D-Air Lab 301N Protecting Workers User Guide

June 5, 2024
D-Air Lab

User GuideD Air Lab 301N Protecting Workers - qrhttps://dairlab.com/packaging-running

301N Protecting Workers

Device
**** It is recommended to carefully read the user manual, available on https://dairlab.com/packaging-running/
Always check the battery charge before use

D Air Lab 301N Protecting Workers -

For more information and configuration, visit https://dairlab.com/packaging- running/D Air Lab 301N Protecting Workers - 1

Wiederaufladbare Lithium-Ionen-Polymerbatterie: 3.7V 660mAh

D Air Lab 301N Protecting Workers - 2D Air Lab
301N Protecting Workers - 3

Charge the battery at temperatures between 15°C and + 35 ° C
**** USBC: Solo per ricaricare
WARRANTY TERMS AND CONDITIONS: https://dairlab.com/packaging-running/

CERTIFICATION

**UE:

USA:
** This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by DAirlab could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction

FCC ID: 2AWM3-301N
Contains FCC ID: SSSBC127-X

CA:
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

D-Air lab srl
Via dell’Economia 64 /c
36100 Vicenza (VI), Italy
Phone +39 0444 1429920
Fax +39 0444 1429929
http://dairlab.com/
info@dairlab.com
Contains / Contient IC ID: 11012A-BC127
Model: 301_N

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals