Keshon USD107 126LED 1500LM Wireless Security Flood Lights Instructions
- June 6, 2024
- Keshon
Table of Contents
Keshon USD107 126LED 1500LM Wireless Security Flood Lights Instructions
How to Use Solar Lamps
-
Take out the positioning jam and the screw pack. and locate the position where you need to install. Punch holes. plug rubber plugs. and screw on screws.
-
Take out the solar fight. align the card position with the screw position. and clamp it from top to bottom.
-
Tighten the screws with the prepared Phillips screwdriver.
-
Take out the cover. hold it tightly with both hands at a 45-degree inclination.
-
Press the switch button once to activate and enter the normal working mode.
-
The light turns on after pressing the button. enters the working mode at night. and the light turns off during the day to charge.
-
Adjust the lights on the left and right to the range that needs to be illuminated. Can be rotated up and down. left and right to adjust.
-
Pull out the PVC cardboard from the remote control. aim at the solar light and select the mode you need.
Light Up from 3 Sides
270° Rotatable design provides adjustable light angle
Upgraded Remote Control Solar Lights
You can switch and select the lighting mode easily and conveniently.
Mode 1 Motion Sensor High Light + OFF
Mode 2 Constant Dim Light
Mode 3 Dim Light + Motion Sensor High Light
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>