HAZELTINE SPK98 Carabiner BT Speaker Instruction Manual
- June 6, 2024
- HAZELTINE
Table of Contents
Carabiner BT Speaker
Instruction Manual
SPK98
Functions
- ON/OFF Switch
- LED Indicator
- Type-C input port
- Movable buckle
What’s included
1 x Hazeltine Carabiner BT Speaker
1 x USB to Type-C Charging Cable
1 x Instruction Manual
Tech Specifications
- Playing time: up to 1.5 hr at max volume
- Charging time: up to 1.5 hr
- Pairing name: Hazeltine
Instructions
(Be sure to fully charge the speaker before using it for the first time.)
-
Charging the Speaker
• Connect the provided charging cable to a power source and to the Type-C port on the speaker 3.
• The LED indicator light will glow red when charging and turn off when fully charged. -
Bluetooth® Setup
• Turn ON/OFF switch CD to ON position, LED indicator ? 2 will flash BLUE.
Turn on the Bluetooth function on a mobile device, Select the “Hazeltine” pairing name.
• The LED will turn solid Blue and a tone will sound to confirm the speaker is successfully paired.
Speaker will automatically pair if the mobile device has been paired before.
Turn-ON/OFF switch CD to OFF position to turn off the device.
** If the Bluetooth is disconnected the speaker will auto shut off after 5 mins.
SAFETY PRECAUTIONS:
WARNING-When using this product, basic precautions should always be followed:
- Read all the instructions before use.
- Never store or use this product in temperatures below 32°F(0°C) or above 115°F(45°C)
- The unit’s full performance is achieved only after 2 or 3 completed charge and discharge cycles.
- Keep out of reach of children.
- Do not use the device in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury.
- Do not use the device if damaged or modified.
- Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
- Do not disassemble the device. For repairs, seek a qualified service professional. Incorrect reassembly may result in a risk of fire or injury.
- Do not expose the device to fire or excessive temperature. Exposure to fire or temperatures above 104F may cause an explosion.
- Ensure that qualified service professionals use only identical replacement parts to ensure product safety
FCC Statement:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment general uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures: Reorient
or relocate the receiving antenna. Increase the separation between the
equipment and receiver. Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. Consult the dealer or
an experienced radio/TV technician for help. This device complies with part 15
of the FCC rules. Operation is subject to the following two conditions (1)
this device may not cause harmful interference, and (2)this device must accept
any interference received, including interference that may cause undesired
operation.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>