Shenzhen Eview Gps Technology EV-05 Personal Safety Watch User Manual

Smart Watch

The smartwatch is designed for the elderly and lone workers. The watch combines many intelligent functions, such as SOS alarm, two-way talking, heart rate,  pedometer, and so on. The operation is very simple. Please read this operation guide carefully before using it.

Getting To Know Your Watch

| |
---|---|---

Accessories

SIM Card Installation

Please do as the below picture shows.

1. Remove Strap from the watch.
2. Remove the SIM card holder from the watch and put a Nano-SIM on the holder.
3. Put the holder back and lock the strap on a watch.

Charging your Watch

|
---|---

• Connect the USB cable from the charging base to the AC adaptor.
• Place the watch into the charging base correctly, you will hear spoken confirmation “your watch is charging”.
• Please fully charge the battery daily for around 2 hours or when the battery is low.

TIP The watch battery is not removable. After a long period of inactivity, the watch may not be turned on due to low battery. please charge it every day to ensure that the watch can work normally.

Functions and Basic Settings

When the watch is turned on, slide leftwards or rightwards to view all available functions. it displays Watch Face, Weather, Heart Rate, Contact, Steps, and Settings.

1. At watch face, you can see time, date, heart rate, and steps.
2. There are two watch faces for your option. Sliding right to the end and click settings, select watch face and choose what you like by sliding left and right.

Making a phone call

• Slide rightwards to enter the interface of Contact, select the contact person, and make a call.

Steps

• Keep sliding right to enter the interface of Steps, step counting is enabled by default and opened all day. You can also view distance and consumed calories.
  www.eviewgps.com

Heart Rate Measurement

• Wear the watch on the left hand and click the heart rate, after several seconds of checking, the screen will display your heart rate BPM.

Activating an SOS Alarm

There are two ways to activate the SOS alarm.

1. Press the side button for 3 seconds until you feel the watch vibrate.

2. When the screen is on, long-press the screen for 3 seconds until you feel the watch vibrate.

• After the SOS alarm is activated, you will hear a voice prompt confirming the activation of the SOS alert and allowing you approximately 10 seconds to cancel the alarm. If the SOS is not canceled in time an SOS alert text message is immediately sent to the emergency contact numbers followed by the outgoing calls.
• If the watch fails to connect to the first number, it will call the second number after a delay of 10 seconds. In case the second number fails to be connected as well, the system will connect to the third number, etc.
• Between each call, it will have 10 seconds delay, during this time, the user can stop the call sequence or prevent a possible false alarm by pressing the SOS button.

Notes on Voicemail

We advise emergency contacts to switch off any voice mail facility on their phone to prevent delay in reaching help. However, the followin safeguards are used if a voicemail is reached:

• The wearer can end the current call by clicking the SOS button and the calling sequence to continue if the voice mail does not automatically disconnect.
• Emergency contact can call back to the watch if they are disconnected. Remember that the watch may be already called the next contact unless the calling sequence has been stopped.

Fall Alarm

The watch can automatically detect a fall. When this occurs the watch will give a warning message to the user.

• some daily activities like sports or even sitting down abruptly can trigger the fall alarm.
• The wearer has a short time to cancel a fall alarm by clicking the Cancel on the watch. If the alarm is not canceled, emergency contacts will be called.
  TIP
  It is possible that the watch will not detect every real fall. We strongly advise the wearer to press the SOS button in any emergency situation, if they are able.

Getting a GPS fix

To get an initial GPS fix, go outdoors or near a window so the watch can get a fix on the satellites. This could take a few minutes depending on your environment.

TIP
GPS functionality may be unavailable or inaccurate in some locations (for example, availability or accuracy of GPS location may be impacted inside buildings or near tall buildings or other tall features or underground).

• The watch also provides Wi-Fi, LBS positioning, when GPS is unavailable, it will switch to Wi-Fi and LBS for locating.
• The home Wi-Fi and beacons provide at-home home information in addition to optimizing watch battery life.
• Please note Wi-Fi and LBS tracking service is not 100% accurate, it can be used to approximate your location only.

General Specifications

1. Dimension: 47.5mm16.9mm/1.87in0.66in.
2. Weight: 65g/2.29oz.
3. Battery: Rechargeable, 3.7V,580mAh.
4. Charging voltage: 5V DC.
5. Waterproof: IPX8.
6. 4locating technologies: GPS, BLE, Wi-Fi, LBS.

• TIP
  Please comply with the instructions to extend the watch life:

• Don’t use & store the watch in dusty, hot, cold, electric, chemical, areas. Please always keep the watch and accessories dry.

• Don’t drop, shake or knock the watch, Rough handling can break it.

• Clear the watch with a piece of dry cloth. Don’t clean in chemicals, detergent.

• Don’t disassemble or refit the watch as it will void your warranty.

• Using other batteries will cause unwanted situations.

• To avoid accidents, never play the watch while driving.

• Please turn off the watch in the aircraft and follow any restrictions. Wireless devices can cause interference in aircraft.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>