Sphinx Electronics Kg KG 022 Battery lock Instructions

Sphinx Electronics Kg KG 022 Battery lock

Simple reset
A simple reset is required in the following cases:

• If the programming key card and clearing key card (master keys) have been lost. After a simple reset, the allocated master keys are cleared and reallocation is required (LED continuously flashing in green). Continued use of the terminal is not possible until a restart with new master keys (5. Commissioning, page 33). The locking authorisations for the user keys are retained after a simple reset.

Prerequisites : A tool to actuate the reset button, such as a thin pen/pencil or opened out paper clip.

1. Press the reset button.
   • A brief acoustic signal is heard.
2. Press and hold the reset button until a long acoustic signal is heard.
   • The lock on parametrisation with the MDU 110 mobile programming unit is disabled.
   • The LED flashes continuously in green.
3. Re-teaching master keys.

Complete reset

A complete reset resets the furniture lock to the factory settings. All data is cleared. The furniture lock then has to be reconfigured ( 5. Commissioning, page 33.). A complete reset is required in the following cases:

• Complete erasing of all data (e.g. in the event of return to stocks/warehouse).
• Resetting of software operation to stand-alone operation (SA).

Prerequisites : A tool to actuate the reset button, such as a thin pen/pencil or opened out paper clip.

1. Press the reset button.
   • A brief acoustic signal is heard.
2. Press and hold the reset button until two long acoustic signals are heard.
   • The LED flashes rapidly in green and red.
   • All data and access rights are cleared.
   • The lock switches to commissioning mode.

Cleaning and maintenance

Cleaning
Clean outer surfaces of product if necessary:

• with a dry, soft cotton cloth, or
• with a damp cloth and a little washing-up liquid or neutral cleaner

Maintenance
The product is maintenance-free apart from having to change the batteries.

NOTE
Damage to product due to incorrect maintenance

• Do not carry out repairs.
• Do not use lubricants.
• Contact the manufacturer in the event of damage/malfunctions.
• If parts have to be replaced, always use original replacement parts from HÄFELE.

Battery change

NOTE

Problem-free operation is only ensured with fully charged batteries.

• Replace weak batteries immediately as soon as the signal occurs.
• Only use approved batteries 3.2 Technical data, page 31.
• Always replace all batteries.
• The use of rechargeable battery packs is not permitted.

The clock continues to run for up to 5 minutes without batteries.

• The batteries should therefore be changed quickly.
• If necessary, reset the time with the MDU 110 mobile programming unit after changing the batteries.

1. Slide the cover to the side.
2. Remove the batteries.
3. Insert new batteries. Ensure the polarity is correct.
4. Slide the cover back into place.

NOTE: Product damaged caused by closing the EFL 30 / EFL 30 C without batteries. If the EFL 30 / EFL 30 C is closed without batteries after commissioning, it can no longer be opened without force.

Battery notifications

Very low battery
3x long + 3x long + 2x short (access denied)| •    Directly after reading an authorised or unauthorised user key| •    Very low battery

•    The authorised user key is rejected as the battery is very low

10x short| •    User key with deadbolt lock function after unlocking| • Very low battery

•    Signal indicates that the furniture lock is not locked and remains open

Short double acoustic signal (every minute)| •    Lock is disabled| • Signal indicates that the user should unlock the furniture lock immediately and change the batteries.

•    Otherwise there is a risk that the furniture lock will remain permanently locked when the batteries die.

Storage

• Store packages under the following conditions:
• Do not store outdoors.
• Store in a dry and dust-free place.
• Do not expose to aggressive media.
• Protect against sun exposure.
• Avoid mechanical vibrations.
• Observe the storage temperature: – 25°C bis + 95°C
• Observe the relative humidity: max. 95%, not condensed.
• Remove batteries when in temporary storage and only insert them immediately before commissioning.
  If there are further storage instructions provided in the product packaging, be sure to comply with these also.

Disposal: Do not dispose of the appliance in household waste. Please note the country-specific regulations.

EU Declaration of conformity

Sphinx Electronics GmbH & Co KG hereby declares that the EFL 30 / EFL 30C battery-operated lock is compliant with directives 2014/53/EU and 2011/65/EU and 305/2011/EU. The complete text of the EU declaration of conformity can be found under the product at the following website: www.hafele.com.

Approval according to Part 15 of the FCC rules

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following  measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
• the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s)]. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
   Changes or modifications made to this equipment not expressly approved by Häfele may void the FCC authorization to operate this equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>