AOMAIS L12 Torch Light Outdoor Bluetooth Speaker User Manual
- June 6, 2024
- AOMAIS
Table of Contents
USER
MANUAL
TORCH LIGHT BLUETOOTH SPEAKER
Please read carefully before use
INTRODUCTION
Thank you for purchasing the AOMAIS Torch Light Bluetooth Speaker.
This upgraded Bluetooth speaker can be used as a portable speaker and
atmosphere lamp that allows you to enjoy music wirelessly in a campfire
atmosphere, and relax your mood. Fantastic for placing at the room, patio,
yard, garden, party, and camping …
WHAT YOU GET
AOMAIS Torch Light Bluetooth Speaker x 1
Stick Pole x 1
Wall Mount x1
Hook x1
Type C Charge Cable x 1
User Manual x 1
TECHNICAL PARAMETERS
| Model | L12 | Bluetooth | V5.0(CSB) | Working Range | a20M |
|---|---|---|---|---|---|
| Output Power | 10W | SNR | >75db | Flame Light | 3 Modes |
| Waterproof | IP65 | Battery | 3.7V2000mAh | Charging Time | 2.5H |
BLUETOOTH PAIRING
| 1. Press and hold the Power Button for 3-4 seconds to power on your
speaker.
---|---
| 2. All buttons emit blue light and flash rapidly to indicate that it’s
searching for Bluetooth devices.
| 3. Go to the Bluetooth settings menu on your phone or other devices. Make
sure that Bluetooth is turned on. Connect to the device listed as “TORCHLIGHT”
| 4. The blue LED light on the buttons flashes about every 2 seconds to
indicate that your speaker is paired with your device. Automatically power off
in 5 minutes when Bluetooth is not connected.
| 5. You can pair 2 or more AOMAIS Torch Light Speakers at one time for
stereo mode. After your device is connected to one speaker (the main speaker),
tap the Bluetooth button twice on the main speaker, then turn on other
speakers and tap the Bluetooth button twice on each other speakers, now all
the speakers are connected for stereo effect.
USING YOUR SPEAKER
| 1. Flamelight
Press the Light On/Off button to turn the light on or off. Short press to
adjust the mode of the light Flicking/Candle/ Always On
---|---
| Play Music/Answer a Call.
Short press the Play/Pause button to play a track or to answer an incoming
call. Press it again to pause atack orendo call. Press and hold the Play/Pause
buttan to reject an incoming call
| 3. Button”+”:
Tap once ta increase the volume. Press and hold ta advance ta the next track
in a playlist
| 4. Buttan”-”
Tap once to turn down the volume. Press and hold to return to the previous in
a playlist
| 5. Bluetooth
Press and hold the Bluetooth button to disconnect/reconnect Bluetooth. Tap
twice to CSB Mode which supports the multi-connect function
CHARGING YOUR SPEAKER
While charging, the red LED light flashes and will go out once charging is complete.
MAINTENANCE &CARE
-Before using your speaker, inspect the ports to make sure that they are clear of dust and debris before charging
-Use a soft cloth to clean your space. Never use any harsh chemicals or detergents. Make sure your speaker is dry before charging
-When your speaker is not in use, it should be stored in a cool, dry place.
-Never tug or yank on the USB charging cable while it 1s connected to your speaker. Connect and disconnect cables as carefully as possible.
-Never expose your speaker to high temperatures or extreme cold.
-Please recycle or dispose of your speaker properly based on the laws and rules of your municipality. Contact local recycling facilities and/or the manufacturer of your speake for further information.
DOMAINS ONE YEAR WARRANTY
This warranty covers the original consumer purchaser only and is not
transferable. This warranty covers products that fail to function properly
UNDER NORMAL USAGE, due to defects in material o workmanship. Your product
will be repaired or replaced at no charge for parts or labor for a period of
one year.
What Is Not Covered by Warranty
Damages or malfunctions not resulting from defects in material or workmanship
and damages or malfunctions from other than normal use, including but not
limited to repair by unauthorized parties, tampering, modification, or
accident.
To Obtain Warranty Service and Troubleshooting Information:
Email support@aomais.com or visit our website at
https://www.aomais.com
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>