soundswell Smartwatch Series B0919LJZT6 Waterproof Action Sport Headphone User Guide

smartwatch series
waterproof action sport headphones

1. Align and connect smartwatch adapters to the smartwatch. *Confirm smartwatch is secure by pulling it to check for resistance.
2. Pair Apple Watch to SoundSwelr’ Smartwatch Series: Press the play button until light and searching noise activate, then pair with “SoundSwell” in your device’s Bluetooth settings. “Use QR code on the back of instructions for videos on pairing setup.
3. Enjoy your music in the moment.

Please use the QR code on the back of the instructions for more videos about the SoondSwell Smartwatch Series.

A) Plus:

• 1 Click: Volume up

B) Play:

• 1 Click: Play/Pause
• 2 Clicks: Next Song
• 3 Clicks: Previous Song
• Hold for 3 seconds: Voice assistant
• Hold for 6 seconds: Power on/off

C) Minus:

1. Click: Volume down

Please recycle or dispose of the battery properly. Contact local recycling facilities and/or the manufacturer for further information.
BATTERY WARNING:
– Do NOT connect improperly.
– Do NOT dispose of in fire or expose to excessive heat.
– Do NOT crush, puncture, incinerate, or short circuit external contacts.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (I) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class 8 digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help
CAN ICES-3 (B)/NMB-3(B)
© 02021 SoundSwell, Inc
MADE IN CHINA

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction

Patent Pending
Contents: SoundSwell’s Smartwatch Series, USB-C charging cable, replacement earbud tips, Apple Watch adapters. Samsung Galaxy Watch adapters, user guide
For videos on how to use your SoundSwell’ Smartwatch Series, scan the QR code below.

https://qrco.de/bbwL6j

Designed by SoundSwell Inc.
Encinitas, California
Built for adventure.
@soundswell_official

| Customer Support;
support@soundswell.com
Soundwell, Inc.
1345 Encinitas Blvd., Suite 444,
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>