Shenzhen Bovision Technology BF-A30 Battery Wifi Camera User Guide
- June 6, 2024
- Shenzhen Bovision Technology
Table of Contents
Shenzhen Bovision Technology BF-A30 Battery Wifi Camera
(BATHRY CAM) ORIGINALITY DESIGN SMART – AND BEAUTIFUL
QUICK GUIDE 
What’s in the box
Please consult this checklist for all parts.
Description
Install
Mode Bracket Installation
Connect
Download
Cloud Edge is available for both iOS and Android OS. Search the name
‘CloudEdge’in App Store or Android Market, or scan below QR-Code to download
the App.
Add device
Log in the Cloud Edge, select • Add Device”, and add the smart camera to the
App according to the screen tips(Make the smart camera close to the router
when configuring.
NOTE :lf you need to re-select the WiFi network, please press and hold the “RESET” button for 5 seconds, the device will restart, and the indicator will be flashing red.
FAQ
-
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to the router, and if not, it is recommended to reset the device and add it again. -
Q: Why is it still in the list of devices after reseting?
A: The reset device only resets the network configuration of the camera, but cannot change the configuration on the App, remove the camera, and must be deleted by the App. -
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the device again by the App. -
Q: Why doesn’t the device identify the SD card?
A: It is recommended to plug in SD card after power cut. Confirm whether the SD card is normally available and the format is FAT32. And the TF card can’t be identified when the internet environment is not good. -
Q: Why I can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the relevant reminder function has been opened;Message notification and authority confirmation in the mobile phone system have been opened.
Functions
- Remote wake-up The camera will be in a sleep mode to save power; you can have a preview in App.
- Full-duplex audio You can see and hear the vistor in your App from the camera.
- PIR When the camera detects someone stopping by, it sends an alarm message to your cell phone.
- Low battery alarm When the battery power is lower than your set, the App will send a notification to your mobile phone
- . Record Using SD card or opening the Cloud-Storage Service, to keep recording for every moment.
- Day & Night Powerful night vision means no interruptions, even in complete darkness.
Warning
- The camera with built-in battery cannot be put into fire to prevent the battery from exploding;
- Do not drop the camera on ground and avoid strong impact;
- Avoid keeping in humid, dusty, extremely hot, extremely cold,strong electromagnetic radiation or other places;
- Do not put the camera into water;
- Do not disassemble the product without permission.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance between 20cm of the radiator your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>