rapoo M200 Multi-Mode Wireless Mouse User Guide
- June 6, 2024
- rapoo
Table of Contents
M200 Multi-Mode Wireless Mouse
User Guide
Instruction
https://www.bilibili.com/video/BV1yW411C7BH
Scan to quickly understand the connection steps
Package contents
System requirements
Windows’ XP / Vista / 7 / 8 / 10 or later, USB port
Switch among paired devices
Press the Bluetooth button to switch among up to 3 paired devices (connect up
to 2 devices via Bluetooth and 1 via a 2.4 GHz receiver).
2.4GHz connection
Insert the Rapoo receiver and turn on the power switch of the mouse to
complete the connection.
Pair your first device
Turn on the mouse the, Bluetooth button for more than, 3 seconds, and the mouse will be in a searchable state within 2 minutes.
Pair your second device
Short press the blue key for 0.5 seconds to switch channels. Long press the
Bluetooth key for more than 3 seconds, and the mouse will be in a searchable
state within 2 minutes. Follow the steps of “pairing your first device” to
complete the connection of the second device.
Status LED
Instructions for connecting back to the indicator light
Turn on the mouse switch, the indicator light will be on for 6 seconds, and
the Bluetooth device 1 is currently connected; The indicator light flashes
slowly, and the Bluetooth device 2 is currently connected; The indicator light
goes out, and the 2.4G receiver device is currently connected.
Note 1: “Ο ” Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that
the percentage content of the restricted substance exceeds the reference
percentage value of the present condition.
Note2: “Ο ” indicates that the percentage content of the restricted
substance does not exceed the percentage of the reference value of presence
WARRANTY
The device is provided with one-year limited hardware warranty from the purchase day. Please see www.rapoo.com for more information.
Safety instructions
Do not open or repair this device. Do not use the device in a damp environment. Clean the device with a dry cloth.
Troubleshooting
See www.rapoo.com for the latest FAOs, drivers, and quick start guide. For more services and help, please register on www.rapoo.com.
Copyright
It is forbidden to reproduce any part of this quick start guide without the permission of Shenzhen Rapoo Technology Co., Ltd.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help