SHOKZ OPENRUN PRO S810 Premium Bone Conduction Open-Ear Sport Headphones User Guide

June 6, 2024
SHOKZ

OPENRUN PRO S810 Premium Bone Conduction Open-Ear Sport Headphones
User Guide

ON/OFF

SHOKZ OPENRUN PRO S810 Premium Bone Conduction Open Ear Sport Headphones -
ON OFF

Turn on the headphones
Press and hold the Power/Volume+ Button for 2 seconds until the LED
The indicator flashes blue.
Turn off the headphones
Press and hold the Power/Volume+ Button for 2 seconds until the LED Indicator flashes red.

Pairing

SHOKZ OPENRUN PRO S810 Premium Bone Conduction Open Ear Sport Headphones -
Pairing 1

  1. Start with OpenRun Pro turned off.

  2. Press and hold the Volume+ button for 5 seconds or until the LED Indicator flashes red and blue.
    SHOKZ OPENRUN PRO S810 Premium Bone Conduction Open Ear Sport Headphones -
Pairing 2

  3. Open your device’s Bluetooth settings and select ”
    OpenRun Pro by Shokz.” Audrey will say “connected.”

Multifunction Button

SHOKZ OPENRUN PRO S810 Premium Bone Conduction Open Ear Sport Headphones -
Multifunction Button

Play/pause music
Click once
Next song
Double-click while music is playing
Previous song
Triple-click while music is playing
Answer call
Click once
End call
Click once

Download the Shokz app

Shokz

SHOKZ OPENRUN PRO S810 Premium Bone Conduction Open Ear Sport Headphones -
Play store

Manage multipoint pairing, upgrade firmware, change EQ modes, and more!
Download the Shokz App to easily control headphone settings.
*Only for limited regions, go to userguide.shokz.net/openrunpro for more information

Please refer to the following for more details

Storage and Maintenance

  • Store the headphones in a cool and dry place. The working temperature should be 0~45℃(32~113°F). Working in a cold/hot environment or a highly humid area or an
    extremely low air pressure may reduce the battery life.

  • Keep the product away from heat sources, direct sunlight, combustible gas or other liquids.

  • Keeping the charging port dry before connecting to the charger will reduce the risk.

  • The headphones are water-resistant, but are NOT waterproof. Please DO NOT submerse the headphones in water.

  • Clean the headphones with a soft dry cloth.

  • Do not charge right after exercising, in case there’s sweat inside the charging port, which could lead to circuit burning while charging.

  • After storage for a long period, please charge the headphones before using them again.

Note
Design and specifications are subject to change without notice. For the most up-to-date product information, please visit www.shokz.com.

Manufacturer Declarations
Warranty
AfterShokz LLC gives a warranty of 24 months on this product. For the current warranty conditions, please visit our website at www.shokz.com or contact your Shokz partner. Before putting the product into operation, please observe the respective country- specific regulations.

Hearing Loss
Listening with headphones at a high volume may affect your hearing and the audio will be distorted.

FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without testing of specific absorption rate (SAR).

Responsible party (contact for FCC matters only):
AfterShokz LLC.
3200 Gracie Kiltz Lane, Suite 400 Austin, TX 78758
USA
www.shokz.com

Industry Canada
This device complies with Industry Canada licence-exempt RSS standard(s): Operation is subject to the following two conditions: (1)this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

CE Declaration of Conformity
Shokz Holding Limited hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU Directive requirements. The complete declaration of conformity can be found at: https://shokz.com/pages/policies. Shokz’s EU representative is Aftershokz BV, Schipholweg 103, 2316XC Leiden, Netherlands.

Frequency Range Output Power
2402-2480MHz 10dBm(EIRP)

UK Declaration of Conformity
Shokz Holding Limited hereby declares that this product is in compliance with the essential requirements and all other applicable United Kingdom regulations. The complete declaration of conformity can be found at: https://shokz.com/pages/policies. Shokz’s authorized representative in the UK is Pinpoint Consumer Electronics Ltd., Unit 35, Meridian House, Road One, Winsford Industrial Estate, Winsford, Cheshire CW7 3QG.

WEEE Declaration of Conformity
This WEEE logo means that this product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling help protect natural resources, human health, and the environment. For more information on the disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
Australia/New Zealand

Warning: To avoid the risk of explosion, fire, or leakage of toxic chemicals, please do not disassemble the product and replace deform or mutilate the battery.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals