Tivoli Audio 34543374 PAL+BT Portable Audio Laboratory Owner’s Manual

PAL+BT Portable Audio Laboratory ™
Owner’s Manual

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
****This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. WARNING – To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Operate this product only from the type of power source indicated on the rear panel. For products using an external power supply, use an exact replacement if lost or damaged. For products operating from battery power, refer to the user manual.

15. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
    a. When the power supply cord or plug is damaged
    b. If liquid has been spilled or objects have fallen into the product.
    c. If the product has been exposed to water or rain.
    d. If the product does not operate normally by following the operating instructions.
    e. If the product has been dropped or damaged in any way.
    f. When the product exhibits a distinct change in performance.

16. When replacement parts are required, be sure your service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

17. Upon completion of any service, ask the service technician to perform safety checks to confirm the product is in proper operating condition.

18. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

19. The recommended operating temperature range is 5ºC to 40ºC (41ºF -104ºF).

20. The 9 VDC input is suited for operating this product in a boat or camper using an optional 9 VDC, 1 A fused adapter.

21. Keep this product a safe distance away from naked flames, such as a lit candle.

22. WARNING – The mains are not disconnected in the off position, but the circuits are de-powered.

23. Canada complies with RSS210, ICES-003.

24. The power cord plug serves as the disconnect device and should remain readily accessible.

This product can be recycled. Products bearing this symbol must NOT be thrown away with normal household waste. At the end of the product’s life, take it to a collection point designated for recycling of electrical and electronic devices. Find out more about return and collection points through your local authority.

The European Waste Electrical and Electronic Equipment (WEEE) Directive was implemented to dramatically reduce the amount of waste going to landfills, thereby reducing the environmental impact on the planet and on human health. Please act responsibly by recycling used products. If this product is still useable, consider giving it away or selling it.

PAL+BT Instructions

Congratulations on your purchase. We believe the PAL+BT to be one of the finest portable DAB/DAB+/DMB/FM radios on the market today. With the addition of Bluetooth wireless technology, you can stream your music wirelessly to the PAL+BT.
We know you are eager to begin listening to your new radio, but in order to take full advantage of what your PAL+BT is capable of, please take a moment to read this owner’s manual and the safety instructions. If you have any questions, please do not hesitate to contact your dealer or Tivoli Audio.
Please save the carton and original packing should you ever need to ship your radio, as shipping damage is not covered by the factory warranty.
On behalf of all of us, thank you for choosing Tivoli Audio and enjoy your new PAL+BT!

Packed with your PAL+BT you should find:

• One (1) external power supply
• One (1) Li-Ion battery pack (installed)
• One (1) remote control (battery installed)

Please contact your dealer/distributor or Tivoli Audio if any of these items are missing.

Getting Started

1. Extend the antenna.
2. Connect the included power supply to the PAL+BT and plug it into a wall outlet.
3. Briefly press the Power/Volume knob on the front of the PAL+BT or, if it is plugged in, press the button on the remote control. Wait for the Full Scan to finish.
4. Press the or buttons on the remote control to view available stations and highlight the station you wish to listen to.
5. Press the Menu/Select button on the remote control to tune the highlighted station.
6. Press the Volume or buttons on the remote control to adjust the volume level to your preference, or rotate the Power/Volume Knob.

Guide To Features (Front Panel)

1. Power/Volume Knob: The Power/Volume Knob serves many functions:

• Power: When the PAL+BT is off, press the knob briefly to power the unit on. When the PAL+BT is on in any source, press and hold the knob to power the unit off. (Note: the remote’s Power button will not turn the PAL+BT on when the unit is off and not connected to the external power supply.)
• Volume: When the PAL+BT is on in any source, rotate the knob clockwise to increase the volume level and counter-clockwise to decrease the volume level.
• Source: When the PAL+BT is on in any source, press the knob to switch between sources.

2. Tuning Knob: The Tuning Knob serves many functions.

• Tuning: When the PAL+BT is on in any source except Aux, rotate the knob clockwise to manually tune-up and counter-clockwise to manually tune down.
• Snooze: When the alarm sounds, press the knob to engage Snooze. An icon will show on the display when Snooze is active. The Snooze time is fixed at 7 minutes. Press again during Snooze to cancel the Snooze. The Snooze function works when the PAL+BT is connected to the external power supply. When operating on battery-only power, pressing Snooze will have no effect.
• PRESETS: Press briefly to recall the station associated with that specific preset. In FM mode, the preset number will be indicated on the display. There are 5 presets for each band.

LCD:

: Volume level
: Sleep timer
: Snooze timer
: Alarms 1 and 2 (center digits): Time
: Reception level
FM: FM band
DAB: DAB/DAB+/DMB band
AUX: Auxiliary
: Battery power/charging status
: Mono/Stereo indicator for headphone output
T: Manual tuning mode

Guide To Features (Rear Panel)

1. FM/DAB ANTENNA: When listening to FM, adjust this telescoping antenna and position it for best reception. In strong FM signal locations, reducing the antenna’s length may provide better reception. When the unit is not in use keep the antenna retracted to protect it.
2. AUXILIARY INPUT: To hear audio from another device (such as a portable CD or MP3 player) through the PAL+BT’s main speaker, connect the device’s audio output to this input and set the radio’s source to Auxiliary Input. This jack accepts a 1/8″ stereo male mini plug. Note that you may need to adjust the volume level differently for an auxiliary device than the level normally used for radio listening. Keep the rubber plug inserted when this input is not in use.
3. HEADPHONE OUTPUT: Connect a headset to this stereo output for private listening. The headphone volume will be controlled by the PAL+BT’s volume knob. Connecting a pair of headphones will mute the PAL+BT’s main speaker. This jack accepts a 1/8″ stereo male mini plug. You may also record from the PAL+BT or use it as a high-quality stereo tuner by using this output. Keep the rubber plug inserted when this output is not in use.
4. BATTERY COMPARTMENT: Stores the Lithium-ion battery pack. Do not load any other type of batteries in the compartment. See “Replacing the battery pack.”
5. DC INPUT: Use this input to operate the PAL+BT using its included Tivoli Audio 9V 2A power supply. Use only the power supply provided with this product. Should the power supply get damaged or misplaced, contact Tivoli Audio for a replacement. Keep the rubber plug inserted when this input is not in use.

Remote Control

In addition to duplicating most of the front panel controls, the remote control adds the following functions:

1. POWER: Press briefly to power the PAL+BT on. The radio will power on to the last source used. Press again to power off. The remote’s Power button will not turn the PAL+BT on when the unit is off and not connected to the external power supply.
2. Mute/Snooze: Press to mute the audio (the icon will show no volume bars) while the unit is playing and press again to restore sound, or adjust the volume. Press to mute the alarm after the alarm sounds. An icon will show on the display when Snooze is active. The Snooze time is fixed at 7 minutes and is not adjustable. The Snooze function works when the PAL+BT is connected to the external power supply. When operating on battery-only power, pressing Snooze will have no effect.
3. ALARM: Use the tu and Select buttons to adjust and set the alarms. For very important notes and a complete step-by-step guide, refer to the section titled “How to set the Alarm”.
4. SLEEP: Press repeatedly to view the amount of time the radio will play before it turns off automatically and press the Select button to select that time. When the sleep timer is active you can check the remaining time by pressing the Sleep button on the remote. A will show on the display when the Sleep timer is active. To cancel Sleep, press the Sleep button until the display shows “Off”. When operating on battery-only power (external adapter not plugged-in), if Sleep is engaged and the alarm is set, after Sleep ends, the alarm will not sound. To use both Sleep and Alarm features, please be sure the external adapter is connected.
5. SOURCE: Press repeatedly to change sources.
6. INFO: Press repeatedly to cycle through the information available depending on the source mode. This function does not work in Auxiliary mode.
7. PRESETS 1-5: Press and hold to store the currently tuned station. Press briefly to recall the station associated with that specific preset. In FM mode, the preset number will be indicated on the display. There are 5 presets for each band.
8. VOLUME +/–: Press the Volume + button to raise the volume level or the Volume – button to lower the volume level. If the audio ever sounds distorted, lower the volume level to avoid damaging the speaker. Adjusting the volume while the PAL+BT is muted will cancel the muting.
9. : Press to navigate within the menus. Use these same buttons to manually tune-up or down when in FM mode and to Full Scan stations. A “T” will show on the display to indicate manual tuning mode. Press and hold to move quickly through the frequencies. It will take a second until the frequencies begin to change. Press for 1.5 seconds and release to Full Scan to the next station detected. The display will show “Scanning…” Also, refer to “Scan Setting” under the section “Menu and Specific Features”.
10. : The right arrow button duplicates the Select button. The left arrow button duplicates the “Back” button in certain menu items.
11. MENU/SELECT: Press and hold to enter the main menu and press briefly to select items within the menu. For more, see the section marked “Menu”.
12. BACK: Press to go back to the previous menu page.
13. MONO: Press to change the Stereo/Mono setting. The display will show “ST” for stereo. “Mono” or “Stereo” will also be one of the fields shown when pressing the Info button on the remote in FM mode. If you are listening to a noisy FM station in stereo, switching to mono may improve reception. Note: only FM mode can be changed to Mono. Also see “Balance” under “Menu and Specific Features”.
14. BATTERY HOLDER: Remove the protective strip protruding from the battery holder before using the remote control. Should you ever need to replace the remote’s battery, use Lithium button cell battery model CR2025.

CAUTION: Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type. Dispose of spent battery according to your country’s regulations.

Menu and Specific Features

Press and hold the Menu button on the remote to enter the main menu. Use the remote’s buttons and the Select button to change the items within the menu. Use the Back button to navigate back, or wait for 15 seconds until the timeout expires.

An asterisk (*) indicates the shown menu item is currently set.

1. SCAN SETTING (FM MODE ONLY): Press the Select button and use the and Select button to choose between “Strong stations only” or “All stations” when performing a Full Scan (see #9 under “Remote Control”). Selecting “All stations” increases the sensitivity of the scan, possibly resulting in the Full Scan stopping on noise. This feature is not accessible in Auxiliary mode.

2. EQUALIZER: Press the Select button and use the buttons to select the desired EQ setting from the following options: Normal, Classic, Jazz, Pop, Rock, and Speech. Press the Select button to enable the desired EQ setting.

3. TIME (FOUND UNDER SETTINGS):
   Set 12/24 hour: Press the Select button and use the and Select buttons to choose a 12 or 24-hour clock format.
   Set Time/Date: Press the Select button and use the and Select buttons to adjust the hour and then minutes, immediately followed by the date. You must set the Auto-update to “No update” in order to set the time manually. For more, refer to “Auto-update” below.
   Auto Update: Press the Select button and use the and Select buttons to choose between “Update from any”, “Update from DAB” (also DMB), or “Update from FM” (RDS). For any of the auto-updates to work, you must have consistent reception of DAB or FM RDS with a time/date signal provided. It could take up to a minute or more for the clock to update. Tivoli Audio is not responsible for inaccurate time/date information provided by the auto-update signal.
   To set the clock manually, select “No Update”, and then select “Set Time/Date” under the “Time” menu using the or t u buttons and the Select button to set the hour. Repeat to set the minutes and press Select to save. Within this same “Time” menu are additional options to set the date format and 12/24 hour clock mode.
   NOTE: During a power outage, the alarm time(s) and the clock will be maintained by an integrated backup memory. When “Auto-update” is set to “Update from any”, the radio may find the clock signal from the last listened station, even when the PAL+BT is in standby.
   Set Date Format: Press the Select button and use the and Select buttons to choose the date format you prefer.

4. BACKLIGHT (FOUND UNDER SETTINGS):
   Timeout: The backlight level is configured at the factory to be constant. However, you can customize the backlight to automatically change to a “Dim level” setting after a fixed period of time whenever no controls are used. Once a control on the unit or the remote is pressed, the normal backlight level is restored.
   Press Select and use the and the Select buttons to set the amount of time it will take for the backlight to change to the dim level from 10, 20 ,30, 45, 60, 90, 120, or 180 seconds, or to keep the timeout feature Off.
   On Level: Press Select and use the and Select buttons to choose the intensity of the backlight.
   Dim Level: If you selected a time for the backlight to change to a dim setting under “Timeout”, press Select and use the and Select buttons to choose the intensity of the backlight when it changes to this dim setting. Setting the Dim level to “Off” may be desirable if the display backlight is bothersome while sleeping. Using the Dim level feature may also help to maximize battery playback time.

5. LANGUAGE (FOUND UNDER SETTINGS): Press Select and use and Select buttons to set your language.

6. FACTORY RESET (FOUND UNDER SETTINGS): Press Select and use the or and Select buttons to confirm (Yes) or reject (No) the factory reset. A factory reset will restore factory defaults and cancel all your personal settings, such as station presets and language. The Factory Reset may not be accessible when operating on battery-only power.

7. ID (FOUND UNDER SETTINGS): Press Select to view the ID. If you contact your dealer or Tivoli Audio with a question, you may be asked to provide the number shown in this field.

8. SLEEP (FOUND UNDER SETTINGS): Press Select and use the button and the Select buttons to set the sleep timer to one of the available times. There is also a dedicated Sleep button on the remote control. A small clock face will show on the display when the Sleep timer is active.
   NOTE: When operating on battery-only power (external adapter not plugged- in), if Sleep is engaged and the alarm is set, after Sleep ends, the alarm will not sound. To use both Sleep and Alarm features, please be sure the external adapter is connected.

How to Set the Alarm

Access the alarm setting either through the main menu or by pressing the alarm button on the remote.

1. Alarm 1 is shown first. Use the Alarm and Select buttons to choose between Alarm 1 and Alarm 2. Note: At any point, you can navigate through the alarm menu by using the Back or t buttons, and the Selector u buttons.
2. Use the and Select buttons to set the alarm on or off. If the time and date are not set, the PAL+BT will prompt you to set the Time/Date first.
3. Use the buttons to set/change the hour, then press Select. Repeat this process to set/change the minutes, followed by AM/PM (if time is set to 12-hour format), then press Select.
4. Use the button to select how long you want the alarm to sound, then press Select.
5. Use the buttons to select the source you wish to wake to, then press Select. If you set the source to DAB (includes DAB+/DMB) or FM, use the buttons to select the station preset or last listened, then press Select. If the alarm source is set to DAB and the last listened or preset station is unavailable at the time the alarm sounds, the alarm will default to the tone.
6. Use the buttons to set how often the alarm should be set to wake, then press Select. If “Once” is selected, you must set the date you wish the one-time alarm to sound.
7. Lastly, use the buttons to set the volume level of the alarm, then press Select.
8. Repeat this process for Alarm 2 if desired.

If you make a mistake at any point in the process, press the Back button on the remote and begin again.
Your settings will not be saved unless you complete the entire process and the display shows “Alarm Saved”.

IMPORTANT NOTES:

• The alarm cannot sound if the PAL+BT is off and not connected to the external adapter.
• The alarm volume will ramp up over time. It will take several seconds until the alarm reaches the volume level set in the alarm menu.
• Should power be lost or the battery becomes discharged, the alarm time will be saved, but the alarm cannot sound without power to the PAL+BT.

ALARM OPTIONS:

Alarm Quick Set: With the PAL+BT in standby, repeatedly press the alarm button briefly to toggle each alarm on or off.
Alarm Off: To stop the alarm, press the Alarm or Power button on the remote.
Snooze: To activate Snooze, press the Snooze button on the remote. The Snooze time is not adjustable. When operating on battery-only power, pressing Snooze will have no effect.
Note: When in Snooze mode, you can see the remaining Snooze time by pressing the Snooze button on the remote. If you press the Alarm or Power button on the remote, then the Snooze countdown will be canceled and the PAL+BT will go into Standby or off if operating on battery-only power.

Digital Radio (DAB/DAB+/DMB) Mode

STATION LIST: Use the buttons on the remote to show all available DAB/DAB+/DMB stations. Use the buttons to highlight a specific station and the Select button to tune that station. The Station list will disappear after 7 seconds.
Press and hold the Menu button on the remote to enter the main menu. Use the buttons and the Select button to change the items within the menu. Use the Back button to navigate back, or wait for 15 seconds until the timeout expires.
An asterisk (*) indicates the shown menu item is currently set.
NOTE: Upon entering Digital radio mode, if the Station list is empty, a full scan will initiate.

1. FULL SCAN: Searches the entire frequency range. If you move the PAL+BT to another location, you must perform a new scan so the radio will find stations in the new location. To cancel the auto scan, press the Back button on the remote.
2. EQUALIZER: Please refer to the section marked “Menu and Specific Features”.
3. MANUAL TUNE: Press the buttons to manually tune specific DAB/DAB+/DMB frequencies, then press Select to tune the displayed frequency.
4. DRC: Dynamic Range Control allows you to change the sound level of stations to make quiet passages louder to compensate for a noisy environment, or when listening at a low volume level.
5. ADVANCED MODE: If the PAL+BT is relocated to a different area, you may find stations with the same name. If you enable “Advanced View”, “Long labels”, and “Show Ensemble” under Advanced Mode, you will be able to differentiate between extended station names. For DAB/DAB+, we suggest disabling all the Advanced Mode settings. For DMB, we suggest enabling them.
6. PRUNE: If the PAL+BT is relocated to a different area, some stations may become unavailable. Select “Prune” to remove unavailable stations from the Station list. Use the or tu buttons and the Select button to confirm (Yes) or deny (No) removing unavailable stations.

NOTE : When moving the PAL+BT to another location where there may be different DAB stations from the previous location, it is recommended to run a “Prune” to remove unavailable stations.

DAB DISPLAY MESSAGES:
Secondary Services: Secondary stations will be indicated by a >> symbol next to the station name. Secondary services may not be available in your area.
“?”: If this symbol appears next to the station name, it means the station is invalid or inactive.
“Not Available”: Shown when tuning a DAB station with an insufficient signal.

Bluetooth Operation

Prior to pairing, verify your device supports Bluetooth 5.0 and that your device is not connected to any other Bluetooth product. Devices may pair differently. Below is a general guide.

1. Change the source to Bluetooth, then press and hold the Scan button. Turn the volume up about ¼ to start. Also turn up the volume on the source device (the device you are streaming from).
2. Turn on the Bluetooth wireless technology on your enabled device.
3. Select “Tivoli Audio PAL+BT ” when it appears on your device’s screen to initiate searching. Some devices may prompt you for a PIN. If so, enter “0000”. “Tivoli Bluetooth” will change from “Not Paired” to “Connected”.
4. Once the radio displays “BT Connected” on its screen, you are paired to the radio and can begin playing your music wirelessly. Adjust the volume level on your device. You should not have to pair your device again.
   Depending on your device, you may need to make multiple attempts at Pairing and/or Connecting to the PAL, but please give your device adequate time to Pair or Connect before repeating the process.

NOTE:

• The PAL+BT will remember pairing information for up to 8 devices. Additional devices can be paired, but the least-recently-used device will be replaced by the newly paired device.
• If the audio drops out or stops during playback, move your device closer to the PAL+BT, or check to be sure another wireless device is not interfering with the signal.
• When switching from Bluetooth to DAB or FM, you may need to re-adjust (lower) the radio’s volume level.

About The Battery Pack

The PAL+BT uses a sealed pack of Lithium-Ion cells. Use only an authorized Tivoli Audio PAL Series Lithium-Ion battery. The estimated battery life on a full charge is 12 hours.

CHARGING:

To charge the battery, plug the PAL+BT in and place it in Standby. From full discharge, the battery will be completely charged within approximately 3.5 hours. Because the battery is new, it may take 4-5 full charge/ discharge cycles until you experience average playback performance times. During charging, the battery icon on the LCD will flash. The battery icon will stop flashing and all 3 bars will be shown on the LCD once the battery is fully charged. The battery does not charge while the PAL+BT is plugged in and turned on, but the battery icon will still show the status of the battery. In short, with the PAL+BT plugged in, place it in standby whenever you want to charge the battery.

LOW BATTERY

When running solely on the battery, as the battery becomes discharged, the battery icon will drop from 3 bars to 2 bars, to 1 bar, and finally, show an empty battery. The audio will begin to sound distorted when the battery starts to reach a low level. This is normal and is an audible warning the battery should be charged soon. Because the PAL+ Li-Ion battery has no memory, it is not necessary to wait until the battery is exhausted before recharging, although recharging from a discharged battery will not harm the battery.

The battery icon is an approximation of the power/charging status. It may also take several seconds for the icon status to stabilize. If the battery is removed and the PAL+ operates solely from the external adapter, the icon on the LCD will show an empty battery.
Leaving the PAL+BT plugged in, even when not in use, ensures the batteries will be charged when you need them.
If the PAL+BT is not plugged in, the batteries will self-discharge as a safety measure. There is no harm in continuously operating the PAL+BT with the power supply.
Note: It may take up to 4 charge/discharge cycles before the batteries are operating at full capacity when new or left unused for several weeks.
REPLACING THE BATTERY
Should you ever need to replace the battery, lift the antenna up and use a Philips-head screwdriver to remove the two screws holding the battery cover in place? Lift the battery cover off and take note of how the lead is connected to the battery pack prior to disconnecting. Replace the pack making sure to re-connect the leads correctly. Replace the battery cover by inserting the bottom lip first, then screw the cover back on.

CAUTION: To reduce the risk of fire or personal injury, use an exact- replacement battery pack available through Tivoli Audio or our authorized dealers and dispose of the spent battery pack according to your country’s regulations. The battery pack must not be exposed to excessive heat such as sunlight, fire, or the like. Use of a non-Tivoli Audio battery pack could damage the  AL+BT.
For information about the remote control’s battery refer to Point 14 of the “Guide to Features (Remote Control)”.

Digital Radio/FM Reception

When moving the PAL+BT to another location where there may be different DAB stations from the previous location, it is recommended to run a “Prune” to initiate a new scan to refresh the DAB station list.
FM: In strong signal locations, reducing the antenna’s length may provide better reception.

RDS (FM band only)

The Radio Data System (RDS) transmits text data along with the audio broadcast. Not all FM stations utilize this service, thus text may not be present with some stations. For stations broadcasting RDS, the text still might not appear or might appear scrambled if the signal is too weak. This is not a fault of the PAL+BT. In such cases, experiment with the position of the FM antenna. Note RDS content is determined by each individual FM station.

Handling the PAL+BT

• The PAL+BT is weather-resistant, but it is not weatherproof. It should not be immersed in water or held under running water. It also should not be exposed to extreme temperatures.
• The PAL+BT is designed to be portable, but it is not indestructible. Do not drop it, throw it, or subject it to strong impacts.
• Always grip the PAL+BT using the side indentations to reduce the chance of it slipping out of your hand.

Cleaning

Never use any harsh cleansers or solvents on your radio. Normal everyday wear and tear or damage resulting from cleaning or chemicals is not covered under the factory warranty. To clean the PAL+BT use a soft cloth and do not rub hard.

Limited Warranty

Tivoli Audio manufactures its products to very high standards and we are confident our products will perform well. Accordingly, we provide a limited warranty on this product against manufacturing defects in material and workmanship to the original owner. This warranty is non-transferable.

Products purchased in the European Union and Norway have a minimum warranty term of two years. For countries where minimum warranty terms are determined by statute, the warranty term is the statutory period required. In all other locations, the warranty term is one year.

This Limited Warranty covers the functionality of the product for its normal, intended use as specified in this Owner’s Manual. It does not cover a malfunction or damage that has resulted from improper or unreasonable use or installation, using the charger to charge alkaline batteries, faulty ancillary equipment, modifications, unauthorized repair, shipping damage or loss, abuse, accidents, use on improper voltage/current, power surges, lightning or other acts of God, excess moisture, normal wear and tear, commercial use, or purchase from unauthorized dealers. Proof of purchase as evidence the unit was purchased from an authorized dealer may be required for warranty service.

Please contact the dealer of purchase or local distributor for warranty service or repair.

Please refrain from opening this product or taking it apart as doing so will void this Limited Warranty. There are no user-serviceable parts inside. Tivoli Audio will not pay for costs incurred due to correction of reception problems, elimination of externally generated static/noise, loss of time, inconvenience, loss of use of the product, or damage caused by improper use of this product.

In the event the product is returned during the warranty term and is eligible for service under this Limited Warranty, we will repair or replace any defective parts within a reasonable period of time and free of charge.

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS SUBJECT TO SPECIFIED CONDITIONS. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS WHICH APPLY TO THE PRODUCT YOU HAVE ACQUIRED. THESE LEGAL RIGHTS VARY FROM COUNTRY TO COUNTRY. SOME PLACES DO NOT ALLOW THE EXCLUSION, RESTRICTION, OR MODIFICATION OF CERTAIN IMPLIED RIGHTS OR THEIR EFFECT. IN THOSE SITUATIONS THIS LIMITED WARRANTY WILL ONLY APPLY TO THE EXTENT THAT THE APPLICABLE LAW ALLOWS.

The laws of your country may provide you with legal claims against the seller or manufacturer of this product. This Limited Warranty does not affect those rights.
The provisions of the Limited Warranty are in lieu of any other warranties or conditions, except those provided by law. This Limited Warranty does not affect any legal rights provided to you by law and does not preclude any remedy you may have under law.

In countries where liability limits are not precluded by statute, the maximum liability of Tivoli Audio shall not exceed the purchase price paid by you for the product. In countries where limitations of liability are precluded by law, Tivoli Audio shall be liable for no more than the direct damages for bodily injury, and/or real or personal property arising from the negligence of Tivoli Audio.

Where not prohibited by law, Tivoli Audio shall not be liable for special, incidental, consequential, or indirect damages. Some places do not allow limitations on the exclusion or limitation of relief, special, incidental, consequential or indirect damages, or the limitation of liability to specified amounts, so the above limitations or exclusions may not apply to you.
This Limited Warranty is void if the label bearing the serial number has been removed or defaced.

If you purchased an extended service contract from your dealer and service is required after the term of this Limited Warranty has expired, please contact your extended service contract provider to obtain service.

For your convenience, you may register your product for warranty service online at our website www.tivoliaudio.com. There is no legal obligation for you to provide personal information. However, such information allows us to maintain a record of the Tivoli Audio products acquired by you and better understand the purchasers of our products. The information collected will be used for marketing purposes by Tivoli Audio and, where permitted, to contact you in relation to the products you have acquired or other products which might be of interest to you from Tivoli Audio or other companies. The information that you provide may be processed in another country.

For service, please contact your dealer or local distributor.

Specifications

Model:
Type:
Driver:
Receiving Bands:
Power:
Battery:
AC Adapter”
Dimensions:
Weight:| PAL+BT
Portable DAB/DAB+/DMB/FM radio with Bluetooth
wireless technology
2.5″ full range, video shielded
FM: 87.5-108.0MHz (receiving range may vary by region)
DAB (Band III)/DAB+/DMB: 174-240MHz
9VDC nominal
Li-ion, 7.4V, 2750mAh
Model DYS818-090200-K:
Input: 100-240V – 50/60Hz, 0.5A Max
Output: 9.0v, 2.0A
153 mm H x 92 mm W x 115 mm D
(6″H x 3.6″W x 4.5″D)
0.91 Kg
---|---

All specifications subject to change without notice. Tivoli Audio reserves the right to make product changes without notice. Tivoli Audio, the Tivoli Audio logo, PAL+BT, and Portable Audio Laboratory are trademarks of Tivoli Audio, LLC. The  Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Tivoli Audio is under license. Other trademarks and trade names are those of their respective owners.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>