Chengdu Wupi Technology WIC911 Wireless Chargers Instruction Manual
- June 6, 2024
- Chengdu Wupi Technology
Table of Contents
Chengdu Wupi Technology WIC911 Wireless Chargers
Product Parameters
Model: WIC911
Input: 12-24V/3A(MAX)
Wireless Output: 15W
Frequency: 110KHz~205KHz
Ambient temperature: -5℃－40℃
Operation Method
- Install the five vehicle-mounted wireless chargers WIC911 on the brackets of the five motorcycles, and insert the special plug for bullet terminals into the special connector for bullet terminals of the five motorcycles.
- Place the wireless receiving position of the mobile device supporting wireless charging on the transmitting area of the wireless charger, press the button switch of the five vehicle-mounted wireless charger, and after the blue and green light alternately flashes for three times, the green or blue light will be long and the charging will begin (the wireless receiving position of the mobile device is generally located in the center of the device).
- When charging is completed or charging needs to be stopped, press the on-board wireless charger control switch again, and the indicator light will go off.
Remark: This car wireless charger is not limited to motorcycle use only.
Indicator LED
Stand-by| Blue light and green light
flash alternately three times
---|---
Working–Fast charging| Green light for a long
Working–Slow charging| Blue light for a long
Metal foreign objects detected or Insufficient input powerout or deviation
from the right position| Blue lights flashing
Notes:
-
Please make sure the phone is placed on the center of the wireless charger.
Deviation from the center will decrease the charging efficiency or interrupt the charging. -
It should be less than 4mm for the thickness of the phone case, and there should be no foreign metal objects in the charging area between the phone and wireless charger. Otherwise, the charging efficiency will be decreased, or the charging could be interrupted, even it could lead to latent danger.
-
It is highly recommended that the ambient temperature should be below 28 degrees Celsius (82.4 degrees Fahrenheit) during the charging period. it could decrease charging efficiency or lead to interruption for the higher ambient temperature.
Safety tips
- Do not put foreign metal objects in the charging area between the phone and wireless charger, which will lead to latent danger.
- Do not put magnetic stripe cards (such as credit cards, telephone cards, bank cards, etc.) or some medical equipment (such as pacemakers or hearing aids) together with this product, which may cause damage to the magnetic stripe or abnormal operation of the equipment.
- Do not apply heavy pressure and place it out of reach of children or animals.
- Do not disassemble, refit and repair the wireless charger by oneself, otherwise it will not be able to carry out normal after-sale service.
Warranty
The warranty of this product is twelve months. Failure or damage not caused by human factors, please contact the purchasing channel or Brand side for after- sales service under warranty.
The warranty does not apply to the following:
- Damage caused by force majeure.
- Failure or damage of the product
- Warranty expired.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guide lines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Useonly the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>