System Loco LT-EP-4 LocoTag User Manual

System Loco LT-EP-4 LocoTag

LocoTag – User Manual (English – North America, EMEA, APAC)

a few seconds ago · Updated

LocoTags have been designed to make finding people or assets easy. They broadcast their presence to nearby LocoTrack devices and other sensor information if available.

Product Variants & Functionality

The LocoTag family of 5 variants are based on the root E4BL tag. The LocoTags are all built on the same hardware and have the same form factor. The differences between the variants are as follows:

The variants with the ‘E’ prefix have a temperature and humidity sensor fitted that can be NIST calibrated.
The variants with the ‘P’ suffix broadcast less frequently and so have a longer battery life.
The dimensions are 57x32x11 mm
The datasheet is appended to the bottom of the article.

Key Features

• Small, covert and easy to install
• Long battery life of up to 5 years
• Room level, near-real-time localisation
• Reports every 5 or 10 seconds
• Logs every 15 minutes Up to 80m range
• Uses proprietary protocol over 2.4 GHz
• Sensor options include temperature and humidity

General Device Operation

The LocoTag is designed to be very simple to install and use. As such the tags are configurable at build time only.

Simply snap off the tab, peel the back off to reveal the sticky pad and fix in place

Product Label

The product label can be found printed on the LocoTag label – affixed to the front of the device. The label contains the following information:

• Device ID ­- The device ID is unique to each device and is used to locate and monitor the device via the LocoAware website. The barcode is an encoded version of the Device ID that can be scanned.
• FCC ID ­ The FCC ID for the LocoTag
• Model/Variant ­ e.g. LocoTag E4BL
• Regulatory Symbols and IDs, FCC, IC, CE, Giteki and do not dispose symbol.

The product label format is shown here (note that for certain territories a different label may be used)

Packaging Leaflet (placed inside every shipped box of LocoTags)

The label on the LocoTag only measures 60x22mm so we can not fit all certification and warning information onto the label. As such we place a packaging leaflet inside every box of LocoTags. A PDF of this leaflet is appended to the bottom of this article

Batteries

The unit uses a 320mAh primary battery (non-rechargeable)

• Do not expose to temperatures > 60°
• Do not incinerate or disassemble.
• Recycle after use.

Product Certification

This product has been certified to the following standards:

• CE & UKCA
  • EMC, RF-EMC, RF, Safety

• FCC & IC
  • RF, EMC

• MIC

• RCM

• ANATEL

• SUBTEL

• WPC

• IFTEL

• NOM

• IMDA

• NCC

• RoHS 2.0

Airline Approvals

Pending – to include:

TNT, COPE, TSS, Air India, Vistara, IndiGo, Qatar Airways, Etihad Airways, Cathay Pacific, SpiceJet, Garuda Indonesia, Korean Air, Air Asia, Go Air, CargoLux, Air China, Singapore Airlines, KLM.

Environmental Considerations

The equipment may contain substances that are harmful to the environment or human health. Please recycle this unit appropriately. Please contact your local authority for disposal or recycling information.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

FCC statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

·If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.

RF exposure warning

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

NOTE: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>