Picture COVID-19 Kit Instructions Trifold (1/2) Instructions
- June 6, 2024
- Picture
Table of Contents
Picture
By Fulgent Genetics
Picture COVID-19
Kit Instructions
Trifold (2/2)
OUTSIDE TRIFOLD
To ensure the accuracy of your results, kit activation, sample collection, and return shipping should all occur within the same day. Our lab may be unable to accept late samples.
Keep in mind
Do activate, collect, or ship your sample on a Saturday or Sunday.
Find your nearest FedEx dropbox by visiting fedex.com/dropbox to check that
you’re able to ship your sample before the last Express pickup of the day.
INSIDE TRIFOLD
Step 1 Activate your kit
YOU MUST ACTIVATE YOUR KIT ONLINE BEFORE SUBMITTING YOUR SAMPLE
Your activation time will be used as an indicator of your sample collection
time amitmikin
| |
---|---|---
1. When ready to start, activate your kit online at
picturegenetics.com/activate| 2. Enter the code that is located on the front
cover of your instructions trifold.| 3. Wash your hands before collecting
your sample.
Step 2 Collect your sample
| 1. Open the stabilizing solution tube and place it within the opening on
your kit insert card This wilt ensure it’s ready to go for when you need to
use it.
---|---
| 2. Gently insert the swab into the nostril until the swab contacts what
feels like the top of your nasal cavity. This should NOT lead to discomfort –
do not push the swab further than one inch into the nostril. Rotate the swab
against your nasal wall a few times using firm but gentle pressure. Repeat in
another nostril.
| 3. Place the tip of the swab (the side that you used) into the stabilizing
solution tube, so that the swab is immersed in the liquid. Do not drink or
touch the solution; wash hands if solution comes in contact with the skin.
| 4. Seal the plastic tube using the same cap, ensuring that the swab is
upright within the tube and that there is no leakage. Do not over-tighten the
cap, as this may cause damage or crack.
DO NOT Rinse your nasal cavity before collecting your sample.
PLEASE
- Collect your sample after activating your kit
- Wash your hands before and after collecting your sample
Need a video tutorial?
Please visit
picturegenetics.com/nasalswab for more
information.
Questions?
Please contact Picture with any issues:
hello@picturegenetics.com
Step3 Pack up your sample
|
---|---
1. Thoroughly wash and dry hands after completing sample collection.| 2. Put
the sealed tube into the orange-and-clear specimen bag containing the
absorbent sheet and seat the bag.
|
3. Put bagged sample back inside the box and sea, with the sticker provided.|
4. Place your box into the provided FedEx envelope with a pre-affixed
shipping Label, and seal the envelope.
5. Promptly ship your sample back via FedEx. See reverse side for important
information on shipping.
Please hold on to this trifold for safekeeping
For questions regarding your order, email
hello@picturegenetics.com with your name,
order ID, and kit activation code.
If you have any questions, we’re here to help!
Email us at helloapicturegenetics.com
FDA Authorized
This product has not been FDA cleared or approved, but has been authorized
for emergency use by FDA under a EUA for use by authorized laboratories. This
product has been authorized only for the detection of nucleic acid from SARS-
CoV-2. not for any other viruses or pathogens. The emergency use of this
product is only authorized for the duration of the declaration that
circumstances exist justifying the authorization of emergency use of in vitro
diagnostics for the detection and/or diagnosis of COVID-19 under Section
564(b)(1) of the Federal Food, Drug, and Cosmetic Act, 21 U.S.C. S
360bbb-3(b)(1), unless the declaration is terminated or authorization is
revoked sooner.
For use under Emergency Use Authorization PX Only IVD
Thank you for taking your first step in being safe with us!
This is your activation code
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>