Tivoli Audio M1P Model One+ FM/DAB+ Radio Owner’s Manual

Owner’s Manual

|

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN

|

---|---|---

ATTENTION
RISQUE DE CHOC ELECTRIQUE, NE PAS OUVRIR
PRECAUCION
RIESGO DE CHOQUE ELECTRICO NO ABRIR

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. WARNING – To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

6. WARNING: DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD. The remote control supplied with this product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

7. Clean only with dry cloth.

8. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

9. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

10. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding type plug has two blades and a third grounding prong wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.

11. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

12. Only use attachments/accessories specified by the manufacturer.

13. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

14. Unplug this apparatus during lightning storms or when unused for long periods of time.

15. Operate this product only from the type of power source indicated on the rear panel. For products using an external power supply, use an exact replacement if lost or damaged. For products operating from battery power, refer to the user manual.

16. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
    a. When the power supply cord or plug is damaged
    b. If liquid has been spilled or objects have fallen into the product.
    c. If the product has been exposed to water or rain.
    d. If the product does not operate normally by following the operating instructions.
    e. If the product has been dropped or damaged in any way.
    f. When the product exhibits a distinct change in performance.

17. When replacement parts are required, be sure your service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

18. Upon completion of any service, ask the service technician to perform safety checks to confirm the product is in proper operating condition.

19. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

20. The recommended operating temperature range is 5ºC to 40ºC (41ºF -104ºF).

21. The 12 VDC input is suited for operating this product in a boat or camper using an optional 12 VDC, 1 A fused adapter.

22.  Keep this product a safe distance away from naked flames, such as a lit candle.

23. WARNING – The mains are not disconnected in the off position, but the circuits are de-powered.

24. The power cord plug serves as the disconnect device and should remain readily accessible.

WARNING: THE AFFIXED MODEL ONE+ ANTENNA IS NOT INTENDED TO BE DETACHED.

This product can be recycled. Products bearing this symbol must NOT be thrown away with normal household waste. At the end of the product’s life, take it to a collection point designated for the recycling of electrical and electronic devices. Find out more about return and collection points through your local authority.
The European Waste Electrical and Electronic Equipment (WEEE) Directive was implemented to dramatically reduce the amount of waste going to landfills, thereby reducing the environmental im- pact on the planet and on human health. Please act responsibly by recycling used products. If this product is still useable, consider giving it away or selling it.

Model One+ Instructions

Congratulations on your purchase of the Model One+ table radio. We believe the Model One+ to be one of the finest table radios in the market today. We know you are eager to use your new radio, but please take a moment to read this owner’s manual and the safety instructions. If you have any questions, please do not hesitate to contact your dealer or Tivoli Audio.
On behalf of all of us, thank you for choosing Tivoli Audio, and enjoy your new Model One+ radio.

About Tivoli Audio

Tivoli Audio originated in Boston in 2000 with just one radio. Today we share our passion for music and design all over the world. Our products are created to bring harmony between quality- audio and design with the belief that both are equally important, and neither should be sacrificed for the other. Tivoli Audio products are perfected to deliver beautiful music.

Packed with your Model One+ you should find one each:

• One (1) AC Power Adapter
• One (1) attached FM/DAB telescoping antenna
• One (1) Remote Control

Please contact your dealer or Tivoli Audio if any of these items are missing.

Guide to Features

Front Panel

1. PRESET BUTTONS: Push down and hold to save a FM or DAB station to the preset button. To recall a station, quickly press the desired preset button.
2. POWER/SOURCE KNOB: Push the knob to turn on the unit. Once the unit is powered on, turn the knob to access the desired radio source.
3. SCAN BUTTON: In FM mode, press to go to the next available station. In DAB mode, press to refresh the station list. In Bluetooth mode, press to enable Bluetooth pairing
4. TUNING KNOB: Rotate the tuning dial to the right or to the left to adjust the FM frequency or DAB station.
5. VOLUME KNOB : Rotate the volume knob to the right to increase the volume or to the left to decrease the volume.
6. DISPLAY : Displays frequency and other information.

Rear Panel

1. SERVICE PORT: For use only by an authorized Tivoli Audio service center.

2. HEADPHONE OUT: Connect a headset (not included) to this variable stereo output for private listening. The headset will mute the primary speaker. The headset’s volume is adjusted using the volume knob. This stereo output accepts a 3.5mm stereo male mini connector. Avoid using headphones at high volume levels to prevent possible hearing damage.

3. AUX IN: To hear audio from another device, such as a CD player, MP3 player, or computer, connect said device’s audio output to this stereo input and turn the front source knob until you reach the AUX IN source. Switching to the AUX IN source does not turn on the connected device. This stereo input accepts a 3.5mm stereo male mini connector. The left and right stereo signals are summed to mono.
   NOTE: You may need to adjust the volume level differently for an auxiliary device than the level used for radio listening.

4. 12VDC/2A: This input is for use with a 2A fused, 12VDC adapter. The connector must be 5.5mm/2.1mm center positive. Only use the adapter provided with the radio. Contact Tivoli Audio directly for a replacement.

5. EXTERNAL FM/DAB ANTENNA: Adjust this telescoping antenna and position it for the best reception. In strong FM signal locations, reducing the antenna’s length may provide better reception.

Remote Control

1. MUTE: Mutes the radio.
2. ALARM: Press to set the radio alarm.
3. NAVIGATION ARROWS/SELECT: Use the arrows to navigate the on-screen options and confirm options with the SELECT button.
4. VOLUME UP: Press to raise the volume.
5. VOLUME DOWN: Press to lower the volume.
6. PRESET BUTTONS: Press to recall a saved radio station, and hold to save a new radio station.
7. SETTINGS: Press to enter the full settings menu.
8. SOURCE: Press to change the radio source.
9. SLEEP: Press to set the sleep timer.
10. POWER: Press to turn the radio on and off.

WARNING: DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD. The remote control supplied with this product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Bluetooth Mode

Prior to pairing, verify your device supports Bluetooth and that your device is not connected to any other Bluetooth product. Devices may pair differently. Below is a general guide.

1. Turn on the Model One+ and turn the source knob until “Bluetooth” appears on the display of the radio.
2. Press the “Scan” button on the front of the radio. The display should now read “Pairing Enabled”.
3. Turn on the Bluetooth on your enabled device.
4. Select “Tivoli Model One+|XXXXX” when it appears on your device’s screen to initiate pairing.
5. You will see “Bluetooth Connected” on the display of the Model One+ confirming connection and you can begin playing your music files wirelessly. Adjust the volume level on your device. You should not have to pair your device again.

Auxiliary Mode

Your Model One+ can be used as a standalone speaker. Simply use a 1/8” stereo cable to attach any line or headphone level source to the AUX input on the back of your radio. You can control the volume of the speaker using the volume control on the Model One+ or with the volume control of your audio source.

FM Mode

Manual Tune Up: To manually tune-up to a higher frequency station, rotate the tuning knob to the right.
Manual Tune Down: To manually tune down to a lower frequency station, rotate the tuning knob to the left.
Autoscan Up: To auto scan to a higher frequency, press the scan button.
Add a station to your preset stations: To add a station to your saved preset stations, press and hold the desired preset button. It is also possible to add presets by using your remote. Simply hold the number preset you would like to use and wait for on-screen confirmation. To delete the preset, either hold down the button on the remote or long-press on the bezel control.

DAB/DAB+/DMB Mode

Manual Tune Up: To manually tune-up to a higher frequency station, rotate the tuning knob to the right.
Manual Tune Down: To manually tune down to a lower frequency station, rotate the tuning knob to the left.
Rescan: To rescan for all DAB stations, press the scan button.
Add a station to your preset stations: To add a station to your saved preset stations, press and hold the desired preset button. Once added, you may access it using the remote. It is also possible to add presets by using your remote. Simply hold the number preset you would like to use and wait for onscreen confirmation. To delete the preset, either hold
down the button on the remote or long-press the preset button.

Settings

Note: All of these functions are available through the remote using the option on the remote.
Equalizer
Press the on the remote, then use the navigation arrows until appears onscreen. Push the SELECT button. Use the navigation arrows to choose the desired sound, then press the SELECT button to Confirm.
Use the navigation arrows to cycle between the six distinct Equalizer settings: Normal, Classic, Jazz, Pop, Rock, and Speech. Each setting uniquely adjusts the treble and bass levels.
System
Press the on the remote, then use the navigation arrows until appears onscreen. Push the SELECT button.

Backlight
Use the navigation arrows until appears onscreen.
Push the SELECT button on the remote. Use the navigation arrows until the desired brightness is achieved, then press the SELECT button to confirm.
Time
Use the navigation arrows until appears onscreen.
Push the SELECT button. Select the month by using the navigation arrows, and press SELECT to confirm. Do this again to select the day, hour format, hour, and minute. To confirm, press the SELECT button.
Alarm
Use the navigation arrows until appears onscreen.
Push the SELECT button on the remote. Select the hour by using the navigation arrows, and press SELECT to confirm. Do this again to select the minute. Then select the Alarm Source, using the navigation arrows to cycle through FM, FM Presets, DAB, DAB Presets, and Bluetooth – then press SELECT to confirm. Use the navigation arrows to cycle through the frequency: Once or Daily, then press the SELECT button to confirm. Select the desired Alarm Volume using the navigation arrows, then press SELECT to confirm. Finally, use the navigation arrows to Enable or Disable the Alarm, and push SELECT to confirm.

Sleep
Use the navigation arrows until appears onscreen. Push the SELECT on the remote. Use the navigation arrows to select the desired length of time, then push  SELECT to confirm. Sleep time cycles between Off, 15min, 30min, 45min, 60min, and 90min.
Auto Standby
Use the navigation arrows until appears onscreen. Push SELECT on the remote. Use the navigation arrows to Enable or Disable, then press SELECT to confirm.
This allows your Model One+ to shut itself off if it is idle for a period of time. “Enable” will set your Model One+ to turn off after it is idle for a period of time. “Disable” will turn this feature off and your unit will always stay on until you manually power it off.
Software Version
Use the navigation arrows until appears onscreen. Push SELECT on the remote to view the current Software Version.
Factory Reset
Use the navigation arrows until appears onscreen. Push SELECT on the remote. Use the navigation arrows until the confirmation appears, then press the SELECT button to confirm. A Factory Reset will restore all features on Model One+ to their default settings.
Auto Time Enable
In FM or DAB Mode, press the on the remote, then use the navigation arrows until appears onscreen. Push the Select button. To allow your Model One+ to update the time via FM, or DAB, set it to “Enable”. Selecting “Disable” will require you to manually set the time.
Preset Store
In FM or DAB Mode, press the on the remote, then use the navigation arrows until appears onscreen. Push the Select button. Use the navigation arrows to view the Presets, and press the SELECT button to tune in to the desired preset.
Scan Setting
In FM Mode, press the on the remote, then use the navigation arrows until