ZTE True Wireless Stereo Bluetooth Earphones User Guide
- June 6, 2024
- ZTE
Table of Contents
ZTE True Wireless Stereo Bluetooth Earphones User Guide
Package Content
True Wireless Stereo (TWS)
Charging Case x1
User Guide x1
Bluetooth Earphones x1
Type C Charging Cable x1
Product Illustrations
First Time Use
If the battery level of the Earphones and the charging case are low when the package is opened for the first time, please charge for 10 minutes.
Bluetooth Connection
When the charging case is opened and connection is made for the first time,
the Earphones will automatically turn on and enter the pairing mode with the
device; click “ZTE Buds” in the device list to connect.
If the Earphones have been paired with a device previously, it will
automatically connect to the last connected device after the case is opened.
Disconnect Bluetooth
After the two Earphones are placed into the charging case, the Bluetooth connection to the device is disconnected after the charging case is closed.
Clearing Connection Records
Place the two Earphones in the charging case and simultaneously press and hold the buttons on both Earphones for more than 10 seconds to clear the pairing records.
Operation Functions
Charge the Charging Case
The Charging Case can be charged using a Type C charging cable. The battery
level and charging status can be confirmed by the battery indicator.
Notes: Please charge by connecting to an adapter with an output voltage
(compatible) of 5 V by using a Type C charging cable. *If the output voltage
of the adapter is higher than 5 V, it may cause charging failure or even
damage to the product.
Charge the Earphones
Place the Earphones in the charging case. The Bluetooth connection disconnects and the charging of the Earphones starts.
LED Indicator
After the Earphones are placed in the case:
The case is fully charged: The white light on the case turns on for 4 seconds
and turns off.
Battery level of the case is low:
The white light on the case flashes for 4 seconds and turns off.
Charging the Charging Case:
Charging: The white light on the case flashes.
Fully charged: The white light on the case stays on.
The charging cable is unplugged: The light on the case turns off.
Technical Specifications
Warning
- Do not disassemble, repair or modify the product for any reason, as this may cause fire, electronic breakdown or even completely destroy the product;
- Do not wipe this product with oil or other volatile liquids;
- Do not leave the device in environments where the temperature is too high or too low (above 75 degrees or below minus 40 degrees) for an extended period of time.
- Do not use the device during thunderstorms. Thunderstorms can cause the device to malfunction and increase the risk of electric shocks.
- Do not wear Earphones continuously for long periods of time (more than 6 hours), especially listening at maximum volume;
- Do not wear Earphones when riding or driving. Such behavior is illegal in some countries;
- This product contains a lithium battery. Disassembly, collision, crushing or exposure to fire is prohibited. Do not use swollen batteries. Do not place in high-temperature environments.
Please dispose the battery in accordance with local regulations and do not treat it as household waste.
Environmental protection support
Name and content of hazardous substances in the product
This form is prepared in accordance with the provisions of S1/T11364.
: Indicates that this hazardous substance contained in all of the homogeneous
materials for this part is below the limit requirement in GB/T26572.
: Indicates that this hazardous substance contained in at least one of the
homogeneous materials used for this part is above the limit requirement in
GB/T26572.
For the part marked with “ ” in the table, the hazardous substance cannot be
replaced due to limitations of the global level of technical development.
WEEE
Electrical and electronic equipment, parts and batteries marked with this
symbol must not be disposed of with normal household wastage, it must be
collected and disposed of separately to protect the environment.
Your EB64G retailer will advise you of the correct way of disposal in your
country.
FCC
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue.
Device types EB64G (FCC ID: SRQ-EB64G) has also been tested against this SAR
limit. This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help
CE
Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
IC
This device contains licence-exempt transmitter(s)/ receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
IC Radiation Exposure Statement:
This equipment complies with Canada radiation exposure limits set forth for
uncontrolled environments.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.