IMOU T2.00250635 Doorbell Chime User Guide
- June 6, 2024
- imou
Table of Contents
Doorbell
Chime Quick Start Guide
V1.0.0
www.imoulife.com
Welcome
Thank you for choosing IMOU.
We are devoted to providing you with easy smart home products. If you have
problems using the product, please contact our service team at
[email protected] before
returning your product.
Package Contents
Overview
Front View
LED Status
|
Device Status
---|---
Solid green| Operating correctly Setup successful
Flashing green| Ready to set up the device
Solid red| Booting/Restarting Resetting to factory default
Flashing red| Network disconnected
Flashing green and red| Updating ‑firmware
Off| Power disconnected
Back View
How to reset the camera
Press and hold the reset button for 10 s until the LED turns solid red.
Set Up the Device
Scan the QR code below, search for “I’m Life” in the app store, or navigate to Support > Download Center on our social website to download and install the app.
http://mobile.easy4ipcloud.com/imou/detect.html
**** If you already use the app, make sure that you are using the latest version.
To ensure the best possible wireless performance, please make sure there are no obstacles and electromagnetic interference between the device and the router.
The
app will guide you through the setup process.
Install the Chime
** The chime needs high voltage power supplies that might cause injury or
damage. Before getting started, turn o the power at the breaker, and make sure
that no power is going to your doorbell system.
Step 1 Place the power pin onto the rear side of the chime and then press
it down to t the two parts together.
Step 2** Slide the power pin upwards to secure it. A click sound will
indicate that it is locked in.
How to detach the power pin from the chime
Press the release button and meanwhile slide down the power pin to remove it.
Step 3 Plug your chime into the power outlet where you can
hear the ringtone easily. It is recommended that the chime be located between
the Wi-Fi router and the doorbell. Place them as close to each other as
possible for optimal performance.
Step 4 (optional) Install the video doorbell. For details, please refer
to the doorbell guide.
**** Please link the chime to your doorbell on the device setting page of the
doorbell; otherwise, your chime cannot work.
Troubleshooting
Q: Failed to set up the device?
- Ensure your smartphone and the device are within range of your Wi-Fi router (recommended to be no more than 5 m (16 ft). If the location where the chime is installed has a weak signal, consider adding a Wi-Fi extender between your router and the doorbell.
- Ensure the LED on the device is flashing green before setup.
- Reset the device, and then set it up again.
Q: The chime does not ring after I press the doorbell?
- Ensure the chime has been linked to the doorbell. On the device setting page of the doorbell, tap Link Chime, select the correct chime type and then follow on-screen instructions.
- Ensure the chime is online and Audio Alert toggles on. On the device setting page of the chime, tap Chime Sound to and Audio Alert.
- If Snooze Alert (in Chime Sound) toggles on, the chime ringing within the snooze schedule will be silenced.
Q: How to pair the doorbell to the chime?
- After setting up the chime, on its setting page, tap Quick Setup, and then follow on-screen instructions.
- Switch the WLAN of the doorbell to the one from the chime.
Q: My chime has been linked to the doorbell, but live streaming of the doorbell is poor?
- Install the chime between the doorbell and the router, such as the hallway.
- Check if your network is stable and at least 2 Mbps of the bandwidth is required.
Q: The device is one?
- If the LED is ashing red, check whether the router can connect to the Internet. If the network is connected, restart the device. If the device is still one, reset it.
Q: How to update the firmware?
You can update the rmware through the “I’m Life” app in Devices Settings >
Firmware. It shows a red dot when an update is available. The chime will
restart automatically when it finishes the update.
For more questions, please scan the QR code or visit:
www.imoulife.com/support/help
@imouglobal
E [email protected]
Legal and Regulatory Information
Legal Considerations Video surveillance can be regulated by laws that vary
from country to country. Check the laws in your local region before using this
product for surveillance purposes
Disclaimer
Every care has been taken in the preparation of this document. Please inform
your nearest Dahua office of any inaccuracies or omissions. Dahua Technology
shall not be held responsible for any technical or typographical errors and
reserves the right to make changes to the product and manuals without prior
notice. Dahua Technology makes no warranty of any kind with regard to the
material contained within this document, including, but not limited to, the
implied warranties of merchantability and fitness for a particular purpose.
Dahua Technology shall not be liable or responsible for incidental or
consequential damages in connection with the furnishing, performance, or use
of this material. This product is only to be used for its intended purpose.
Intellectual Property Rights
Dahua Technology retains all intellectual property rights relating to
technology embodied in the product described in this document
Equipment Modifications This equipment must be installed and used in strict
accordance with the instructions given in the user documentation. This
equipment contains no user-serviceable components. Unauthorized equipment
changes or modifications will invalidate all applicable regulatory
certifications and approvals.
Trademark Acknowledgments
HOCVI, are registered trademarks or trademark applications of Dahua Technology
in various jurisdictions. All other company names and products are trademarks
or registered trademarks of their respective companies
Regulatory Information
European Directives Compliance
This product complies with the applicable CE marking directives and standards:
- Low Voltage (LVD) Directive 2014/35/EU
- Electromagnetic Compatibility (EMC) Directive 2014/30/EU
• Restrictions of Hazardous Substances (RoHS) Directive 2011/65/EU and its
amending Directive (EU) 2015/863.
A copy of the original declaration of conformity may be obtained from Dahua
Technology.
The most up to date copy of the signed EU Declaration of Conformity (DoC) can
be downloaded from:
www.dahuasecurity.com/support/notice/
CE-Electromagnetic Compatibility (EMC)
This digital equipment is compliant with Class B according to EN 55032 CE- Safety This product complies with IEC/EN/UL 60950-1 or IEC/EN/UL 62368-1, Safety of Information Technology Equipment. Declaration of Conformity CE (Only for the product has RF function) Hereby, Dahua Technology declares that the radio equipment is compliant with Radio Equipment Directive (RED) 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address www.dahuasecurity.conn/support/notice/
USA Regulatory Compliance
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
FCC DOC Statement can be downloaded from https://us.dahuasecurity.com/support/notices/
RF exposure warning
(Only for the product that has RF communication function)
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Canada Regulatory Compliance ICES-003
This Class B digital apparatus complies with Canadian ICES-003 Cet appareil
numOrique de la classe B est conforme u la norme NMB-003 du Canada.
This device complies with Industry Canada licence-exempt RSS standard(s)
Operation is subject to the following two conditions
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may
cause undesired operation of the device. Le present appareil est conforme aux
CNR d’Industrie Canada applicables aux appareils radioexempts de licence.
RF exposure warning
(Only for the product that has RF communication function)
This equipment should be installed and operated with a minimum distance of
20cm between the radiator and your body.
Cet equipement dolt etre installe et utilise a une distance minimale de 20 cm
entre le radiateur et votre corps.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry
Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformement a la reglementation d’Industrie Canada, le present Ornetteur radio peut fonctionner avec une antenne d’un type et dun gain maximal (ou inferieur) approuve pour l’emetteur par Industrie Canada. Dans le but de reduire les risques de brouillage radioelectrique a (‘intention des autres utilisateurs, it faut choisir le type d’antenne et son gain de sorte que la puissance isotrope rayonnee equivalente (p.i.r.e.) ne depasse pas l’intensito necessaire a l’otablissement d’une communication satisfaisante
Japan Regulatory Compliance
VCCI
These products comply with the requirements of VCCI Class B Information
Technology Equipment.
Batteries
Correct disposal of batteries in this product
**** This marking on the battery indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd, or Pb indicate that the battery contains mercury, cadmium, or lead above the reference levels in Directive 2006/66/EC and its amending Directive 2013/56/EU. If batteries are not properly disposed of, these substances can cause harm to human health or the environment.
CAUTION
Risk of explosion if the battery is replaced by an incorrect type. Dispose of
used batteries according to the instructions Safety The product complies with
IEC/EN/UL 60950-1, Information Technology Equipment — Safety — Part 1: General
Requirements; or complies with IEC/EN/UL 62368-1, Audio/video, information and
communication technology equipment —Part 1: Safety requirements. If the power
supply to the product is from an external power adaptor without connecting to
AC Mains, and the product is not shipped with a power adaptor, customers are
required to use the external power adaptor that must fulfill the (LPS)
requirements for Safety Extra Low Voltage (SELV) and Limited Power Source.
Waste Electrical and Electronic Equipment (WEEE) statements Disposal and Recycling
When this product has reached the end of its useful life, dispose of it according to local laws and regulations. For information about your nearest designated collection point, contact your local authority responsible for waste disposal. In accordance with local legislation, penalties may be applicable for incorrect disposal of this waste.
**** This symbol means that the product shall not be disposed of together with household or commercial waste. Directive 2012/19/EU on waste electrical and electronic equipment (WEEE) is applicable in the European Union member states. To prevent potential harm to human health and the environment, the product must be disposed of in an approved and environmentally safe recycling process. For information about your nearest designated collection point, contact your local authority responsible for waste disposal. Businesses should contact the product supplier for information about how to dispose of this product correctly.
Privacy Protection Notice
As the device user or data controller, you might collect personal data of others such as the face, fingerprints, car plate number, Email address, phone number, GPS, and so on. You need to be in compliance with the local privacy protection laws and regulations to protect the legitimate rights and interests of other people by implementing measures, including but not limited to providing clear and visible identification to inform data subject the existence of surveillance area and providing related contact.
About the Manual
- The manual is for reference only. If there is any inconsistency between the manual and the actual product, the actual product shall prevail.
- We are not liable for any loss caused by the operations that do not comply with the manual.
- The manual would be updated according to the latest laws and regulations of related jurisdictions. For detailed information, refer to the paper manual, CD-ROM, QR code, or our official website. If there is any inconsistency between the paper manual and the electronic version, the electronic version shall prevail
- All the designs and software are subject to change without prior written notice. The product updates might cause some differences between the actual product and the manual. Please contact customer service for the latest program and supplementary documentation.
- There still might be a deviation in technical data, functions and operations description, or errors in print. If there is any doubt or dispute, we reserve the right of final explanation.
- Upgrade the reader software or try other mainstream reader software if the manual (in PDF format) cannot be opened.
- All trademarks, registered trademarks, and the company names in the manual are the properties of their respective owners.
- Please visit our website, contact the supplier or customer service if there is any problem occurring when using the device.
- If there is any uncertainty or controversy, we reserve the right of final explanation
Support
Should you require any technical assistance, please contact your Dahua distributor. If your questions cannot be answered immediately, your distributor will forward your queries through the appropriate channels to ensure a rapid response If you are connected to the Internet, you can:
- Download user documentation and software updates
- Search by product, category, or phrase.
- Report problems to Dahua support staff by logging in to your private support area.
- Chat with Dahua support staff.
- Visit Dahua Support at www.dahuasecurity
Contact Information
ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD Address: No.1199, Bin’an Road,
Binjiang District, Hangzhou, P.R. China
Postcode: 310053
Tel: +86-571-87688883
Fax: +86-571-87688815
Email: [email protected]
Website: www.dahuasecurity.com
Important Safeguards and Warnings
This Chapter describes the contents covering proper handling of the device,
hazard prevention, and prevention of property damage. Read these contents
carefully before using the device, comply with them when using, and keep it
well for future reference
Safety Instructions
The following categorized signal words with defined meaning might appear in
the manual
| Signal Words | Meaning |
|---|
Danger
| Indicates a high potential hazard that, if not avoided, will result in
death or serious injury.
WARNING| Indicates a medium or low potential hazard which, if not
avoided, could result in slight or moderate injury.
Caution| This indicates a potential risk which, if not avoided, could
result in property damage, data loss, lower performance, or unpredictable
result.
KEY| Provides methods to help you solve a problem or save you time
NOTE| Provides additional information as the emphasis and supplement to
the text.
Safety Requirement
- Abide by local electrical safety standards to ensure that the voltage is stable and complies with the power supply requirement of the device.
- Transport, use, and store the device under the allowed humidity and temperature conditions. Refer to the corresponding technical specifications of the device for specific working temperature and humidity.
- Do not place the device in a location exposed to dampness, dust, extreme hot or cold, strong electronic radiation, or unstable lighting conditions.
- Do not install the device in a place near the heat source, such as a radiator, heater, furnace, or another heat-generating device to avoid fire.
- Prevent liquid from flowing into the device to avoid damage to internal components.
- Install the device horizontally or install it in a stable place to prevent it from falling.
- Install the device in a well-ventilated place, and do not block the ventilation of the device.
- Do not disassemble the device arbitrarily.
- Avoid heavy stress, violent vibration, and soaking during transportation, storage, and installation. The complete package is necessary during transportation.
- Use the factory package or the equivalent for transportation
Battery
Low battery power affects the operation of the RTC, causing it to reset at
every power-up. When the battery needs replacing, a log message will appear in
the product’s server report. For more information about the server report, see
the product’s setup pages or contact Dahua support
WARNING
- Risk of explosion if the battery is incorrectly replaced
- Replace only with an identical battery or a battery which is recommended by Dahua.
- Dispose of used batteries according to local regulations or the battery manufacturer’s instructions