AiDoohiky A10 New Smart Baby Monitor User Guide

AiDoohiky A10 New Smart Baby Monitor

**PRODUCT PACKAGING LIST

**

• HOST—————————-x1
• THE POWER ADAPTER———x1
• POWER CORD—————————————-x1
• RESET NEEDLE—————————————x1
• SILICONE SLEEVE FOR BIG EYED RABBIT——x1
• PRODUCT CERTIFICATE—————————-x1
• AN INSTRUCTION MANUAL————————x1

PRODUCT INTRODUCTION

PREPARATION FOR USE

1. CHECK NETWORK
   Use robot please check the network environment.The installation of the device needs to be carried out in a 2.4G Wi-Fi network environment. (5G Wi-Fi is not supported temporarily)

2. CHECK THE MOBILE PHONE
   Android 5.0 and above, IOS 11.0 and above the operating system can be installed by mobile phone .

DOWNLOAD AND INSTALL THE APP

Scan QR code download the APP and complete the installation.

EQUIPMENT OPERATION

1. BOOT
   Plug in the power cord and turn on the device.

2. REGISTER LOGIN
   First use Click Register, follow the prompts to complete the registration and login.
   

3. ADD EQUIPMENT
   Click Add Device and add device as prompted
   Note: “This device is only supported on 2.4GB Wi-Fi networks.”

4. BEGIN TO USE
   Click the device added successfully to start using

WORKING STATE **

**

EQUIPMENT INSTALLATION DIAGRAM

Strongly recommended:
In order to give full play to the optimal recognition effect of the equipment De vice AI function, you are strongly recommended to choose the appropriate installationThe bracket ins talls the device directly above the baby bed; And About 60CM-70CM away from the baby Place the device directly above the crib

• It can make the equipment take a clearer picture Get a wider view of your baby’s every move
• It is convenient to soothe the baby’s emotion through the device when the baby cries
• It is not recommended to put the equipment
• in places frequented by children .Prevent the equipment from causing harm to the baby

WARM PROMPT

• Please place the product out of reach of children to avoid the occurrence of danger caused by children eating parts by mistake;
• Do not use a non-original power adapter because it may cause fire, explosion, or other hazards.
• Please avoid placing the product or accessories in damp places, so as not to affect the normal use of the product;
• For the safety of you and your family, please ensure that the products you purchase are not bound or authorized by unauthorized persons. AiDoohiky will take strict measures to protect the security of your information and your family.

NAME AND CONTENT OF HARMFUL SUBSTANCE
In order to meet the relevant provisions and requirements of “Measures for the Management of The Restricted Use of Hazardous Substances in Electrical and Electronic Products”, this product Hazardous and toxic substances, classified by component, are declared as follows:
Description table of harmful substance content state of the product

The harmful substances contained in this product are caused by the current technical limitations and no alternative substances can be found. And within the scope of the EU RoHS exemption, special consideration has been given to the design of the product. Ensure that exterior components are made of non- toxic and environmentally friendly materials, Consumers do not come into contact with hazardous substances under normal use. No harm to baby.

AFTER SALES SERVICE

PRODUCT SERVICE SUPPORT INFORMATION

• aiDoohiky Ser vice email：support@sinano-ai.com
• aiDoohiky The official website：www.aidoohiky.cn
• Shenzhen Sinano Int elligence Technology Co.Ltd
• Addr ess: Room 4704A , No .1 Building, Excellent Centur y Center , No .2030 Jintian R oad, Futian District ,Shenzhen ,China

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

FCC Warning
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>