Srichpk P36D HERO BAND III Color Screen Fitness Tracker User Manual
- June 6, 2024
- Srichpk
Table of Contents
HERO BAND III
Color Screen Fitness
Tracker User Manual
Appearance Explain
Charging diagram
Strictly follow the operation shown in the figure below:
- Please use the charging stand provided with the product to charge the charging contacts on the back of the bracelet.
- Plug the USB tap into the USB adapter (excluding in the packaging)
- Do not use a battery adapter with a voltage exceeding 5V and an output current exceeding 1A for charging, otherwise, it will cause charging failure and damage the magnetic charging cable or equipment.
Functions Introduction
Bracelet Time Main Page: Display the bracelet time, day of the week, steps, and other information.
Blood oxygen: On the blood oxygen measurement page, touch the screen to start th e measurement. After the vibration, the measurement result will be displayed. More detailed information analysis and data recording can be synchronized to the APP to view.
Steps: record the current number of steps of the bracelet, Calories, and distance
Sleep: the bracelet records and shows the total sleep time you had last night, as well as deep sleep time, light sleep time. More detailed information analysis and data records can be viewed in the APP synchronously.
Weather information: the weather page will display current weather, air quality information, and conditions for tomorrow. This function works must connect to the APP, and the phone must open GPS positioning, and allow the APP to have access to the phone’s location.lf you disconnect or turn off your phone’s GPS for a long time, the weather information will not be updated.
Message notification: the bracelet can receive phone calls, text messages, WeChat, QQ, and other notifications and alerts on the phone, and the corresponding push project switch can be opened on the APP. This page can store the last 3 message records. Note that this function should be connected to the bracelet in the APP and the Settings should be completed according to the prompts. Apple’s phone, when connected, has to select the match in a pop- up match request.
Exercise: The bracelet shows the latest exercise time, heart rate, and calorie information. Click the exercise icon to enter the multi-function exercise mode. You can choose to open the corresponding exercise mode measurement.
Heart rate: On the heart rate measurement page, touch the screen to enter
my measurement. After the vibration, the measurement result will be displayed.
More detailed information analysis and data recording can be synchronized to
the APP to view.
Blood pressure: On the Blood pressure measurement page, touch the screen
to start the measurement. After the vibration, the measurement result will be
prompted. More detailed information analysis and data recording can be
synchronized to the APP to view
Breathing training: After entering this function, the breathing training
mode is automatically turned on, and breathing training is performed according
to the animated graphics displayed on the bracelet. Multiple vibrations
indicate that the training is complete.
Settings: Click the settings icon on this page to view the settings:
mute/brightness adjustment/dial/restore factory settings/stopwatch/ shutdown
and other functions.
Take Photocontrol: after connecting to the APP, the bracelet can be used
as the remote control of the phone camera. Open the camera on the phone, and
long-press the touch screen to take photos.
Music control: after connecting to the APP, the bracelet can control the
play/ pause/play of the music player on the mobile phone. This function must
open the mobile phone player before you can control on the smart bracelet.
Bracelet APP Installation
This product is a Wireless transmission product, and many functions need to be connected with the supporting APP before it can be used. Only in the APP, after the bracelet is connected, other functions can be used, such as time synchronization, call reminder and information content push, weather display, remote camera, music control, etc. (do not directly on android phones Scan the following QR code to download the APP to connect.Apple mobile phone) You can search for hero band Ill downloads in the App Store.
Connecting smart bracelets explain
Note: When the phone is connected to the bracelet,it needs to keep the Bluetooth of the phone open, and there is no other matching device in the Bluetooth of the phone.don’t connect your android phone directly to your mobile phone in biuetooth.
APP operation instructions
- Enter the APP movement page and press your phone screen to pull down and refresh the bracelet data.
- Click the steps, sleep, and other blocks, and enter the analysis of the daily or recent exercise and sleep data.
- Click the exercise heart rate/blood pressure blocks to enter the data of the day or recent, or click the APP to measure the heart rate and blood pressure. The test data will be automatically saved to the phone.
Attention
- Do not charge in the condition of water stains.
- This product is an electronic monitoring product, which is not used as medical treatment. The data is for reference only.
- Don’t wear this device when bathing or swimming for a long time.
- Use the matching charging cable for charging.
Frequently Question And Answers
1. The bracelet cannot receive the reminder. Android phone Settings:
A: make sure the APP has an alert switch on.
B: confirm whether the message can be displayed normally on the notification
bar, and the notification push of the bracelet can be read Mobile phone
notification message; If there is no message in the notification bar, the
bracelet will not receive the push. (need find notification and status bar in
mobile phone settings, and open WeChat, QQ, phone, SMS, Hero band Illswitch)
apple system phone settings:
A: make sure to select the allowed pairing when connecting the bracelet. can
be checked in the phone Settings – Bluetooth, if there is one at the backend
of the connected device <0—x“.°0, indicating that a pairing has been made.lf
there is no in the backend (i) , there is no pairing, reconnecting after
unbind.
B: open the phone settings — click on the notification — click WeChat, QQ,
SMS, phone — open the permission notice. Displayed in the “notification
center”.
2. Android phones don’t connect the bracelet. For android phones, please do
not connect with the bracelet directly in the Bluetooth of the phone. Please
download the APP firstly. And go to the APP to search the device and connect.
Restart your phone’s Bluetooth and bracelet if necessary.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>