ACQUA DI PARMA 62216 Smart Home Diffuser User Manual
- June 6, 2024
- ACQUA DI PARMA
Table of Contents
ACQUA DI PARMA 62216 Smart Home Diffuser
HATBOX CONTENT OVERVIEW
ASSEMBLY OVERVIEW
Contents of the hotbox:
- Bose ond chimney (1) (2)
- Leather cover (3)
- 3 frogronce refills (4)
- USB coble ond power odopter(5 8, 5A)
- Instructions manuol (6)
BUTTONS/DESCRIPTIONS
RECAP ON OFF BUTTON
Segment Y to show if the device is powered with cable AND SHOWS WHEN DEVICE IS
ON
Segment Z to show battery status
Segment X to show connectivity status : off = not switched on, blinking =
connecting, solid = connected
ON OFF BUTTON ACTIVITY
POWER CONNECTION
The yellow LED light (Y) in the bottom of the ON OFF button (B) is turned
on when the device is powered with cable.
If cable is connected and device is OFF led light is FIXED
If cable is connected and device is ON led light is BLINKING (to define with
exalia blink frequency)
If cable is NOT connected and device is ON led light is BLINKING (to define
with exalia blink frequency)
If cable is NOT connected and device is OFF led light is OFF
BATTERY
The green LED light (Z) in the top right of the button is blinking when the battery is charging, and is turned on when the battery is charged. When the battery is discharged the light is turned off.
WIFI CONNECTION
The yellow LED light in the top left (X) is blinking while the smart
diffuser is trying to connect to the platform. This light will turn on when
configuration is finished and the connection is achieved . In case of OFF line
use when button On is pressed, the upper LED light (X) starts blinking to find
wifi and then switches off – has no light
RESTORE FACTORY SETTINGS
You can reset your smart diffuser by restoring the factory settings by pushing on the 3 buttons at the same time during 10 seconds.
Then the yellow LED light in the upper part of the ON button (X) blinks
again.
OFF LINE MANAGEMENT
FRAGRANCE CHOICE
To select the desired fragrance, press the appropriate button (C):
once to select the fragrance in slot 1,
twice to select the fragrance in slot 2,
three times to select the fragrance in slot 3.
The first, second or third LEDs will turn on each in correspondence to the fragrances in succession.
When the fragrance in the refill is finished, the corresponding segment
blinks and the scent is no longer dispensed.
INTENSITY CHOICE
To select the intensity of the fragrance, press the dedicated button
(D):
once to select low fragrance diffusing intensity,
twice for medium diffusing,
three times for high intensity diffusion of the chosen fragrance.
The first, the first and the second or all LEDs will turn on respectively in correspondence to the low, medium and high fragrance levels selected.
In this use mode, the device will automatically turn off after an hour, unless it is stopped first by the user by pressing the OFF button (B).
Every time user has finished with one fragrance or the device is switched off
and back switched on, fragrance selection must be done from scratch.
FRAGRANCE AND INTENSITY LIGHT FUNCTIONINIG
Fragrance choice and fragrance intensity leds will be light and have same behaviuors also when selection is done through app or we platform
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>