AKKO 3068 Silent Mechanical Keyboard Instructions
- June 6, 2024
- AKKO
Table of Contents
AKKO 3068 Silent Mechanical Keyboard Instructions
Switch to Bluetooth mode
Long press FN+TAB, then the TAB signal light should turn off, meaning the keyboard has exited the wired mode; Then the signal light of the Caps Lock key should blink and the keyboard will enter the bluetooth mode.
Select the bluetooth profile
The keyboard can memorize 3 switchable bluetooth devices,which save in FN+E/R/T; When you first use the keyboard to match, Bluetooth 1 (FN+E) will be the default profile ; You can press FN+E/R/T to select the other bluetooth profile to match the Bluetooth devices; Once it has been setup and paired, whenever you use the keyboard again, it would memorize the last Bluetooth device it has been worked on, trying to send Bluetooth signal to communicate with that specific device.
Bluetooth devices
When you use your PC/ PAD/iPhone to pair with the keyboard, and the bluetooth
mode of the keyboard and PC/PAD/iPhone have all been turned on, the keyboard
would show up with 3 bluetooth profile for each device: Akko 3068-BT1
Akko 3068-BT2
Akko 3068-BT3
Switch the bluetooth profile
After those devices have been paired with the keyboard, long press
FN+E/FN+R/FN+T for at least 3 seconds to quickly switch
between them.
Shut off the keyboard
You can turn off the back power switch of the keyboard while it is unused to save battery; If the keyboard remains unused for over 10 mins, it would go to sleep mode and you can activate it by pressing any key; If you are using Windows and the battery save mode for the system has been turned on, it would affect/delay the sleep activation time of the keyboard.
Reset the keyboard
If you forgot the specific paired front-end device or if the Bluetooth has been in disorder, you can press FN+- to reset the existing Bluetooth profile of the keyboard.