ATGAMES HA2811S Legends Gamepad Instruction Manual

: June 6, 2024
: ATGAMES

Table of Contents

Read User Manual Online (PDF format)
Download This Manual (PDF format)

2021 AtGames Interactive
www.atgames.net
PO Box 1691, El Segundo, CA 90245 All rights reserved.
Made in China

INSTRUCTION MANUAL

Parts

Wireless — Legends Arcade Family Device

Press and hold [HOME] and X on the controller for 2 seconds to enter its pairing mode. [LED 3] will blink quickly.
Go to your Legends Arcade Family’s device SETTINGS on the Main Menu and select Wireless Pairing.
Highlight [Legends GamePad) and select Connect. [LED 3] will stay lit when the connection is successful.
The controller will auto-reconnect to your Legends Arcade Family device with the press of [HOME] once it has been paired.

Wireless Connection – Windows/Rndroid

Press and hold [HOME] and [X] on the controller for 2 seconds to enter its pairing mode. [LED 3] will blink quickly.
Go to your Windows/Android device’s Bluetooth settings and pair with [Legends GamePad]. [LED 3] will stay lit when the connection is successful.
The controller will auto-reconnect to your Windows/Android device with the press of [HOME] once it has been paired.

Wired Connection

Press and hold (RM.
Connect the controller to your device via USB cable. (LED 31 will stay lit when the connection is successful.

Battery
STATus
LEO EVOCATOR Low battery mode• LED 4 blinks quickly Battery charging LED 4 blinks slowly Battery fully charged LEO 4 stay lit

Power Saving
The controller will shut down automatically If not used for S minutes.

FCC Statement
This equipment has been tested and found to comply with the Rollo for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one Of more of the following measures:

Reorient or relocate the receiving antenna.
increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radioffV technician for help.

[AUTON
Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Battery Caution

This product contains a non-replaceable battery.
There is a risk of fire and personal injury if the battery is punctured, damaged, or misused.
Do not dismantle, crush, incinerate or short-circuit the battery.
Never expose the battery to extreme temperatures or moisture.
Keep away from flammable materials and direct sunlight.
Only charge using the provided cable.
Recharge using the provided cable.
Adult supervision of the battery, while it is charging, is required.

battery Caution

Allow the battery to cool down to room temperature before charging.
Charge on a non-flammable surface and keep away from flammable products.
Discontinue charging if the battery becomes hot, swells. smokes. or gives off a strong odor. Battery chargers used with the product are to be regularly examined for any damage to the cord44. fill and other parts, and In the event of such damage, they must not be until the damage has been repaired.
Recycle Or dispose Of the battery according to federal, state, and local laws.
Keep these instructions for future reference.

ID Statement
This device complies with Industry Canada license-exempt R55 standardized Operation is spoilage to the following two conditions: (I) This device may not cause interference. and (2)This device must accept any interference. Including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN 1a53 (13yff lAti3(12I. This device meets the exemption from the routine evaluation limits In section 2.5 of RS5 102 and compliance with 855102 RF exposure, users can obtain Canadian information on RF exposure and compliance. This equipment complies with Canada’s radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0mm between the radiator & your body.

Warranty tiro
The manufacturer warrants this product to be free and clear of defects in the materials and workmanship. under normal residential use and conditions, for a period of thirty(30)days from the original invoice date. Shipping and handling fees are to be paid for by the customer. To make a warranty claim. please submit a service request here: support(Patgamesnet.
Standard warranty coverage for the AtGames Arcade Control Panel does not apply to and is considered invalid due to misuse. improper maintenance, self-repair, tampering, or Invasive hardware modifications of any kind, and damages or dysfunction caused by shipping or non-manufacturing related causes.

Nate: Standard warranty services are valid with receipt from an authorized retailer. Purchases through third-party sellers and recede., do not fall under the standard warranty program. For warranty support, please contact the third-party seller or reseller where you purchased the product.

Safety Notice

Do not submerge the device In water or expose it to extreme heat or too strong magnetic fields. Doing so may cause permanent damage to your device.
Always use a dry towel to clean the device.
Transformers are suitable for indoor use only. Transformers and power supplies for toys are not intended to be used as toys, and the use of these products by children shall be under the full supervision of parents.