and IOS 10.0.
Note
- App share function, when the main sharing account is not within the connection range or closed during the phone call, the sharing account is able to control the device;
- If the product is stuck, please turn off the power and restart it. Resetting the device after booting can fix this type of problem.
FCC Compliance
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency enter and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. Note:
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void
the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must withstand any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Manufacturer : Shenzhen Guiyang Network Technology Co., Ltd Address : 1404K3,
East Block, Shengtang Commercial Building, Tairan 9th Road, Tianan Community,
Shatou Street, Futian District, Shenzhen, China.
CE Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>