awei HP101 Foldable ANC Function Wireless Headphones User Manual
- June 6, 2024
- awei
Table of Contents
Hello!
HP101
Bluetooth Headset
Foldable ANC Function
Wireless Headphones
User Manual
Dear AWEI User, Thank you for choosing the AWEI product. Your choice is
crucial for us, which means AWEI has added a new user. Hope that we will bring
you a good experience through our products and services. Also hope you will
put forward good advice and suggestions by the official customer hotline,
Weibo, and WeChat, which can help AWEI to constantly improve product and
service.
If you encounter any problems when using the product, please refer to our
service process for convenient and quick help. Your support gives us the
impetus to grow up, and your recognition and feedback are a great
encouragement to AWEI.
AWEI sales team
Introduction
Thank you for purchasing the model AWEI HIFtrit Foldable ANC Function Wireless
Headphones. Pis read this manual before use. Bluetooth wireless communications
Technology introduction
Bluetooth is a kind of wireless technology that supports short-distance
communications (work normally within a distance of 10M) with it you can
exchange information by wireless between many IT digital devices like mobile
phones / wireless earphones/computers etc. Bluetooth technology can
effectively simplify communication between devices, and make data transmission
becomes more rapid and efficient.
Accessories List
1X Wireless Headphone
1X User Manual
1X AUX 3.5mm Audio
1X Type-C Charging Cable
Overview of Headset
- Type-C Charging Port
- LED
- 3.5MM AUX
- Mic
- ANC NO/OFF
- Click Vol(+) / Next Track
- MFB(Power ON/OFF ;Answer/Eed Phone Call;Play/Pause)
- Click Vol (-) /Previous Track
How To Use
Functional Operation
Power on: Press and hold 7 buttons 2 seconds under the device is off (at the
same time the blue LED light flashes), enter the pairing mode freely.
Play/pause: Press 7button to pause when it is playing, then press again to
play.
Volume up: Click 6button.
Volume down: Click 8button.
Previous Track: Long press 8button.
Next Track: Long press 6button.
Answer an incoming call: Click 7button.
Hang up the phone: Click 7button.
Reject incoming call: Hold 7button.
SIRI: Press the 7 key three times.
Power off: Press and hold 7button for 2 seconds when the headset is in standby
or working mode. (At the same time, the blue light comes on for 1 second and
then goes out)
Real a call: Double click 7button(to redial the last number).
Active Noise Cancelling On: Promote5 button for 1 second. The green LED light
will turn on. The function is available at both Wired and Wireless conditions.
Active Noise Cancelling Off: Promote button for 1 second. The green LED light
will turn off. The ANC function must be switched off by manual operation.
Connection
- Ensure that your phone or Bluetooth device is switched on.
- To pair the headset if it has not been previously paired with a device, switch on the headset. The headset enters the pairing mode, and the blue indicator light starts to flash quickly. To pair the headset if it has been previously paired with another device, ensure that the previously paired device is switched off.
- Activate the Bluetooth feature on your phone or Bluetooth devices, and set it to search for Bluetooth devices.
- Select “AWEI HP101 ‘ from the list of found devices on your phone or Bluetooth devices.
- When successfully connected, the blue light turns to continuous light.
The headset that has been previously paired with another device will automatically connect with the device if the device is powered on and within connecting range, if not, the headset will enter standby mode with continuous blue light.
Low battery description
Low Battery Warning: At power-on conditions, when battery voltage is lower
than 3.0V, there will be a warning beep every 60 seconds. Power-Off at Low
Battery Condition: At the power-on conditions, when the battery voltage is
lower than 2.9V, the headset will switch off automatically.
Bluetooth Specification
Bluetooth Version: V5.0
Profile Support: HFP, A2DP, AVRCP
Stand-by Time: 200 h
Talk Time: 14 h
Music Play Time: 13 h
Charging Time: 2 h
Charging Voltage: DC 5V
Frequency Range: 2.402G-2.480G
Ambient Temperature: -201+65°C
Transmission Distance: 10m
Battery Capacity: 300mAh/3.7V I Driver
Specification Driver Unit: 40mm
Sensitivity: 97dB ± 3dB
Impedance : 320 ± 15%
Frequency Response: 20-20000Hz
Safety And Maintenance
Please read the suggestions below in order to help prolong the product lifespan and clearly understand the warranty clauses.
- Keep the product dry, do not put it in humid circumstances to avoid short circuits.
- Do not expose it to the sun or high heat. High heating will shorten the lifespan of electronic components, damage batteries, and deform some plastic parts.
- Do not put it in cold circumstances to avoid damage to the PCB board.
- Do not attempt to take apart the product, especially non-professionals.
- Do not fall, vibrate strongly, strike with hard objects, to avoid damage to the inner electronic circuit.
- Do not use high chemical products, detergents to clean the item.
- Do not scratch the surface with sharp items to avert damaging the case and appearance.
- Do not make it charge 10 hours continuously for the sake of lifespan.
If the product can not work properly, please send it to AWEI authorized
maintenance agents. Our staff will help to solve the problems for you.
Statement: In order to improve product performance we will upgrade products,
the content may change without notice, pls forgive! Thank you for your
purchase.
AWEI
@2021 AWEI Electronics All rights reserved by AWEI.The trademark of Shenzhen
Yale Electronics Co., Ltd is registered in China and other countries,
Counterfeit will investigate! Product Execution Standard: Q/YL 001-2015
Supervised by H.K. Yale International Co., ltd Produced by Shenzhen Yale
Electronics Co., ltd Factory Add: 4th Floor, Building 2, Yujingtai Industrial
Park, Huaxing Road, Longhua District, Shenzhen, China.
Customer service hotline/ Fax:
Tel: +86-755-82999998 Fax: +86-755-83777998
Cooperation mailbox: [email protected]
After-sales service: [email protected]
For more information please visit: www.awei.hk
Contact:
Twitter : https://www.twittercom/aweiearphone
Facebook : https://www.fac,ebook.comlaweiproducts
Instagram :
http://w’wi.instagram.com/aweiearphone
Products after-sales service
1. 7 Days Refund Policy
A. Guarantee of Refund: Within 7 days from the date of purchase, the
manufacturer promises to refund if the product bought from AWEI immediate
store or authorized distributor shops is in quality problem (artificial and
external force damage excluded). B. Refund Procedure: Please take the product,
whole set of packages,s and original invoice to (or please freight pre-paid
to) the shop you bought the product for checking. The seller will check by
Quality Assurance Identification Rules to clarify the problem. If yes, the
seller should refund the money to the user who paid for the product.
2. 15 Days Replacement Policy
A. Guarantee of Replacement: Within 15 days from the date of purchase, the
manufacturer promises to replace if the product bought from AWEI immediate
store or authorized distributor shops is in quality problem (artificial and
external force damage excluded).
B. Replacement Procedure: Please take the product, whole set of package,s and
original invoice to (or please freight pre-paid to) the shop you bought the
product for checking. The seller will check by Quality Assurance
Identification Rules to clarify the problem. If yes, the seller should replace
the product and issue a new invoice to the user. Freight arrangements please
check with the shop you contact.
3. Twelve-Month Warranty Policy
A. Guarantee of Maintenance: Within twelve months since the date of purchase,
the manufacturer promises to offer maintenance service if the product bought
from AWEI immediate store or authorized distributor shops is in quality
problem (artificial and external force damage excluded).
B. Maintenance Procedure: Please take the product, whole set of packages, and
original invoice to (or please freight pre-paid to) the shop you bought the
product for checking. The seller will check by Quality Assurance
Identification Rules to clarify the problem. If yes, the seller should fill
the warranty card with an official stamp and send it back to the manufacturer.
After repairing, the manufacturer sends the product to the seller and the
seller should inform the user to collect it. Freight arrangements please check
with the shop you contact.
4. Quality Assurance Identification Rules
A. Quality Assurance is NOT applicable to those items: accessories like
packing box, pouch, ear clip, and earmuffs; product beyond warranty period;
product got from unauthorized agents or informal channels; fake AWEI product;
AWEI premium; artificial damaged product: external force damaged product. B.
Quality Assurance Identification Procedure: Check warranty period (by original
invoice) — confirm original product (check security code on AWEI official
website) — check product damage (clarity artificial damage and external force
like water, fire, chemicals, or weight crush damages) — check product quality
( to confirm if the testing result conforms to description) —check buying
channel (subject to manufacturer’s verification).
AWEI Warranty Card (please fill this carefully)
Model No.| | Barcode|
---|---|---|---
User Name| | TEL|
Address|
Seller| | Seller Tel|
Seller Add|
Date of
purchase| | Date for
Maintenance|
Damage
situation| | Maintenance
time|
Remark|
FCC Information and Copyright
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC RF warning statement: the device has been evaluated to meet general RF
exposure requirements, The device can be used in portable exposure conditions
without restriction.