hama 00 118113 TV Wall Bracket Instruction Manual
- June 4, 2024
- Hama
Table of Contents
- Required tools
- Installation kit
- Operating instruction
- Explanation of Warning Symbols and Notes
- Package Contents
- **Safety Notes
- Intended use and specifications
- **Installation requirements and installation
- **Setting and maintenance
- Warranty Disclaimer
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
TV Wall Bracket
00 118113
Operating Instructions
Required tools
Installation kit
| (A1) 8×60 (x3)| | (E1) M4x12 (x4)
---|---|---|---
| (A2) Ø10×50 (x3)| | (E2) M4x20 (x4)
| (E3) M4x45 (x4)
| (A3) M8 (x3)| | (F1) M6x12 (x2)
| (B1) M6 (x4)| | (F2) M6 (x2)
| (B2) Ø8×10 (x4)| |
Operating instruction
Thank you for choosing the Hama product. Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.
Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention
to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
Package Contents
- TV wall bracket
- Wall plate cover (2x)
- Cable manager (1x)
- Installation kit (see contents, Fig. 1)
- These operating instructions
Note
Please check that the installation kit is complete before installing the
bracket and ensure that none of the parts are faulty or damaged.
**Safety Notes
**
Warning
-
Given the multitude of terminal devices and wall structures available on the market, the supplied mounting kit is unable to cover every option.
-
It occasionally happens that the screws for attaching the terminal device to the wall bracket are too long.
-
Please note that the supplied wall plugs are for use with a concrete brick and solid brick walls only.
-
Read the operating instructions for your terminal device before attempting to mount it. The instructions provide information about the type and measurements of suitable fastening materials.
-
If the supplied mounting kit does not contain suitable fastening materials for mounting the terminal device, purchase these from a specialized dealer.
-
If the wall on which the bracket is to be mounted is made of different material types and construction types to those specified, purchase suitable mounting materials from
specialized dealer. -
Never apply force during mounting. This can damage your end device or wall bracket.
-
If in doubt, have this product mounted by a qualified technician -do not attempt to mount it yourself!
-
Do not mount the product above locations where persons might linger.
-
Once you have mounted the product and the attached load, check that they are sufficiently secure and safe to use.
-
You should repeat this check at regular intervals (at least every three months).
-
When doing so, ensure that the product does not exceed its maximum permitted carrying capacity and that no load exceeding the maximum permitted dimensions is
attached. -
Make sure that the product is loaded symmetrically.
-
During adjustment, ensure that the product is loaded symmetrically and that the maximum permitted carrying capacity is not exceeded.
-
Maintain the necessary safety clearance around the attached load (depending on the model).
-
In the event of damage to the product, remove the attached load and stop using the product.
Intended use and specifications
- The bracket is used for wall mounting flat panel displays for non-commercial, private household use.
- The bracket is only intended for use within buildings.
- Use the bracket only for the intended purpose.
Maximum load bearing capacity: | 15 kg |
---|---|
Screen size: | 25.0 -66.0 cm (US: 10″ -26″) |
Depth: | 5.6 -22.2 cm |
Angle: | -12°/+5° (depends on the device) |
Pivoting range: | up to 180° on 2joints (depends on the device) |
Wall mounting plate dimensions: | 6.6 x16.5 cm |
Mounting holes: | according to the VESA standard until 100×100 |
**Installation requirements and installation
**
Note
• Only mount the TV wall bracket with the help of a second person. Get the
support and help you need.
• Different end devices have different options for connecting cables and other
devices. Before installation, ensure that the necessary connections will still
be accessible
after installation.
• The same mounting kit is included with all of our TV wall brackets.
Depending on the product and mounting type, you may not need to use the entire
mounting kit. Unneeded screws and other small parts may be left over, even if
the wall bracket is properly mounted. Keep these leftover parts with the
operating instructions in a safe place, just in case you might need them later
on (e.g. should you move, sell the product, mount the wall bracket in a
different location, buy a new TV, etc).
Warning
• This product is suitable for wall mounting only.
• Before installing the bracket, ensure that the wall on which the television
is to be mounted is suitable for the weight, and make sure that no electrical
wires, water, gas, or other lines are located at the installation location.
• Please note that the provided wall anchors are only approved for concrete
and solid brick walls.
• Observe the other warnings and safety instructions.
• Proceed step-for-step in accordance with the illustrated installation
instructions (Fig. 1ff.).
• During installation, the hinges aretobeadjusted so that the TV can be moved
side to side.
Note
• Given the multitude of terminal devices available on the market, we cannot
describe all possible mounting options here.
• Please ensure that the bracket lays flat and evenly on the back of the
television.
• Use the enclosed spacer to even out any unevenness on the back of the
television.
• Ensure that all screws have the proper length and can be mounted until they
are hand-tight (see Fig. 2).
**Setting and maintenance
**
Note
Only adjust the TV wall bracket with the help of a second person. Get the
support and help you need.
• To adjust the inclination, loosen the side mounting screws slightly, set the
desired angle, and retighten the screws securely.
• Check that the bracket is secure and safe to use at regular intervals (at
least every three months). Only use water or standard household cleaners for
cleaning .
Warranty Disclaimer
Hama GmbH &CoKG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or failure to observe the operating instructions and/or safety notes.
Terms of warranty
HAMA GmbH &CoKGgrants you an extended manufacturer’s warranty for this product
that covers the freedom from defects, usability, workmanship, and durability
of the materials used for the specified period of 10 years. Compatibility of
the product with future standards for further developed hardware is also
excluded. At the discretion of Hama GmbH &CoKG, valid warranty claims in this
period will be resolved at no cost either by repair or replacement. The
warranty period begins on the date of purchase of this product and is valid
throughout the EU. The warranty you are entitled to is in addition to your
statutory rights and does not affect them. The warranty does not cover damage
caused by improper use, normal wear, and tear, exposure to chemicals, force
majeure, or modifications or repairs performed by yourself or third parties.
Furthermore, this warranty does not cover accessories that are not included
with the product as standard(promotional parts). In the event of a warranty
claim please write to us, enclosing proof of purchase, at Hama GmbH &CoKG,
Dresdner Str. 9, 86653 Monheim, Germany. You are also free to contact us at
www.hama.de or by telephone at +49 (0)9091/502-0.
Hama GmbH &CoKG
86652 Monheim /Germany
Service &Support
www.hama.com
+49 9091 502-0
All listed brands are trademarks of the corresponding companies.
Errors and omissions excepted, and subject to technical changes.
Our general terms of delivery and payment are applied.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>