Hytra BD30X Digital Potable Radio User Guide

BD30X Digital Potable Radio
User Guide

Product Overview

Product Layout

Programmable Key
For enhanced convenience, you can request your dealer to program SK as a shortcut to a radio feature. Consult your dealer for assignable radio features.

LED Indications

channel during a call. Within such a period, you can press and hold the PIT key and speak.

Basic Operations

Charging the Battery
CAUTION

• Read the Safety Information Booklet before charging.
• Use the approved charger to charge the battery.
• The remaining lithium-ion battery power is limited to 30% pursuant to the new lithium battery shipment regulation approved by International Air Transport Association (IATA).

Before initial use, make sure to charge the battery. To charge the battery, connect the radio to the power adapter, power bank, or PC with the data cable.
The charging indicator shows the charging status. For details, see the following table:

Turning the Radio On or Off
To turn the radio on or off, press the On-Off key.
Adjusting the Volume
To adjust the volume, press the Volume Up or Volume Down key.
Selecting a Zone
A zone is a group of channels within the same operational area. The radio supports up to 3 zones, each of which contains up to 16 channels.
To select a zone, press the preprogrammed Zone Up or Zone Down key.

Selecting a Channel
To select a channel, rotate the Channel Selector knob. If the Channel Notify feature is enabled, the radio automatically announces the current channel upon power-on and channel change.

Call Services

When you are speaking during a call, keep the microphone about 2.5 to 5 cm away from your mouth. This ensures optimal voice quality on the receiving radio.
Call on Digital Channel
You can initiate or receive the following types of calls on a digital channel:

• Private call: a call from an individual user to another individual user.
• Group call: a call from an individual user in a group to all the other members in the group.
• All call (enabled by your dealer): a call from an individual user to all other users on the current channel.

Initiating a Call

• On the home screen, rotate the Channel Selector knob to select the required channel. and then press and hold the PTT key to initiate a call to the contact preset on the channel.
• If the One Touch Call feature is configured by your dealer, press the preprogrammed One Touch Call key, and then press the PTT key to initiate a call to a private or group contact.

Receiving and Responding to a Call
You can listen to an incoming call without any operation. To respond to a private or group call, press and hold the PTT key within the preset lime.
Ending a Call

• A private/group call ends when the call hang time expires.
• An all-call ends when the calling party releases the PIT key.

Call on Analog Channel (Without Signaling)
You can initiate a call to all other users on the current analog channel. The operations are the same as those on the digital channels.
For details on more features and operations, please visit our website at http://www.hytera.com, or scan the QR code to download the User Manual.
http://www.hytera.com/productResources.htm?columnId=416&proId=99417&resourceType=3

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Verification of harmful interference by this equipment to radio or television reception can be determined by turning it off and then on. The user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a different circuit to that of the receiver’s outlet
• Consult the dealer or an experienced radio/TV technician for help.

Operation is subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.

Note: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user% authority to operate the equipment. Compliance with RF Exposure Standards Hytera’s portable radio complies with the following RF energy exposure standards and guidelines:

• the United States Federal Communications Commission, Code of Federal Regulations; 47 CFR § 1.1307, 1.1310 and 2.1093.
• American National Standards Institute (ANSI) / Institute of Electrical and Electronics Engineers (IEEE) C95. 1:2005; Canada RSS102 Issue 5 March 2015.
• Institute of Electrical and Electronics Engineers (IEEE) C95.1:2005 Edition

RF Exposure Compliance and Control Guidelines and Operating Instructions
To control your exposure and ensure compliance with the occupational/controlled environment exposure limits always adhere to the following procedures. Guidelines:

• Do not remove the RF Exposure Label from the device.
• User awareness instructions should accompany the device when transferred to other users.
• Do not use this device if the operational requirements described herein are not met. Operating Instructions:
• Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the Push-To-Talk (PTT) button. To receive calls, release the FIT button. Transmitting 50% of the time, or less, is important because the radio generates measurable RF energy only when transmitting (in terms of measuring for standards compliance).
• Keep the radio unit at least 2.5 cm away from the face. Keeping the radio at the proper distance is important as RF exposure decreases with distance from the antenna. The antenna should be kept away from the face and eyes.
• When worn on the body, always place the radio in a Hytera-approved holder, holster, case, or body harness or by use of the correct clip for this product. The use of non-approved accessories may result in exposure levels that exceed the FCC’s occupational/controlled environmental RF exposure limits.
• The use of non-approved antennas, batteries, and accessories causes the radio to exceed the FCC RF exposure guidelines.
• Contact your local dealer for the product’s optional accessories.

IC Statement

The device has been tested and complies with SAR limits, users can obtain Canadian information on RF exposure and compliance
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
SAR tests are conducted using standard operating positions accepted by the FCC/ISEDC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value.
Before a new model device is available for sale to the public, it must be tested and certified to the FCC/ISEDC that it does not exceed the exposure limit established by the FCC/ISEDC, Tests for each device are performed in positions and locations (worn on the body)as required by the FCC/ISEDC. For face-up, 25mm was used for the test, this equipment should be installed and operated with a minimum distance of 25mm.
For body-worn operation, this model phone has been tested and meets the FCC/ISEDC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of Omm from the body. Non-compliance with the above restrictions may result in a violation of RF exposure guidelines.

is the trademark or registered trademark of Hytera Communications Corporation Limited.
© 2018 Hytera Communications Corporation Limited. All Rights Reserved.
Address: Hytera Tower, Hi-Tech Industrial Park North, 9108# Beihuan Road, Nanshan District, Shenzhen, People’s Republic of China Postcode: 518057 http://www.hytera.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>