Kungfuking Alarm Clock for Heavy Sleepers User Guide

Specification:

3 USB Ports
2 AC Outlet
Power Rating: 1000-2400W (10A Max)
AC Input: 100-240V 50/60 Hz
USB Output: 5V/Max 2.4A per port
USB Power: 16W (total 5V/3.4A output)

Package Include:

1x LED Electronic Clock
1x Wireless Vibrator
1x Instruction Manual

How To Setting Time

1. Long press the “CLOCK” button to start setting.
2. The number representing “hour” will flash, use the “UP/DOWN” button to adjust it. Pressing the “CLOCK” button again will switch to minutes, use the “U P/DOWN” buttons to adjust it. Once you are done, press the “CLOCK” button again to confirm.
3. Long press” CLOCK” key to adjust “hours” time to 12 then it will skip to (AM or PM)

How To Setting Alarm

1. Short press the “ / ” button to start setting.
2. The “hour” on the alarm will flash, use the “up/down” buttons to adjust it. Pr essing the “ / ” button again will switch to minutes, use the “up/down” buttons to adjust it.
3. Pressing the “ / ” button one more time will switch to set the “Sound & Shake”, press the” up” button to close the “Sound” or “shake, press “+/-” to adjust the volume. Once finished, press the “ / ” button again to save.

Note: There are two alarm clocks, their settings are the same

How To Close The Alarm

If you want to close the alarm, you must press the “ / ” button one time will turn off the alarm. There are a total of 2 adjustable alarms, you need to turn off 2 alarms at the same time.

How to Keep Time Memory

The clock does not keep memory; if power is interrupted (or turns off the clock), the clock returns to default time. To ensure accurate time-keeping during power disconnection, we suggest you put the battery into the clock. 2 * AAA Battery (NOT INCLUDED)

Alarm clock with Snooze Function

When the alarm is sounds, press the “SNOOZE / DIMMER” button; The alarm will pause and enter the snooze mode. When the snooze time is up, the alarm will sound again (interval of 9 minutes). The alarm will automatically turn off after 1 hour of continuous alarm.
Press the ”CLOCK” button to stop the current alarm.

How to Adjust Alarm Clock Screen Brightness

Single press ” SNOOZE / DIMMER ” to adjust the screen brightness: three-level ls of brightness- > two levels of brightness – one level of brightness-off- > one level of brightness- > two levels of brightness -levels of brightness- > cycle

How to Set DST

1. To turn on/off the Day Light Saving Time, please hold the “DST ” button for 2 seconds.
2. When the Daylight Saving Time is activated, the “DST” icon will display on the left in the lower corner.
3. 3.To turn off daylight saving time, you need to manually press and hold the “DST” button for 2 seconds (the”DST” icon will disappear)

About the Wireless Vibrator

The “Vibrator” has three levels that can be adjusted, and you can adjust it as your needs. The wireless control distance is 15 meters, and the connection will be impossible if it exceeds 15 meters. If you want to turn off the vibration, just
Press “ / ” to turn off.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>