Lotuze BT510 Digital Alarm Clock with Wireless Charging and USB Charger User Manual

: June 6, 2024
: Lotuze

Table of Contents

Important Safety Information
Getting to know your alarm clock
- Package Contents
- Controls & features
Getting started Setting the clock
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Bedside Alarm Clock with
Wireless Charging

The Lotus combines a traditional bedside alarm clock radio with Bluetooth and a wireless charging pad in a neat stylish solution.

Dear Customer,
We’re thrilled to welcome you to the Lotus family! Thank you for purchasing our product.
We are proud to serve you as our customer and sincerely hope that you get the most out of your purchase.
If you have any questions, please feel free to contact us!

Caring for your Alarm Clock

Important Safety Information

Important – Please read these instructions fully before installing or operating your speaker.
Keep away from flame sources such as lighted candles.
Do not expose to dripping or splashing fluids. Objects filled with liquids, such as vases, must not be placed close to the speaker. The unit should not be exposed to direct sunlight, very high or low temperature, moisture, vibrations, strong magnetic fields, high frequencies, and dusty environments.
Do not place the product in enclosed bookcases or racks without proper ventilation. Ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc.
Never attempt to insert wires, pins, or other such objects into the vents or openings of the unit.
Do not disassemble or modify the alarm clock, there are no user-serviceable parts.
If the alarm clock is damaged in any way or malfunctions do not use it. Consult a qualified service engineer.
Do not dispose of this product with household waste at the end of its life cycle; hand it over to a collection center for the recycling of electrical and electronic appliances

Getting to know your alarm clock

Package Contents

Bedside alarm clock with wireless charging

Type-C Cable
Audio Cable

Controls & features

Top Panel

0: Wireless Charger Zone

1: Temperature & Brightness
2: Alarm & Time set
3: Mode key & Power display| 4: Previous song & Volume down
5: Play/Pause & Power ON/OFF
6: Next song & Volume up
---|---

Side Panel

7: 3.5mm Audio cable Port
8: USB Charging/U Disk Reading Port

back panel

9: Type-C Charging port
10: Charging Indicator

Display

1: Time display
2: Bluetooth Indicator
3: FM Indicator
4: AUX Indicator
5&6: Alarm indicators

Getting started Setting the clock

Clock setting

Long press (5) to turn on.
Long press (2) to set the hour.
Press(4) or (6) to change the hour
Short press (2) to set the minute(s).
Press (4) or (6) to change the minute(s).
Long press (2) again to finish once the time has been set.

Alarm setting

In standby mode (or dock mode), press (2) until the dock sign of AL1 displays, the unit will then allow you to set the first alarm.
Press (4) or (6) to select the hour.
Press (2) and / (4/6) 1E,,31 to select the minute(s).
Long press (2) to finish the setting.
Repeat the above steps to complete all alarm settings

Alarm enable/disable

When the alarm sounds, you can press any key to pause it. The default setting is to resound every five minutes and stop after repeating 2 times.
If you want to cancel the snooze, press (2) to the alarm mark disappears

Dimmer

Press (1) to select the brightness of the display.

Bluetooth connecting

Press (3) to cycle through the modes until you get to Bluetooth mode.
Select BT510 from the Bluetooth list on your device to start (If it needs a password, please enter “0000”)
Once pairing is successful, the Bluetooth display will stop flashing and a beep will sound.

Bluetooth play operation

Press (4/6) to increase or decrease the volume level (0-16).
Press (4) to play the previous song or press (6) to select the next song.
Press (5) to play or pause the song.

FM radio operation

Press (3) to cycle through the modes until you get to FM radio mode and press (5) to search for the FM station automatically. press me or (6) to change the FM station.
Press (4) or(6) to increase or decrease the volume level.

There are 10 preset spaces available for you to store your
Plug the audio cable into the 3.5 audio port for a better antenna

Charging your phone

You can charge your phone wirelessly or by using the available USB charging port on the side of the Lotus.

Please do not use both charging methods at the same time for one device (charging cable not included).
Please connect the power before charging your phone.

Wireless charging

Place your smartphone centrally on top of the Lotus digital Alarm Clock as shown.
The battery power of your device is shown via your device’s display
For maximum charging efficiency, the phone must be aligned with the center of the charging area (0)
Compatible with multi-brand multi-device charging: Support Apple / Android phones with wireless charging function and the full range of Apple watches / Airpods wireless charging version / Airpods pro

If problems occur when charging or if charging does not start:

Remove your smartphone from its case if the thickness of the case exceeds 5mm or if it contains metal.
Check if your smartphone is placed on top of the Lotuze digital Alarm Clock correctly as shown.
The charging time varies depending on the charging capacity of the battery and its current residual capacity.
The components may heat up during the charging process. They will slowly cool down again after the charging process.

USB charging

Connect an external device via a USB cable to the USB charging port (8) on the side of the Lotuze to charge the
The battery power of your device is shown via your device’s

There may be some radio interference while charging.
Please charge your device using only one charging method at any one time.
Please do not charge the same device using the wireless charging function and USB charging port at the same time.

__ Specifications

Battery:
Charge Cable: TYPE C
Working Time:about 6 hours calls & music (middle volume) Capacity: DC3.7v 2000mAh

Audio:
Speaker Size: p50mm
Passive Vibrating: p5Omm*1 Output: 10W

Connect:
Bluetooth Version: V5.0
Bluetooth Profile: A2DP, AVRCP, HFP, HSP
Bluetooth Range: Over 10 meters (30 feet)

FM Radio:
Wireless Spectrum: 76-108MHz

Wireless Charger
Charging power supply: DC5V 3A (allow wireless charging & USB output charging)
Output Power: 5V=1A, 10W