Tetra TET-273061 Tetronic LED Connect Complete Set Instruction Manual

: June 6, 2024
: Tetra

TET-273061 Tetronic LED Connect Complete Set

Tetronic LED Connect Complete Set 580/780/980

Instruction manual

For more information: www.tetra.net

tetronic setup max setup setup
diagram box setup

WARNING

This device is suitable for use by children aged 8 and over as well as people with reduced physical, sensory or mental capacities or a lack of experience and knowledge if they are supervised or have been instructed how to safely use the device and understand the resultant risks. Children must not play with the device. Children must not conduct cleaning or user maintenance activities without supervision.

FOREWORD

Thank you for choosing a quality product from Tetra. For further useful information and services in relation to your product and Tetra’s fascinating underwater worlds, please visit our website: www.tetra.net.

ABOUT THIS MANUAL

Read and store the manual This manual contains information about the safe use of Tetronic LED Connect. Please read the manual prior to using the device. The manual goes with the device and must be stored for future reference.

SAFETY INSTRUCTIONS

Prevention of electric shocks

Before connecting the plug to the mains, check that all housings and connection cables are intact. Modifications are not permitted.
Only connect the plug to a professionally installed plug socket. The socket must be freely accessible so that the device can be quickly disconnected from the mains in an emergency by pulling out the plug.
Disconnect the plug from the mains immediately if parts of the housing or the connection cables are damaged.
All components, particularly the electrical connections, should be protected from moisture.
Do not open any of the housings. Do not alter any of the components.
The external flexible cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
The external flexible cord of the power supply cannot be replaced; if the cord is damaged, the power supply shall be destroyed.

Avoid any personal injury.

Do not allow children to play with the packaging materials.

There is a risk of choking.

Ensure the connection cable does not pose a trip hazard.
Glass breakage results in a risk of cuts.

Wear protective gloves when removing shards of glass.

The luminaire’s strobe effects may cause epileptic seizures in susceptible individuals.

Preventing material damage

Do not bend or crush the connection cable.
Only ever pull on the plugs, not the connection cables.
Only use the luminaire with the power supply provided or a replacement power supply from Tetra.
Only use original spare parts and accessories.

Note the symbols on the devices

IP67

|

The LED luminaire is waterproof and dustproof.

---|---
|

Do not dispose of the device with household waste; send for recycling.

|

Protection class II: Metal parts which can lead to voltage failure are insulated.

|

Protection class III: Operation with low voltage, which is generated via a safety transformer.

|

A minimum distance of 15 mm must be maintained between the water and the LED luminaire.

|

Intended for indoor use only.

PRODUCT BASICS

Tetronic LED Connect is a smart LED luminaire that can be configured and operated using a smartphone or tablet. You can control the luminaire from anywhere in the world using the cloud connection. The LED luminaire can be used with a wide variety of aquariums and terrariums as it is available in various lengths and is supplied with continuously adjustable extension arms and various adapters.

Intended use Only use the Tetronic LED Connect 580/780/980

as lighting for an aquarium or terrarium,
in indoor areas,
for private use,
in line with the technical data.

Overview

Items included in the set → Fig. A

1

|

LED light

2

|

Extension arm : allows the length of the luminaire to be continuously adjusted to fit various attachment spans.

3

|

Cover plate : for covering the luminaire’s ends if extension arms are not used.

4

|

Control box : for connecting up to two LED lights and controlling them via the Tetra app.

5

|

power supply

6

|

Mains cable

7

|

Multi-adapter : for fitting the luminaire to the edge of the aquarium or screwing the luminaire onto the aquarium lid.

8th

|

T5 adapter : for installing the luminaire in T5 fluorescent tube brackets (fluorescent tube diameter 16 mm).

9

|

T8 adapter : for installing the luminaire in T8 fluorescent tube brackets (fluorescent tube diameter 26 mm).

The following accessories are available from retailers:

Accessories → Fig. A

Tetronic LED Connect Single Light 580/780/980 : extension luminaire

Tetronic arms : mounting arms providing an alternative means of attaching the LED luminaire.

INSTALLATION AND CONNECTION

GRADE

To ensure that the fixture is secure, each extension arm should extend no further than 12.5 cm from the end of the LED luminaire.

Installation options

The adapters provided enable the LED luminaire to be attached in the following ways: · Placing the LED luminaire on the edge of the aquarium
Both multi-adapters included in the set are required for this option.

Prerequisite: Aquarium edge thickness = 4-10 mm
Procedure: Fig. B · Placing the LED luminaire in the T5/T8 bracket for fluorescent tubes For this option you will need: both T5 or T8 adapters supplied with the set. both original union nuts with seals for the T5 or T8 brackets.
Procedure: Fig. C · Screwing the LED luminaire to the aquarium lid For this option you will need: both multi-adapters supplied with the set. 6 suitable screws. Please note that special fastening materials may be required depending on the condition of the installation site. Please enquire about this in a specialist store.
Procedure: Fig. D · Installing the LED luminaire on Tetronic LED arms The Tetronic arms bracket is available as an accessory for aquariums or terrariums without a lid.
Procedure: Fig. E or F Connecting the LED luminaire
Procedure: Fig. G Please note: · The LED luminaire connector must be positioned correctly to ensure it fits onto sockets P1 and P2. · The union nut on the LED luminaire connector must always be screwed on by hand to ensure safe contact and compliance with the protection rating specified in the technical data.

OPERATION

Operating and display components

|

Reset button (a): to be pressed using eg a paper clip that has been bent open.
Press for 5 seconds: activates pairing mode – the luminaire waits to be connected to a smartphone/tablet. The LED (b) flashes blue.
Press for 10 seconds: resets to factory settings.

---|---

Status LED (b)
Flashing blue: Control box waiting to be connected to a smartphone/tablet (pairing mode).
Flashing green: Control box initializing or transmitting/receiving commands.
Continuous green light: Connected to the app.

Installing the app

The LED luminaire is controlled by smartphone or tablet using the “Tetra Aquatics” app, which you can get free of charge from the App Store (iOS) or Play Store (Android).

Launching the app for the first time

When you launch the “Tetra Aquatics” app for the first time, you will be asked to register with Tetra (if you have not already done so). You will need to provide a user name and password. You can then use these details to log in.

Pairing the app with the LED luminaire

The pairing procedure is described below. Further relevant information, particularly with regard to app components, can be found in the “App screens” section.
Procedure:

If the status LED on the control box is not flashing blue (Operating and display components), you must first set the control box to pairing mode. To achieve this, press the reset button next to the status LED for approx. 5 seconds using e.g. a paper clip that has been bent open. The LED should be flashing blue.
Launch the “Tetra Aquatics” app, log in with your user name and password, and select “My Aquarium”.
Add a new aquarium or select an existing one. Accept the prompt asking whether the app can access your location.
Click on the Wi-Fi symbol on the “My Aquarium” screen.
Select your home Wi-Fi network and enter the appropriate Wi-Fi password.
Notes: The LED luminaire can only be integrated in a Wi-Fi network in the 2.4 GHz frequency band and not the 5 GHz frequency band. Where necessary, configure your Wi-Fi router accordingly.
Select a time zone.
Only necessary for iOS: Switch to smartphone settings and select the following Wi-Fi network: “SPB_Light …” Wi-Fi password “FishAreFun”
For information: This is the ad hoc Wi-Fi network for the LED luminaire, which is only required for iOS and only for pairing. Once pairing is successfully completed, the app automatically switches to your home Wi-Fi network.
Ensure that GPS is enabled on your smartphone.
Add a new device in the app: Click on the Devices + symbol. Select the new device “Tetra Tetronic LED …” Click on “add”. The device is then configured. This may take some time. You can now begin programming your device.

App screens

The app is constantly being developed. Therefore the screens on your device may look different to those shown below. Your smartphone or tablet’s language settings are automatically applied to the user interface. It defaults to English if no language is set.

|

Standard screen functions

(1) : Go back to the previous screen.
(2) : Open menu (3D aquariums, contact, retailer search, etc.).

---|---

|

“My Aquarium” main screen
This screen appears when you select “My Aquarium”. It shows all the aquariums that you have added.
(1) : Add a new aquarium.
(2) : Aquarium name
(3) : Edit aquarium name.
(4) : Wi-Fi icon – switches to the aquarium screen.

|

Aquarium screen
This screen shows the aquarium’s settings and a list of all associated devices.
(1) : Time zone
(2) : Network (Wi-Fi)
(3) : Add a new device.
(4) : Added device
(5) : This symbol is displayed if new firmware is available. Touch this icon to install new firmware. (6) : Program device – switches to schedule screen.

---|---

|

Schedule screen
This screen shows the schedule programmed for the associated device.(1) : Programmed schedule – examples: (a): Every Monday to Sunday, the “sunrise” scenario begins at 8:00 and the sunset scenario begins at 22:00. (b): On Tuesday, thunder and lightning is scheduled for just after 12:00.
(2) : Switches to the scenario selection screen.
(3) : Remove device. The device is removed from the app. Its programming is permanently lost!

|

Scenario selection screen

This screen allows you to select the scenario you wish to edit.
(1) : Select scenario – selects the appropriate scenario settings screen.
(2) : Switches to the schedule screen.

---|---

Scenario settings

|

Scenario settings screen (e.g. “sunrise”)

You can enter scenario-specific settings on this screen.
(1) : Enable or disable a scenario. An enabled scenario is displayed in the schedule screen.
(2) : Enter settings.
(3) : Launch the scenario manually. The luminaire runs the scenario.
(4) : Enter the schedule for this scenario.
(5) : Finish programming – switch to the schedule screen
(6) : Save schedule.

MAINTENANCE

WARNING

Before performing any work on the device, remove the plug from the socket to prevent a harmful electric shock. Please note:

Conduct a visual inspection before performing any work on the device. Remove any deposits and waste.
Only use a damp cloth to clean any components. Do not use cleaning agents or solutions.
The light source of the luminaire is not replicable; when the
light source reaches its end of life the whole luminaire shall be replaced.

TECHNICAL SPECIFICATIONS

LED light

|

580

|

780

|

980

|

---|---|---|---|---

Connection voltage

|

24

|

Vdc

Max. power consumption

|

19

|

25

|

33

|

W

Standby power consumption

|

0.5

|

W

Energy efficiency class (from 09/21)

|

f

|

Number of

LEDs

|

White

|

88

|

112

|

138

|

Piece

Blue

|

20

|

28

|

36

|

Piece

editor

|

10

|

14

|

16

|

Piece

Max. brightness

|

1,350

|

1,720

|

2,230

|

lm

Color temperature (with all white and red LEDs activated)

|

6,000

|

K

Dispersion angle

|

120

|

°

Service life

|

15,000

|

H

T5 or T8 adapter for fluorescent tube length

|

656 –

894

|

856 –

1,094

|

1056 –

1,294

|

mm

Multi adapter for aquarium width

|

596 –

834

|

796 –

1,034

|

996 –

1,234

|

mm

Protection rating

|

IP67

|

Dimension

(without

extension arm)

|

Lenght

|

580

|

780

|

980

|

mm

Width

|

55

|

mm

Height

|

30

|

mm

Cable length

|

1.8

|

m

weight

|

1.4

|

1.7

|

2.0

|

kg

control box

|

---|---|---

input

|

Voltage

|

24

|

Vdc

Max current

|

5

|

A

Output P1

|

Voltage

|

24

|

Vdc

Max current

|

2

|

A

Output P2

|

Voltage

|

24

|

Vdc

Max current

|

2

|

A

WiFi network

|

Protocol

|

IEEE 802.11b/g/n

|

frequencies

tape

|

2.4GHZ

|

transmission power

|

100mW / EIRP

|

Security

|

WEP, WPA, WPA2

|

DHCP

|

Auto

|

Protection rating

|

IPX0

|

Dimensions (L×W×H)

|

150×65×30

|

mm

weight

|

0.13

|

kg

power supply

|

580/780

|

980

|

---|---|---|---

input

|

Voltage

|

100-240

|

Vac

frequencies

|

50/60

|

Hz

output

|

Voltage

|

24

|

Vdc

Max current

|

2.5

|

5.0

|

A

DC connector

|

5.5/2.1

|

mm

protection class

|

II

|

Protection rating

|

IP20

|

Dimension

|

Lenght

|

115

|

151

|

mm

Width

|

50

|

60

|

mm

Height

|

31

|

36

|

mm

Cable length

|

mains

|

1.5

|

1.5

|

m

control box

|

1.5

|

1.5

|

m

weight

|

0.22

|

0.43

|

kg

DISPOSAL

The device contains electronic components and cannot be disposed of with the standard household waste.

Dispose of the device using the return system for your area so that the raw materials can be recycled.
Cut off the connection cable prior to disposal to prevent the device from being used.

WARRANTY

Thanks to state-of-the-art production technology, premiumquality components and stringent quality controls, the Tetronic LED Connect 580/780/980 comes with a two-year warranty from the purchase date. Please save your receipt. The warranty shall not apply in the event of improper handling, standard wear and tear, failure of up to 4% of the LEDs or interference with the device technology. Your statutory warranty claims remain unaffected. In the event of complaint, please contact your retailer or Tetra: www.tetra.net