Shenzhen Kenong Gardening Technology Z206WIFI Intelligent Planter Instruction Manual

Shenzhen Kenong Gardening Technology Z206WIFI Intelligent Planter

Indoor Planting

If you like gardening, but your space is limited? Then you can create your own garden with automatic irrigation function. This garden is suitable for indoor use, whether in the kitchen, windowsill or living room bedroom, you can plant your favorite vegetables and flowers all year round.

Lightweight and Portable

Put it wherever you want, you can plant your favorite plants and vanilla series of basil, thyme, sage, parsley, parsley, cherry tomato, rosemary, pepper, flowers and even strawberries, which can be a perfect match.Please enjoy fresh fruits, vegetables and herbs free of pests and agricultural residues.

Products Introduction

Installation Steps

1. Take Out the Accessories

   • Light Board
     

   • Planting Machine Panel
     

   • Telescopic Aluminum Rod

   • Circulating Water Pump
     

   • Hole Cover * 6
     

   • Seedling Cover and Planting Basket * 12
     

   • Sticker * 12
     

   • Adapter
     

2. Insert the telescopic aluminum rod into the planting box.
   

3. Press the lamp panel tightly on the telescopic aluminum rod.
   

4. Insert the power cord Into the corresponding port on the lamp board.
   

5. Lay the planting panel on the machine.
   

6. Aller soiling the seeds In water for 6 hours In advance. put them into the bottom of planting hole after soaking in water tor 5 minutes.
   

7. Put the planting basket on the planting block and put It into the hole of the planting panel. cover the seedling cover and tum on the full light.
   

8. Add fresh water into the water tank to the water level of 6.5L, keep the water level gently touching the bottom of planting cotton, and do not add excessive water.
   

9. 1-3 days to observe whether the seed gemination, the first seed germination can immediately remove the seeding cover in order to prevent overgrowth. After the seeds sprouted leaves, the nutrient solution was added in proportion.
   

10. During the growth period the water source in the water storage tank should be nutrient solution water and the proportion is shown in the nutrient solution manual. Generally nutrient solution should be added once a week.
    

How to Configure Nutrient Solution

1. Nutrient particles have storage life of 2 years in unopened bottles if stored at the ambient temperature without exposure to sunlight.
2. Well-mixed nutrient solution prepared by adding water have storage life of 5 months without exposure to sunlight.
3. If there is precipitation, it’s a normal phenomenon.
4. Keep it beyond the reach of children and pets.

A/B FERTILIZER REFILL PACK

After the nutrient solution in the bottle is completely used up, piece the Solid Nutrient Refill Pack into the corresponding bottles. Add full water and shake bottles to fully mix nutrient solutions. Please refer to the <Plant Food> use method.

Configure Nutrient Solution

1. Fulfill the bottle containing A and B solid nutrient particles with purified water and shake bottles to fully mix the content.
2. Use the cap of the bottle as a measure. Add 5ml A and B nutrient solution into each 1L water.

How to Prevent Mosquito Erosion

When the plants grow too dense, if it is not necessary to plant too many plants, the hole cover can be used to cover the seedling hole, which can not only prevent insects from entering, but also prevent the growth of green algae in the water tank.

Seedling cover can effectively create a heat preservation, moisture preservation and easy rooting environment for seeds at the initial stage of germination, and protect the early seedlings from insect damage.

What is Soilless Culture?

Soilless Culture refers to the method of using nutrient solution or solid matrix plus nutrient solution instead of soil to cultivate crops.

Introduction to Touch Panel

After working for 30 minutes, it will automatically sleep for 30 minutes and then the cycle will start or stop automatically. After manually timing off the fan/water pump for 10 hours, it will be turned on again intelligently.
Click the on key to start the machine, turn on the fan / water pump set the light compensation mode according to the needs with power-off memory function. After a sudden power failure the intelligent memory of the planter is locked, and the planter still works according 10 the set mode after power on. (after 16 hours of light compensation, the fan / water pump turns on intelligently.) then touch the on key for three seconds to enter the wireless configuration (WIFI version only).

If this mode is selected for leafy vegetables and foliage plants it will fill light for 16 hours and sleep for 8 hours. When the power is turned on, the light compensation mode will be turned off manually, and it will be turned on again after 10 hours. It still works again according to the set mode, that is light compensation for 16 hours end sleep for 8 hours.

If this mode is selected for planting melons fruits and ornamental plants. It will fill light for 16 hours and sleep for 8 hours. When the power is turned on, the light compensation mode will be turned off manually, and it will be turned on again after 10 hours. It still works again according to the set mode, that is light compensation for 16 hours and sleep for 8 hours.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>