LUXPRO LP9UV Ultraviolet Illuminator Light 9-LED User Manual
- June 6, 2024
- LUXPRO
Table of Contents
LP9UV Ultraviolet Illuminator Light 9-LED
3 AAA Batteries
**User Manual
**
Features
Operating Ultraviolet light 385-390 nm
Constructed with aircraft-grade aluminum
9 UV LEDs
Enhanced rubber grip
High-quality wrist lanyard
IPX4 waterproof rating
Batteries included (3 AAA)
Operation Instructions
On/Off: Press and release the button on the tail cap to turn the light on and off.
Battery Replacement
The LPUV uses 3 AAA batteries. To replace the batteries, turn the tail cap
counterclockwise to remove it. Tip the light downward to slide out the battery
case which contains the batteries. Remove the batteries from the case and
insert new batteries according to the (+/-) symbols found on the case. For
best results, we recommend using brand new alkaline batteries that are the
same voltage and brand.
Re-insert the battery case into the flashlight (+) side first with the arrow
on the battery case pointing down.
Re-attach the tail cap by pressing down lightly and turning it clockwise until
tight.
If you know it will be a while between uses, we suggest removing the batteries from the flashlight and storing it in a dry, protected place.
Product Warranty
The LP9UV has a Limited 30-Day Warranty Against Manufacturer’s Defects from
the time of purchase.
For warranty claims please contact us by calling
801-553-8886 or sending an email to
[email protected]
luxpro.com
866.553.8886
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
Documents / Resources
|
LUXPRO LP9UV Ultraviolet Illuminator Light
9-LED
[pdf] User Manual
LP9UV Ultraviolet Illuminator Light 9-LED, LP9UV, Ultraviolet Illuminator
Light 9-LED
---|---