awei T50 Pro Smart Touch True Wireless Earbuds with Charging Case User Manual

awei T50 Pro Smart Touch True Wireless Earbuds with Charging Case

Product Information

• Product Name: ttec AirBeat Snap Bluetooth Headphones
• Model Number: UUFDJS#FBU4OBQ

Product Usage Instructions

1. Charge the headphones fully before using for the first time.
   Connect the included USB cable to the headphones and a power source. The LED indicator will turn red during charging and will turn off once fully charged.

2. Power on the headphones by pressing and holding the power button until the LED indicator flashes blue.

3. Activate Bluetooth on your device and search for available devices. Select “ttec AirBeat Snap” from the list of discovered devices.

4. Once connected, you can control the playback of music or answer calls using the buttons on the headphones.

5. To adjust the volume, press the volume up or volume down buttons on the headphones. Press and hold these buttons to skip to the next or previous track.

6. To pause or resume music playback, press the multi-function button on the headphones.

7. To answer or end a call, press the multi-function button once.
   To reject an incoming call, press and hold the multi-function button for 2 seconds.

8. To switch between calls, press the multi-function button twice quickly.

9. When not in use, power off the headphones by pressing and holding the power button until the LED indicator turns off.

10. For optimal performance, keep the headphones within a range of 33 feet (10 meters) from your device and avoid obstacles that may interfere with the Bluetooth signal.

Dear AWEI User,
Thank you for choosing AWEI product. Your choice is crucial for us, which means AWEI has added a new user. Hope that we will bring you a good experience through our products and services. Also hope you will put forward the good advice and suggestions by official customer hotline, Weibo and Wechat in the process of product experience, which can help AWEI to constantly improve product and service. If you encounter any problems in the using product, please refer to service process. Your support is our strongest power, also your recognition and evaluation are a great encouragement to AWEI. Thank you! AWEI sales team

Introduction

Thank you for purchasing the model tec AirBeat Snap smart touch true wireless sport earbuds. Please read this manual before use.

Bluetooth wireless communications Technology introduction Bluetooth is a kind of wireless technology which support short distance communications (work normally within a distance of 10M) with it you can exchange information by wireless between many IT digital devices like mobile phones / wireless earphones / computers etc.

Bluetooth technology effectively simplify the communications which makes device and data transmission quickly and effectively.

Accessories List

• 2X Wireless Earbuds
• 1X Portable Charging Case
• 1X User Manual
• 1X Type-c Charging Cable

Overview Of Headset

How To Use

User Manual

• Power on : Open the charging compartment and take out the headset, the headset will turn on automatically / long touch the MFB 3 seconds.
• Power off: Put earbuds into the charging case and close, turn off automatically or unconnected device, touch the MFB button for 5 seconds.
• Earphone pairing: the left and right earbuds are paired automatically, it is unnecessary to pair.

Pairing
Single Earbud Connection

1. Take out one earbud from charging case.
2. Turn on the Bluetooth of mobile, search pairing name “AWEI T50 Pro”, click and connect. (When the earbud and phone connect successfully, white light continuous flashing and you could also hear prompt tone” Connected”.)

Two Earbuds Connection

1. Open the charging case, earbuds will connect automatically, Master earbuds’ green and white light will flash alternately and earbuds start to enter pairing status. (Now earbuds are in pairing and you could open phone or other Bluetooth devices to connect.)
2. Open phone or other Bluetooth devices, search “tec AirBeat Snap”, click it and connect. (when Bluetooth paired successfully, you will hear “connected”)
3. Re-connect automatically: They will re-connect automatically to paired devices when earbuds turn on. (Premise is that devices’ Bluetooth is on and earbuds paired record still exist.)

(Note)

1. These two earbuds already be paired before delivery. So when you get earbuds, it is unnecessary to pair two earbuds by yourself.
2. If both earbuds cannot be automatically paired (i.e. two earbuds are flash green and white lights alternately at the same time), put the left and right earbuds into the charging case and then take them out. The left and right earbuds will be automatically paired without any other operation.
3. When TWS connect successfully, “L” earphone white indicator flashes slowly, “R” earphone green and white light alternately flashing. Then it’s available to connect with mobile. ( If pairng is not successful, please put back earphones to charging case and repeat above instructions)

Note

• When your earbuds are connected with phone and you find one earbuds no sound, you could turn off bluetooth on phone and put earbuds back to charging case. Then take them out again, these two earbuds will paired successfully within 10 seconds, and only white light continuously flashing
• If the earphone or signal light does not respond, please press MFB for 8 seconds to reset

Button Definition

• Answer incoming call: Touch the MB
• Reject incoming call: Long touch the MB for 2 seconds
• Hang up the phone: Touch the MB
• Play: Touch the MFB Pause: Touch the MB
• Vol + : Long touch the R MFB
• Vol – : Long touch the L MFB
• Next Track: Double touch the R MB (Play status)
• Previous Track: Double touch the L MB (Play status)
• Last number redial: Double touch the MB (Pause status)
• Siri: Touch the L MB three times Game Mode
• ON/OFF: Touch R three times

Status lights

• Earbuds
  Charging, the green light on; Full charge, the light off; Pairing, the green and white light flash;

• Charging Case
  When charging, the red light flashes slowly; after fully charged, the red light is on; when battery is low, the blue light is shining slowly; When discharged, the blue light flashes continuously.

Products Features

1. Waterproof IPX6 Level, Sweat-proof.
2. V5.3 solution, low power consumption, super compatibility.
3. Hands-free function.
4. True wireless earbuds, You can use by single or a pair.

Specifications

Bluetooth Specifications

• Bluetooth version: V5.3
• Supported protocols: HSP, HFP, A2DP, AVRCP
• Standby time: 300 h Talk time: 7 hours
• Music playing time: 6 hours
• Charging time: 1h
• Charging voltage: DC 5V
• Bluetooth operating frequency: 2.402G-2.480G
• Frequency response range: 20-20HZ
• Transmission distance: 10m
• Earbuds battery capacity: 35mAh
• Charging compartment battery capacity: 300mAh

Safety And Maintenance

Please read suggests below in order to helping prolong the product lifespan and clearly understand the warranty clauses.

• • Keep the product dry, do not put it in humid circumstance to avoid short circuit.
• • Do not expose it to the sun or high heat. High heating will short lifespan of electronic components, damage battery and deform some plastic parts.
• • Do not put it in cold circumstance to avoid damage to PCB board.
• • Do not attempt to take apart the product, especially non-professionals.
• • Do not fall, vibrate strongly,strike with hard objects, to avoid damage to inner electronic circuit.
• • Do not use high chemical products, detergent to clean the item.
• • Do not scratch the surface with sharp items to avert damaging the case and appearance.
• • Do not make it charging 10 hours continuously for the sake of lifespan.

If the product can not work properly, please send it to AWEI authorized maintenance agents. Our staff will help to solve the problems for you.

Statement: In order to improve product performance we will upgrade products, the content may change without notice, please forgive! Thank you for your purchase.

AWEI @2022
AWEI Electronics All rights reserved by AWEI. The trademark of Shenzhen Yale Electronics Co.,Ltd registered in China and other countries, Counterfeit will investigate!

Product Execution Standard: Q/YL 001-2015

Supervised by H.K. Yale International Co., It Produced by Shenzhen Yale Electronics Co., Itd Factory Add: 4th Floor, Buidling 2, Yujingtai Industrial Park, Huaxing Road, Longhua District, Shenzhen, China.

Customer service hotline
Fax: Tel: +86-755-82999998
Fax: +86-755-83777998
Cooperation mailbox: yale@awei.hk

After-sales service: service@awei.hk
For more information please visit: www.awei.hk

AWEI
WeChat Contact: twitter https://www.twitter.com/aweiearphone
Facebook : https://www.facebook.com/aweiproducts
Instagram : http://www.instagram.com/aweiearphone

AWEI
WeChat

Products after-sales service

1. 7 Days Refund Policy

2. A. Guarantee of Refund: Within 7 days since the date of purchase, the manufacturer promises to refund if the product bought from AWEI immediate store or authorized distributor shops is in quality problem (artificial and external force damage excluded).

3. B. Refund Procedure: Please take the product, whole set of package and original invoice to (or please freight pre-paid to) the shop you bought the product for checking. The seller will check by Quality Assurance Identification Rules to clarify the problem. If yes, the seller should refund the money to the user paid for the product.

4. 15 Days Replacement Policy A. Guarantee of Replacement:
   Within 15 days since the date of purchase, the manufacturer promises to replace if the product bought from AWEI immediate store or authorized distributor shops is in quality problem (artificial and external force damage excluded. B. Replacement Procedure: Please take the product, whole set of package and original invoice to (or please freight pre-paid to) the shop you bought the product for checking. The seller will check by Quality Assurance Identification Rules to clarify the problem. If yes, the seller should replace the product and issue a new invoice to the user. Freight arrangements please check with the shop you contact.

5. Twelve-Month Warranty Policy

6. A. Guarantee of Maintenance: Within twelve months since the date of purchase, the manufacturer promises to offer maintenance service if the product bought from AWEI immediate store or authorized distributor shops is in quality problem (artificial and external force damage excluded).

7. B. Maintenance Procedure: Please take the product, whole set of package and original invoice to (or please freight pre-paid to) the shop you bought the product for checking. The seller will check by Quality Assurance Identification Rules to clarify the problem. If yes, the seller should fill warranty card with official stamp and send back to manufacturer. After repairing, manufacturer sends the product to the seller and the seller should inform the user to collect it. Freight arrangements please check with the shop you contact.

8. Quality Assurance Identification Rules

9. A. Quality Assurance is NOT applicable to those items: accessories like packing box, pouch, ear clip and earmuffs; product beyond warranty period; product got from unauthorized agents or informal channels; fake AWEI product; AWEI premium; artificial damaged product; external force damaged product.

10. B. Quality Assurance Identification Procedure: Check warranty period (by original invoice) confirm original product (check security code on AWEI official website) – – check product damage (clarity artificial damage and external force like water, fire, chemicals or weight crush damages) check product quality ( to confirm if the testing result is conform to description) -check buying channel (subject to manufacturer’s verification).

AWEI Warranty Card (please fill this carefully)

Model No.
Barcode
User Name
TEL
Address Seller
Seller
Tel
Seller Add
Date of purchase
Date for Maintenance
Date of purchase
Damage situation
Remark
Date for Maintenance
Maintenance time

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>