SYNCWARE SW-WL686 Flexible Support Holder Magnetic Wireless Charger User Manual
- June 6, 2024
- SYNCWARE
Table of Contents
SYNCWARE SW-WL686 Flexible Support Holder Magnetic Wireless Charger User
Manual
The Desktop Flexible Support Holder Magnetic Widest Charger to snap and secure your Phone for easy viewing angles while getting a more efficient wireless charge at the same me. The magnetic charging stand automatically connects your phone to the sweet spot and begins to charge. avoiding charging slowdown or other interference. You on also charge AirPods or other earbuds on the charging pad below.
Note:
- Please use a pone( adapter with a 20W or higher output.
- Provides 7.SW Max charging for the iPhone.
Product Diagram
- Charging Stand
- Charging Pad
- Flexible Support Holder
- LED Indicator
- USB-C Port
- Magnetic Plate
- Positioner
- Round Sticker
Packing List
Desktop Flexible Support Holder Magnetic Wireless Charger
- Magnetic Plate
- Positioner
- Stickers
- User manual
How to use the Magnetic Plate
If you have a non-MagSafe case. or your ?hale may not swoon the magnetic connection the Magnetic Plate included helps to realize magnetic wireless charging for Phone 8 or later. Please side it to the back of the phone case for a sold magnetic connection for charging efficiently.
Operating Steps
-
Use the positioner and stickers to locate the Center part of your phone cases.
-
Place and install the magnetic plate in the central position of the phone case.
-
Connect to the adapter and snitch on the power. then place the phone or earbuds to start charging.
-
You can adjust the phone viewing angels freely by rotating the support holder.
Notes:
- Better use with the magnetic date to ensure a sold magnetic connection
- Please use the kits, provided or other authorized accessories only
- Do not place coins. cards, key. or any other magnetic goods.
- Do not disassemble. repair or reassemble the product.
- Keep away from liquids or high temperature.
- Do not knock or drop this product to avoid internal damage
- Dispose of this product as per local law and regulations.
FCC WARNING
This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions II) this device may not cause harmful interference and 12) this device must accept any interference received. including interference that may cause undesired operation. Arty changes or modifications rice expressly approved by the party responsible for compliance could avoid the users authority to operate the equipment
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. uses and can radiate radio frequency energy and 6 not installed and used in accordance with the instructions, may cause harmful interference to redo communications However. there is guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures.
- Reorient or relocate the receiving entente.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the recover is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with minimum distance between 20m the radiator your body.
FCC ID: 2ASUP- SW-WL686
Manufacturer’s Name. Shenzhen Leaderment Technology Co. Ltd. Sample
Description: Desktop Flexible Support Holder Magnetic Wireless Charger
Model number. SW-WL686
Operating Temperature: -10°C to 406 C
Manufactures Name: Shenzhen Leaderment Technology Co.. Ltd.
Sample Description: Desktop Flexible Support Holder Magnetic Wireless Charger
Model number. SW-WL686
Operating Temperature -10′ C to 40′ C
This device was tested for operations. To comply wed RF exposure requirements. a minimum separation distanced 20cm must be maintained between the user’s body and the charger. including the antenna. Third -party belt-dips. holsters. and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirement and should be avoided. Use only the supplied or an approved antenna. The device is in compliance with the essential requirements and otter relevant provisions of the UK Redo Equipment Regulations 9 2017:1206 (as amended. 1.The device conches with RC specification when the device used at 70cm form your body.
Declaration of Conformity:
Hereby, Shenzhen Leaderment Technology Co.. Ltd. Declares that the product SW-
WL686 is in compliance with the following Directives: Radio Equipment
Regulations 2017. Electrical Equipment (Safely Regulation 2016 and The
Restriction of the Use of Certain Hazardous Substances it Electrical and
Electrical Equipment 2012. The Full test of the UK declaration of conformity
is available at the following internet address. https://www.leaderment.com
| Radiated H-field (transmitter 1) | -9.24dBuA/m@10m) (only for EU and UK |
|---|---|
| Radiated H-field (transmitter 2) | -12 17dBuA/m@10m) (only tor EU and UK) |
| TXIRX frequency range | 110-205 kHz (only for EU and UK) |
| TXIRX frequency range | 115-205 kHz (only for FC |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>