FULLJA JT101M Digital Photo Frame User Manual

: June 6, 2024
: FULLJA

FULLJA JT101M Digital Photo Frame

FULLJA-JT101M-Digital-Photo-Frame-PRODUCT

FULLJA JT101M Digital Photo Frame

Cautions

Precautions and maintenance

For indoor use only.
To avoid the risk of fire or electric shock, do not expose the unit to moisture or condensation.
To avoid overheating, do not block the ventilation holes on the back of the Digital Photo Frame.
Keep the Digital Photo Frame out of direct sunlight.
Always use the eject buttons on the memory storage card slots to remove the storage cards.
Do not dismantle the Digital Photo Frame. There is a risk of electric shock and there are no user-serviceable parts inside.
Dismantling the Digital Photo Frame will void your warranty.

Cleaning the LCD Screen

Treat the screen carefully. Because the screen of the Digital Photo Frame is made of glass it would easily be broken or scratched.
If fingerprints or dust accumulate on the LCD screen, we recommend using a soft, non-abrasive cloth such as a camera lens cloth to clean the LCD screen.
Moisten the cleaning cloth with the cleaning solution and apply the cloth to the screen.

WARNING:
Please power off the unit before inserting or removing a card or USB device. Failure to do so may cause damage to the card/USB and the unit.
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

Introduction:

Thank you for your purchase of the Digital Photo Frame. It is designed to allow a quick and easy view of photos taken from your digital camera, mobile phone, or memory storage card.
Please read this User Manual carefully to learn the correct way to use the Digital Photo Frame.

Features:

9″(4:3) 1024×768 Pixels IPS Panel + Touch Screen
Android System with WIFI function Sharing Photos & Short video via APP/Email/PC Manager
8GB Memory+ Weather Station+Stereo Speaker
Our Own R&D Software&Phone APP Supported by World Famous Cloud System
10GB Online Cloud Storage
Support FHD 1080P Video Playback for Advertising
Newest Unique Design

Packaging Check List:

1. Digital photo frame
2. AC/DC adapter
3. USB Cable
4. User Manual| 1 piece
1 piece
1 piece
1 piece
---|---

Product Diagram

Bottom of the frame

Reset Button
TF Card Slot
DC IN
Micro USB

Getting Started

Put the digital photo frame in a flat position steadily, then plug one end of the AC adapter into a standard 110-240V AC electrical outlet and the other end into the DC IN slot at the bottom of the frame.
Slowly remove the protective film covering on the Screen.

Email &Cloud Photo APP Operating Instruction

Connect Wi-Fi
Cloud frame will search for nearby Wi-Fi networks and show the names of those it finds. If it finds a network that was connected previously, it will connect automatically.
If not: Tap your Network and use the keyboard on the screen to input the password, then tap [Connect] to connect to Wi-Fi. Tips: Check [Show password] which is under the password to ensure the password you inputted is right.

Connect your frame to WI-FI
Cloud frame will scan for available Wi-Fi networks and displays the names of those it finds. If it finds a network that you connected to previously, it will connect to it automatically.
If not: Tap the Network you want to connect to. Use the keyboard to enter the Password. And check [Show password] to show the password you entered. Tap [Connect] to connect Wi-Fi.

Download photo APP

Step 1: For Android: Search [VPhoto] APP in Google Play and download the APP For IOS:
Search [VPhoto] in iTunes Store and download the APP
Step 2: Log in Your Account in the APP
1. Open VPhoto APP, select Sign Up and fill in all the required information.
Step 3: Bind Your Frame

Please confirm you have signed in VPhoto APP.
Tap the “Next Step” on the top right to add a new device to the APP.(or tap the icon on the top left, and then choose “Add Photo Frame”)
Tap “Setting → My Frame ”on your digital frame to find the Connection code.
Enter the frame Connection code or scan the QR code. After sending your bind request on [ VPhoto] APP, you will receive a message “*** has bound your device” on your digital frame.
Note： Please connect to the Wi-Fi network first to load it and click [ ] to refresh code to the newest.

Note:

Connection Code is a 9-digit series number that can be found in your frame, device main interface→ Settings →My frame.
The Connection code and QR code will refresh every 12 hours.

Link to Email, Cloud Frame APP

Email
Way1: By Pressing [+] in [My Frame], then add an email address

You could always manage all the users who is bound to your frame here.
Way2:
By email to the email address specified in [My Frame], with the subject: bd Connection Code ( For Example bd1234576789), and 123456789’ is an example here, please use the real connection code instead.
Check if your email has been added to the user list of your photo frame. If so, send the picture and video as an attachment via email to the email address specified in [My Frame], and your photo frame will receive it.

VPhoto APP

How to download APP
For Android: Search [VPhoto] in Google Play and download the APP For IOS: Search [VPhoto] in iTunes Store and download the APP How to bind cloud frame

How to post pictures, videos to cloud frame.

Open the photo APP, Tap [ Next Step] on the top right. (or tap the icon on the top left, and then choose [Add Photo Frame]).
Enter the Connection Code or scan the QR Code.
You can find the Connection Code and QR code in [Setting>My Frame]. Then tap [ Confirm]. Once the binding process is completed, you will see a message “*** has bound your device” on your digital frame.

Enter the VPhoto APP. Choose the picture or video you want to post. Tap [Next Step] on the top right. Choose a device then tap[ ] to send. A pop-up message [Successful] will show on a smart device. You can tap [ Continue to send] to send other photos if you want.

General Operating Instruction

After turning on the cloud frame, it will show the start-up animation. Then enter the main menu interface.

Pictures

Tap [Picture] on main menu to access to picture interface.
Choose pictures from internal memory, memory card, USB driver, cloud server, and favorite. Then tap the picture to start the slideshow picture.
Note: If you want to slideshow with background music. You need to choose the music you want to play in [Music],and tap [|| ] to pause. Then back to [Picture] to slideshow picture, it will play the background music.
If you want to turn off the background music, please tap the slideshow picture and then tap the setting icon, you can see the menu with the “Background Music” option, you can tap to choose turn on/ off the background music.
Copy and delete picture Find the picture in Internal Storage, SD Card, USB, or Favorites, Tap the [┇] on the top right. Then choose the picture you want to copy or delete. Or tap the[ ] to select all. Tap the icon delete to delete the picture. Then tap [OK] to confirm.

While playing pictures from internal memory， tap [ ] to add this picture to favorite, tap [ ] to rotate this picture at 90 degrees,[ ] to back to the previous interface.
Note： Cloud frame doesn’t support adding pictures to favorite from memory card and USB driver.
Tap [Music] on main menu to access to music interface.
Choose music from internal memory, memory card, USB driver.
Then tap the music to start playing music.

Find the music in Internal Storage, SD Card, USB, or Favorites, Tap the Music for about 2 seconds. Or tap the [ ]to select all. Then check the music you want to copy or delete. Tap the [ ] to copy the music from a memory card or USB driver to internal memory or copy the picture from internal memory to a memory card or USB driver. Tap the icon delete to delete the music. Then tap [OK] to confirm. Tap [Video] on main menu to access to video interface. Choose a video from internal memory, memory card, USB driver, cloud server. Then tap the video to start displaying the video.
Find the video in Internal Storage, SD Card, USB, or Favorites, Tap the video for about 2 seconds. Or tap the [ ]to select all. Then check the music you want to copy or delete. Tap the [ ] to copy the video from memory card or USB driver to internal memory or copy the video from internal memory to memory card or USB driver. Tap the icon delete to delete the video. Then tap [OK] to confirm.

Videos

Clock

Tap [Clock] on main menu to access to clock interface. Double-tap the clock and you can choose different clock skins.

Calendar

Tap [Calendar] on the main menu to access the calendar.

Alarm

Tap [Alarm] on main menu to access to alarm interface. Tap [Add] to add a new alarm and tap [Edit] to edit or delete the alarm.

Weather

Tap [Weather] on the main menu to access to weather interface with the weather of three days. Tap [℃] or [℉] to switch temperature format.

Tap [ ] you can switch the city. Tap [+] ,Enter city tap tap [ ] name then to search city.

Settings

My Frame

You can check cloud Connection code number and QR Code in [My Frame] and manage users that are bound to this cloud frame.
In [Album Settings], you can adjust brightness and volume.
Also you can set [Touch Sounds], [Suspended ball], [Language], [ Slideshow], [Slideshow Mode], [Description], [Date And Time], [Sleep] and [Notification sound]Note: Turn on [Auto on/off] in [Sleeping]. And set [Auto on time], [Auto off time] and [Repeat]. Then cloud frame will auto power on or power off.

Wi-Fi Setting

Turn on or turn off the Wi-Fi connection and check the available Wi-Fi network.

Factory data reset

In [Factory data reset], You can Reset the device.

Help

In [Help] you can learn how to use the device.

About

In [About] you can check the firmware version, frame ID， memory space, and other information.

Version Upgrade
If the new version was launched, tap [Version] and you will see a pop-up message [Find new version].
Then tap [Download] to download the new version of the cloud photo frame APP.
After the download process is completed, tap [Install] to install a new version of the cloud photo frame
APP and tap [Cancel] to cancel this process. After the new version of the cloud photo frame APP was installed. Tap [Done] or [Open], then the photo will return to the main menu interface.

Suspended Ball

Turn on the suspended ball in [System settings>Album Setting>Suspended Ball ]. Then suspended ball will appear on the screen. Tap [ ] access to the previous page. Tap [ ] access to main menu. Tap on [ ] to increase volume. Tap on [ ] to decrease volume. Tap on [ ] to power off the device.

Technical Specifications

Adapter: Input AC 100-240V 50/60HZ Output DC 5V/2A
Picture File Format: JPEG/BMP /GIF/TIF/PNG.
Audio File Format: Mp3 / WMA / OGG / APE / FLAC / WAV.
Video/Movie File Format: MPEG1/2, MOV, MPEG4,, AVI, M-JPEG, H.263, H.264.
Memory Card Slot: TF Card Slot（Max. 32GB）
Built-in Memory: 8GB
USB Card Slot: Micro USB
Screen Parameter:
Screen Size: 9 inches
IPS Resolution : 1024*768 pixels
Aspect Ratio: 4:3
Brightness: 200-300 cd/m2
Contrast: 500:1

Troubleshooting Guide

If you come across when using the photo frame on problems, consult the suggested solutions below, and the corresponding sections of this manual. If you need additional assistance, please contact technical support.

No power:
Please check whether the AC-Adaptor is inserted correctly.
Cannot read the Memory Card or USB-Device:
Please confirm there are supported files on your memory card or USB device. Empty devices cannot be read.
Cannot play the file:
Please confirm if the file format is compatible with the player.
Display too bright or too dark:
Please adjust the brightness in the setup menu.
No sound
Please check whether the volume is correct and the player is not in Mute mode.
No files after sharing video or picture to a cloud server
Please check whether the upload process is completed or not.

Contact Us

If you have any questions after reading the user manual. Please kindly contact us via below. We will give you the best solution within 24 hours. Email: service@comesourcing.com

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.

Shenzhen Good Sourcing E-commerce Co., LTD.

Copyright© 2021 Shenzhen Good Sourcing E-commerce Co., LTD. All right reserved. Reproduction in whole or in part without permission is prohibited. All other trademarks are the property of their respective owners.

DOWNLOAD RESOURCES

FULLJA JT101M Digital Photo Frame [pdf] User Manual JT101M, 2AZ5K-JT101M, 2AZ5KJT101M, JT101M, Digital Photo Frame
Read more: https://manuals.plus/fullja/jt101m-digital-photo-frame-manual#ixzz7jhVjiVHx

FAQ’S

How can I play videos in Fullscreen Media Player?

You can play videos in Fullscreen Media Player by copying them into a video folder under “My Pictures” or “My Documents” folder on your hard drive, and then connecting it with the Digital Photo Frame via a USB cable; or by connecting it with an external display device with HDMI input port via HDMI cable (not included). AVI is recommended as video format for playing videos in Fullscreen Media Player because it is supported by most video players, while other formats may not be supported depending on video players used for playing videos. If you want to play videos with subtitles, please convert them into SRT format before copying them into video folder under “My Pictures” or “My Documents” folder on hard drive, otherwise they will not be played back properly in Fullscreen Media Player due to compatibility issues between different subtitle formats and different video players used for playing videos.

How can I play videos recorded by my digital camera?

You need to copy those videos into a video folder under “My Pictures” or “My Documents” folder on hard drive firstly before connecting it with an external display device with HDMI input port via HDMI cable (not included). Then you can play those videos in Fullscreen Media Player by clicking “My Pictures” or “My Documents” folder icon in Fullscreen Media Player’s interface window after connecting it with an external display device with HDMI input port via HDMI cable (not included). AVI is

Can you send pictures to a digital frame without WIFI?

Best digital picture frame that doesn’t need Wi-Fi
You display photos or videos on the frame using an USB stick or MicroSD card; there is no built-in storage, and you can’t upload photos via email or online.

How do I reset my digital photo frame?

Turn on the digital photo frame.
Press the MENU button.
Press the up arrow or down arrow to select Various settings.
Press the ENTER button.
Press the up arrow or down arrow to select Reset.
Press the ENTER button.

Can I delete photos from digital photo frame?

While the photo is being displayed on the screen during a slideshow, press the menu button on the remote control or the onboard controls. On the popup menu, scroll down to “Delete Picture” and press “ok”. Select “OK” and click it to delete the photo from your frame’s storage.

How do you send pictures to a digital frame?

Load pictures by USB/SD card
Make sure the picture formats and the USB/SD card are compatible with your frame. Insert the USB/SD card into the frame’s relevant port and wait for the popup. Select “Copy the whole USB device to internal memory” to copy everything across to your frame.

How can I play videos in Fullscreen Media Player?

You can play videos in Fullscreen Media Player by copying them into a video folder under “My Pictures” or “My Documents” folder on your hard drive, and then connecting it with the Digital Photo Frame via a USB cable; or by connecting it with an external display device with HDMI input port via HDMI cable (not included). AVI is recommended as video format for playing videos in Fullscreen Media Player because it is supported by most video players, while other formats may not be supported depending on video players used for playing videos. If you want to play videos with subtitles, please convert them into SRT format before copying them into video folder under “My Pictures” or “My Documents” folder on hard drive, otherwise they will not be played back properly in Fullscreen Media Player due to compatibility issues between different subtitle formats and different video players used for playing videos.

How much data does a digital picture frame use?

On average, a frame will use approximately 50MB download data per day (this is a generous average, taking into account approximately 20 photos which are 2MB each + overhead). Occasionally we send out system updates, which can consume an additional 50-350MB, so in total the usage could total a few GB a month.

How do you unpair a frame?

Go to “Frames” and select the frame that you would like to unpair from your account. Scroll down to Playlist Settings and to the lower right side, click ‘Unpair this Frame. ‘ Enter the same password you used in your Nixplay Account, then click “Yes”.

Do all digital picture frames need to be plugged in?

Some digital picture frames have to be plugged into an AC outlet, while others can be AC-powered, but also have a built-in rechargeable battery. The rechargeable units will work anywhere, even if there’s no outlet nearby.

Why is my digital photo frame not connecting to WiFi?

If your WiFi is visible, but the frame won’t connect to it at all, it is usually an indication that something is wrong with either the password or the encryption of the WiFi.

What are the three elements of an image?

The three variables that matter the most in photography are simple: light, subject, and composition.