MPOW BH476A M13 True Wireless Earbuds User Manual
- June 6, 2024
- MPow
Table of Contents
MPOW M13
TRUEIAIRELESSEARBUD8
MODE L: BH476A
USER MANUAL
Note: remove the insulating film on both earbuds when using for the first time.
PACKING LIST
DIAGRAM
POWER ON
- The earphones automatically turn on(with white LED light flashing) and start pairing when you open the charging case.
- In the shutdown status and when the earphones are not in the charging case, simultaneously press and hold the MFB of both earbuds for 2 seconds to power on ( with the white LED light flashing).
POWER OFF
- Put the earphones back in the charging case and close the case to turn them off.
- If the earphones are not in the charging case, just press and hold the MFB of both earbuds for 5 seconds to power them off. (Mode 2 cannot be conducted during must playing or calling.)
PAIRING
- Open the charging case, they will automatically enter the pairing mode in which the LED light flashes white and red alternately and then select “Mpow M13”.
Note: The earbud will reconnect to the paired device by priority. If you want to pair to the second smartphone. please disconnect Bluetooth on the paired smartphone.
MUSIC
INCOMING CALL
MUSIC & INCOMING CALL & Siri
- Volume Up / Down Volume + : press and hold the MFB button of the Right earbud to turn up the volume increasingly. Volume – : press and hold the MFB button of Left earbud to turn down the volume decreasingly.
- Next / Previous Track Next Track double-tap the MFB of Right earbud. Previous Track double-tap the MFB of the Left earbud.
- Play / Pause Tap the MFB of either earbud once.
- Answer / Hang Up Double-tap the MFB of either earbud.
- Reject Press and hold the MFB of either earbud for 2 seconds.
- Activate Siri Triple-tap the MFB of either earbud.
RESET
- Take both earbuds from the charging case.
- Turn off both earbuds by keeping pressing either earbud for 5 seconds. The red LED on the earbud stays for 1 second and then goes out which means that you successfully turn off the earbuds. Note: when you take both earbuds from the charging case, you only need to turn off either earbud. and the other one will turn off automatically.
- Clear the paired information by simultaneously keeping pressing both earbuds for 10 seconds. Firstly, the LED turns to white and stays for 1 second, and then the white LED flashes quickly. Finally. the LED flashes white and red alternately 3 times and then goes out which means that the resetting is successful. After successful resetting. the earbuds will turn off automatically.
CHARGING
CORRECT DISPOSAL OF THIS PRODUCT
( Waste Electrical& Electronic Equipment )
**This Marking showed on the product or its literature. indicate that it
should not be disposed of with other household wastes at the end of its
working life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources. Household
user should contact either the retailer where they purchased this product. or
their local government office. for details of where and how they can take this
item for environmentally safe recycling. Business users should contact their
supplier and check the terms and conditions of the purchase contract. This
product should not be mixed with other commercial wastes for disposal.
FCC STATEMENT
Ary Changes or modifications not expressly approved by the party responsible
for compliance could wici the users authority to operate the equipment This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1 ) This device may not cause harmful interference.
and (2) this device must accept any interference received, including
interference that may cause undesired operation
FCC Radiation Exposure Statement**
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment
www.xmpow.com
support@Nmpaw.com
MPOW TECHNOLOGY CO., LTD Copyright
© MPOW Inc. All rights reserved.