awei T50 Pro Smart Touch True Wireless Earbuds User Manual

awei T50 Pro Smart Touch True Wireless Earbuds User Manual

Dear AWEI User,

Thank you for choosing AWEI product. Your choice is crucial for us,which means AWEI has added a new user. Hope that we will bring you a good experience through our products and services. Also hope you will put forward the good advice and suggestions by official customer hotline, Weibo and Wechat in the process of product experience,which can help AWEI to constantly improve product and service.
If you encounter any problems in the using product, please refer to service process. Your support is our strongest power, also your recognition and evaluation are a great encouragement to AWEI. Thank you!
AWEI sales team

Introduction

Thank you for purchasing the model AWEI T50 Pro smart touch true wireless sport earbuds. Please read this manual before use.
Bluetooth wireless communications Technology introduction Bluetooth is a kind of wireless technology which support short distance communications (work normally within a distance of 10M) with it you can exchange information by wireless between many IT digital devices like mobile phones / wireless earphones / computers etc. Bluetooth technology effectively simplify the communications which makes device and data transmission quickly and effectively.

Accessories List

2X Wireless Earbuds 1X User Manual 1X Portable Charging Case 1X Type-c Charging Cable

Overview Of Headset

How To Use

1. User Manual Power on: Open the charging compartment and take out the headset, the headset will turn on automatically / long touch the MFB 3 seconds. Power off: Put earbuds into the charging case and close, turn off automatically or unconnected device, touch the MFB button for 5 seconds. Earphone pairing: the left and right earbuds are paired automatically, it is unnecessary to pair.

2.  Pairing Single Earbud Connection 1. Take out one earbud from charging case.

3. Turn on the bluetooth of mobile, search pairing name “AWEI T50 Pro”, click and connect. (When the earbud and phone connect successfully, white light continuous flashing and you could also hear prompt tone”Connected”.)
   Two Earbuds Connection 1. Open the charging case, earbuds will connect automatically, Master earbuds’ green and white light will flash alternately and earbuds start to enter pairing status. (Now earbuds are in pairing and you could open phone or other Bluetooth devices to connect.) 2

4. Open phone or other Bluetooth devices search “AWEI T50 Pro”, dick it and connect. (when Bluetooth paired successfully, you will hear” connected”) 3.Re-connect automatically: They will re-connect automatically to paired devices when earbuds turn on. (Premise is that devices’ Bluetooth is on and earbuds paired record still exist. )

How To Use

(Note:

1. These two earbuds already be paired before delivery. So when you get earbuds. It Is unnecessary to pair two earbuds by yourself.

2. If both earbuds cannot be automatically paired (i.e. two earbuds are flash green and white lights alternately at the same time), put the left and right earbuds into the charging case and then take them out.
   The left and right earbuds will be automatically paired without any other operation.

3. When TWS connect successfully, 1.” earphone white indicator flashes slowly, 12- earphone green and white light alternately flashing. Then it’s available to connect with mobile. ( If palmg Is not successful please put back earphones to charging case and repeat above instructions)

Note: 1 When your eabuds are connected with phone and you find one earbuds no sound, you could turn off bluetooth on phone and put earbuds back to charging case. Then take them out again, these two earbuds will paired successfully within 10 seconds, and only white light continuously flashing. 2.1f the earphone or signal light does not respond, please press MFB for 8 seconds to reset

How To Use

1. Button Definition Answer incoming call: Touch the MFB Reject incoming call: Long touch the MFB for 2 seconds Hang up the phone: Touch the MFB Play:
   Touch the MFB Pause: Touch the MFB Vol + : Long touch the R MFB Vol – : Long touch the L MFB Next Track: Double touch the R MFB (Play status) Previous
   Track: Double touch the L MFB (Play status) Last number redial: Double touch the MFB (Pause status) Siri: Touch the L MFB three times Game Mode ON/OFF:Touch R three times 1 Status lights 1.
   Earbuds Charging, the green light on; Full charge, the light off; Pairing, the green and white light flash; 2. Charging Case When charging, the red light flashes slowly; after fully charged, the red light is on; when battery is low, the blue light is shining slowly; When discharged, the blue light flashes continuously. 1 Products Features 1. Waterproof IPX6 Level, Sweat-proof. 2. V5.3 solution, low power consumption, super compatibility.

2. Hands-free function. 4.

3. True wireless earbuds, You can use by single or a pair.

Specifications

Bluetooth Specifications Bluetooth version: V5.3 Supported protocols: HSP, HFP, A2DP, AVRCP Standby time: 300 h Talk time: 7 hours Music playing time: 6 hours Charging time: 1 h Charging voltage: DC 5V Bluetooth operating frequency: 2.402G-2.480G Frequency response range: 20-20HZ Transmission distance: 10m Earbuds battery capacity: 35mAh Charging compartment battery capacity: 300mAh

Safety And Maintenance

Please read suggests below in order to helping prolong the product lifespan and dearly understand the warranty clauses.

• Keep the product dry, do not put it in humid circumstance to avoid short circuit.
• Do not expose it to the sun or high heat. High heating will short lifespan of electronic components, damage battery and deform some plastic parts.
• o not put it in cold circumstance to avoid damage to PCB board. * Do not attempt to take apart the product, especially non-professionals.
• Do not fall, vibrate strongly,strike with hard objects, to avoid damage to inner electronic circuit. * Do not use high chemical products,detergent to clean the item.
• Do not scratch the surface with sharp items to avert damaging the case and appearance. * Do not make it charging 10 hours continuously for the sake of lifespan. If the product can not work properly. please send it to AWEI authorized maintenance agents. Our staff will help to solve the problems for you.
  Statement: In order to improve product performance we will upgrade products, the content may change without notice, please forgive! Thank you for your purchase.

AWEI @2022 AWEI Electronics All rights reserved by AWEI.The trademark of Shenzhen Yale Electronics Co.,Ltd registered in China and other countries,Counterfeit will investigate! Product Execution Standard: Q/YL 001-2015
Supervised by H.K. Yale International Co., ltd Produced by Shenzhen Yale Electronics Co., ltd Factory Add: 4th Floor, Buidling 2, Yujingtai Industrial Park, Huaxing Road, Longhua District, Shenzhen, China.
Customer service hotline/ Fax: Tel :+86-755-82999998 Fax :+86-755-83777998 Cooperation mailbox:yale@awei.hk After-sales service:service@awei.hk
For more information please visit: www.awei.hk

Products after-sales service

• 7 Days Refund Policy A. Guarantee of Refund: Within 7 days since the date of purchase, the manufacturer promises to refund if the product bought from AWEI immediate store or authorized distributor shops is in quality problem (artificel and external force damage excluded).
  B. Refund Procedure: Please take the product, whole set of package and original invoice to (or please freight pre-paid to) the shop you bought the product for checking.
  The seller will check by Quality Assurance Identification Rules to clarify the problem. If yes, the seller should refund the money to the user paid for the product.
  2. 15 Days Replacement Policy A. Guarantee of Replacement: Within 15 days since the date of purchase, the manufacturer promises to replace if the product bought from AWEI immediate store or authorized distributor shops is in quality problem (artifical and external force damage excluded). B. Replacement Procedure: Please take the product, whole set of package and original invoice to (or please freight pre-paid to) the shop you bought the product for checking. The seller will check by Quality Assurance Identification Rules to clarify the problem. If yes, the seller should replace the product and issue a new invoice to the user. Freight arrangements please check with the shop you contact. 3. Twelve-Month Warranty Policy A. Guarantee of Maintenance: Within twelve months since the date of purchase, the manufacturer promises to offer

AWEI Warranty Card (please fill this carefully)

FCC Caution:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restrictio

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>