InstallBay IBR64 Bluetooth Audio Receiver User Manual

InstallBay IBR64 Bluetooth Audio Receiver

Overview

Pairing your device (required for operation):

1.  Ensure your streaming device has Bluetooth®enabled and tha t power is applied to the IBR64.(The blue LED on the I BR64 will blink to indicate it is in pairing mode.)
2.  Within your streaming device’s Bluetooth ® setup menu, select “I BR64” from the list of pairable devices.
3. When successfully connected, the Blue LED on the I BR64 will stop blinking and remain lit. A single beep will be heard through the connected audio system.
4.  Connecting the blue wire (remote out) to the amplifier (re mote in) to turn the amplifier on/off via IBR64

Multiple devices can be paired to the IBR64, but only one streaming device can be connected at one time. The IBR64 will remember the last device that was connected to it and re connect with it automatically. If that streaming device is not active , then other paired streaming devices can connect manually, or new streaming devices can be paired.
When a connected streaming device is out of range for more than one minute, the IBR64 will automatically disconnect this streaming device and return to pairing mode (LED will blink). Controlling audio play back:

1. Once connected, audio is controlled from the streaming device. This includes volume and media selection.
2.  The I BR64 can be installed out of sight, as it has no user controls that need to be accessed.

NOTE: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS B DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE IN A RESIDENTIAL INSTALLATION. THIS EQUIPMENT GENERATES USES AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTIONS, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS.

HOWEVER, THERE IS NO GUARANTEE THAT INTERFERENCE WILL NOT OCCUR IN A PARTICULAR INSTALLATION. IF THIS EQUIPMENT DOES CAUSE HARMFUL INTERFERENCE TO RADIO OR TELEVISION RECEPTION, WHICH CAN BE DETERMINED BY TURNING THE EQUIPMENT OFF AND ON, THE USER IS ENCOURAGED TO TRY TO CORRECT THE INTERFERENCE BY ONE OR MORE OF THE FOLLOWING MEASURES:

• REORIENT OR RELOCATE THE RECEIVING ANTENNA.
• INCREASE THE SEPARATION BETWEEN THE EQUIPMENT AND RECEIVER.
• CONNECT THE EQUIPMENT INTO AN OUTLET ON A CIRCUIT DIFFERENT FROM THAT TO WHICH THE RECEIVER IS CONNECTED.
• CONSULTTHE DEALER OR AN EXPERIENCED RADIO/TV TECHNICIAN FOR HELP

CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

1.  THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
2. THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>