Mei Zhou Jotenfe Electronic Technology DG2610 Dongle User Guide
- June 6, 2024
- Mei Zhou Jotenfe Electronic Technology
Table of Contents
Mei Zhou Jotenfe Electronic Technology DG2610 Dongle User Guide
1. BUTTONS
– On/Off slider switch: Turn the power on or off.
– Bluetooth connect button: When the unit is powered On, press the [connect]
button, the keyboard is now ready to be connect to your device (e.g. computer,
smartphone, tablet, game console, etc).
2. LED DISPLAY
The icon will flash blue (±3 min. long) after pressing the “connect” button
until a BT connection is established. It disappears when connected.
Low power: The blue light will rapidly flash when the battery is weak and
batteries need be replaced.
Power: The blue light will light up ± 4 seconds when the unit is turned on.
3. SYSTEM REQUIREMENTS
– iPad, iPhone – All versions
– Bluetooth-enabled PCs or Laptops with Windows XP ~10
– Bluetooth-enabled iMac / MacBook’s with Mac OS X 10.2.8 or above (note that
some exceptions may apply. This keyboard may not be compatible with the Mac
mini.
– Smartphones or tablets with Android 3.0 and above (with Bluetooth HID
profile)
– Windows Mobile 5.0 and above
4. PAIRING KEYBOARD METHODS
Pairing with an iPad/ iPhone
– Step 1: On the keyboard, slide the power button to on. The blue status light
will illumination for 4 seconds and then turn off to save power.
Note: your keyboard is still on.
– Step 2: Press the [connect] button, the [Bluetooth] indicator light will be
blinking blue.
– Step 3: On the iPad/iPhone, select: Setting- General- Bluetooth On.
– Step 4: The iPad/iPhone will display as an available device.
– Step 5: Select the iPad/iPhone will display a code.
– Step 6: Type the code on the keyboard and press enter; keyboard will now be
paired to the iPad/iPhone.
Pairing with Tablets , Smartphones, Laptop and Desktop computers, etc.
– Step 1: On the keyboard, slide the power button to on. The blue status light
will illumination for 4 seconds and then turn off to save power.
Note: your keyboard is still on.
2.4G dongle description
- The YC1063 is a very low power, high performance and highly integrated 2.4G Proprietary solution, designed for operation over the 2400MHz to 2483.5Mhz ISM frequency band..
- YC1063 is manufactured using advanced 55nm CMOS low leakage process, which offers highest integration, lowest power consumption, lowest leakage current and reduced BOM cost while simplifying the overall system design.
2.4G connection method:
Set the power switch to ON Press the CONNECT button on the keyboard The icon
will flash blue after pressing the “connect” button
- Then press Fn + 3 and then Plug in the receiver, until a 2.4G connection is established, the blue icon disappears when connected
– Step 2: Press the [connect] button, the [Bluetooth] indicator light will be
blinking blue.
– Step 3: Go to your “settings” screen on your tablet, laptop, smartphone or
other Bluetooth – enabled devices and go to the Bluetooth setting menu and
activate its Bluetooth function and search for the keyboard.
– Step 4: Once the Bluetooth keyboard has been found, select its name to
connect.
– Step 5: Enter the password code as displayed on the screen.
– Step 6: Once the Bluetooth keyboard has successfully been connected to your
device, the Bluetooth indicator will turn off.
NOTE:
– Only one device can be actively paired at one time.
– After pairing for the first time, your device will connect to the keyboard
automatically when switching on the keyboard.
– In case of connection failure, delete the pairing record from your device,
and try the above pairing procedures again.
POWER SAVING MODE
The keyboard will enter into the sleep mode after being idle for 15 minutes. To activate the keyboard, press any key and wait 3 seconds.
5. FUNCTIONAL KEYS
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation. Any Changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>