Shenzhen Kingboard Technology KTS1225 Bluetooth Speaker User Manual
- June 6, 2024
- Shenzhen Kingboard Technology
Table of Contents
Shenzhen Kingboard Technology KTS1225 Bluetooth Speaker
FEATURES
- True wireless stereo function
- Support USB/TF card
- FM Radio
- AUX-in function
- Karaoke Function
- Rechargeable Lithium battery
SPECIFICATION
ACCESSORY:
- Charging cable: 1 piece;
- Audio cable: 1 piece;
- User manual: 1 piece;
Connect to Bluetooth device
Bluetooth and TWS function
Turn on the both units,start to searching for and select”KTS-1227″ in the list
of Bluetooth devices, When the connection is successful ,the indicate tone
will be on .
How to use True wireless stereo function
If people has 2pcs and both of them has TWS function ,Then turn on both units
,and press any pcs of MODE button few second,then 2pcs unit will connect
automatically.
Note: True wireless stereo function only work in Bluetooth mode .
- POWER ON/OFF :Turn on/off the machine.
- MIC-IN :Microphone-in.
- Aux:3.5mm aux in jack.
- USB slot :Play the MP3 file from USB.
- TF slot: Play the MP3 file from TF card.
- MODE: Change to the different function ,press and hold switch the light on/off.
- Under USB/TF/Bluetooth mode ,short press for play and pause;Under FM mode ,short press :station selection and frequency modulator alternation ,long press for automatic search.
- Under USB/TF/Bluetooth mode ,short press to move to previous channel/track. Press and hold to decrease the volume.
- 11+:Under FM/USB/TF/Bluetooth mode, short press to move to next channel/track. Press and hold to increase the volume
- Press to increase the bass.
- Press to change the flash light mode.
- DC-5V: DC-5V USB charge port.
BLUETOOTH
Turn on the speaker, It comes into the Bluetooth mode directly. After pair the
device, it can play the music, Short time Press ►II to Play/Pause, press and
to Prev and Next. Long time press and to turn down and turn up the Volume.
AUX-IN
AUX-IN, Press the MODE Button to change to Aux mode, plug the audio cable into
AUX jack,Press and hold the, .. ,_ and 11+ buttons to decrease and increase
the volume.
USB/TF CARD
Insert the USB or TF card into the USB/TF slot.it will read the MP3 format
music automatically. Press ►II to Play/Pause, short time press and to Prev.
and Next, press and hold the and buttons to decrease and increase the volume.
FM RADIO
Press the MODE button to change to FM radio mode, and then press the Button to
search FM channel automatically. This operation will scan all FM stations and
Pre-record them to the memory. The scan procedure will take several minutes to
complete and should not be interrupted. Once complete, you can short press and
to move forward or backward. Press and hold the and buttons to decrease and
increase the volume
CHARGING
Plug the USB cable into speaker MICRO USB port and connect to power source.
Red LED on when charging.
FCC COMPLIANCE STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>