LACIE KWN2OD9KSG Rugged USB-C Portable Hard Drive User Manual

LACIE KWN2OD9KSG Rugged USB-C Portable Hard Drive

Introduction

Welcome to the user manual for LaCie Rugged USB-C. The most portable of LaCie’s field-tested Rugged hard drive range, Rugged USB-C gives you USB 3.1 Gen 1 transfer rates. Additionally, Rugged USB-C’s casing is small and lightweight for easy travel and it withstands bumps and drops of up to 1.2 meters. Professionals and enthusiasts can appreciate LaCie Rugged USB-C’s durability while enjoying high-end performance when connected to a computer with a USB 3.1 Gen 1 port.
For common questions and answers about your hard drive, see Frequently Asked Questions or visit LaCie, customer, support LaCie customer support.

Box content

• LaCie Rugged USB-C
• USB 3.1 Gen 2 (USB-C) cable

Minimum system requirements
Ports
Use the included cable to connect your LaCie device to a computer with a USB-C port.

Operating system
Go to Operating System Requirements for Seagate Hardware & Software.

Minimum free disk space
600MB recommended.

Cables and Connectors

USB is a serial input/output technology for connecting peripheral devices to a computer. USB-C is the latest implementation of this standard and it provides higher bandwidth and new power management features. USB-C supports many protocols:

• Thunderbolt 3: transfer rates up to 40Gb/s
• USB 3.1 Gen 2: transfer rates up to 10Gb/s
• USB 3.1 Gen 1: transfer rates up to 5Gb/s
• SuperSpeed USB 3.0: transfer rates up to 5Gb/s
• Hi-Speed USB 2.0: transfer rates up to 480Mb/s

The USB-C port on the LaCie Rugged USB-C is USB 3.1 Gen 1. You can connect Rugged USB-C to any USB-C port on your computer.

USB 3.1 (USB-C) cable

Use the USB-C cable to ensure maximum data transfer rates with compatible ports. Connecting your product is easy since the USB-C cable is identical on both ends. Further, the USB-C ports on your LaCie hard drive and computer are conveniently rounded to accept the cable end no matter how it is connected.

Getting Connected

Follow the setup steps in the order they are given to ensure that your LaCie hard drive’s volume mounts correctly on your computer.

STEP 1 – Connect the USB cable
Connect the cable to the USB-C port on LaCie Rugged USB-C and a USB port on your computer.

STEP 2 – LaCie Setup Assistant
LaCie Setup Assistant must be launched before using your drive. It will allow you to:

• Easily format the hard drive according to your needs.
• Register your LaCie device.
• Copy the user manual to the hard drive.
• Install software for added features.

Important info: If you do not launch LaCie Setup Assistant or if you quit LaCie Setup Assistant after the formatting has begun, your drive will not be ready to use and will require manual formatting. Additionally, the user manual and utilities will not be available and must be downloaded from the LaCie customer support.

Launch LaCie Setup Assistant – Mac
Open the LACIE SETUP volume on your desktop and then double click LaCie Setup.

Launch LaCie Setup Assistant – Windows
AutoPlay: Windows AutoPlay may detect your LaCie hard drive as soon as it is connected to your computer. If the AutoPlay window appears, choose Open folder to view files using Windows Explorer and double-click LaCie Setup.

Manual access: open the LACIE SETUP volume in a Windows Explorer window and double-click LaCie Setup.

LaCie Setup Assistant steps

Follow the steps below to format your LaCie device for your operating system. LaCie Setup Assistant guides you through formatting and registering your hard drive as well as installing LaCie software utilities.You can also use your system’s native disk utility program to format or partition your LaCie drive. If you use the disk utility, you can download software utilities and the user manual from LaCie customer support.

Important info for Mac users: You may be prompted to enter your computer password to continue with LaCie Setup Assistant.

Important info for Windows users: While running LaCie Setup Assistant, generic pop-up windows may ask if you wish to change your computer’s settings. This is a normal request when formatting a hard drive or installing software. To successfully complete LaCie Setup Assistant, please agree to change the settings.

• Select your language.

• Read the license agreement before choosing Next. Selecting Next confirms that you accept the license agreement.

• Use the slider to partition your LaCie hard drive. There are two options for partitions:

  • LaCie Share: formatted as FAT32 for compatibility with Windows and Mac.
  • LaCie: formatted for your operating system, NTFS for Windows or HFS+ for Mac.
    Move the slider to the left to reduce the size of the LaCie Share partition. If you do not want the LaCie Share volume, move the slider all the way to the left.

• A prompt alerts you that the disk will be formatted. Select Yes to continue. LaCie Setup Assistant formats the hard drive.

• Register your LaCie device.

• Choose the software utilities that you want to install. Certain software utilities may begin to install before LaCie Setup Assistant has finished. Follow the software utility installer before completing LaCie Setup Assistant. If you do not install software utilities during this step, you can return to LaCie Setup Assistant at any time.

• LaCie Setup Assistant provides a summary of the installation. Choose Finish to close the program.

To install software utilities after the initial installation, you can run LaCie Setup Assistant again. Since the format is complete you are only prompted to choose software utilities. LaCie Setup Assistant is available on:

• LaCie Share: if you created two partitions
• LaCie: if you created one partition

Works with iPad USB-C

Your LaCie storage devices can be used with higher-end iPads. This is a great option for moving files between computers, cloud services and external storage. The iPad is also a perfect mobile editing station for importing media to more advanced imaging and video apps.
See External Storage and iPadOS for details on the following:

• Connecting Storage to Compatible iPads
• Available Actions
• Selecting Multiple Items
• Accessing Storage Devices in an App
• Supported External Storage Devices and USB Hubs
• External Storage Performance on iPad Versus a Computer
• Thunderbolt Storage Devices
• Battery Use
• Ejecting
• Storage Formats
• Password Protection
• Toolkit and First Use Connections

Optional Formatting and Partitioning

You can use LaCie Setup Assistant to format your LaCie hard drive when it is first connected to a computer
(Mac or Windows). LaCie Setup Assistant helps you to quickly format the storage device according to your
needs.
Read the information below if you:

• Aborted LaCie Setup Assistant while it was formatting.
• Want to reformat your storage device after successfully formatting the hard drive with LaCie Setup Assistant

About file system formats
NTFS: since it is the native file system for Windows, volumes created in NTFS are read and written with computers running Windows. Mac OS can read NTFS volumes but cannot natively write to them.
Mac OS Extended (HFS+): the native hard drive file system for Mac. Windows cannot natively read or write to HFS+ (journaled) hard drives.
exFAT: generally compatible with Mac and Windows. exFAT is not a journaled file system which means it can be more susceptible to data corruption when errors occur or the drive is not disconnected properly from the computer.
FAT32: compatible with Mac and Windows. However, FAT32 is a legacy file system designed for low-capacity hard drives and it is not recommended for modern hard drives or operating systems. A FAT32 partition can reach up to 32GB when formatted on a Windows PC.

How to choose the file system format
Use NTFS if:

• the storage device is connected to Windows PCs.

Use HFS+ if:

• the storage device is connected to Macs.

You can use exFAT if:

• the storage device is shared between Mac and Windows computers.

Use FAT32 if:

• the storage device is connected to older Windows and Mac computers. FAT32 is not recommended for modern operating systems and computers.

Formatting instructions

The steps below help you format and partition a storage device.

Caution: Formatting erases everything on the storage device. LaCie highly recommends that you back up all data on your storage device before performing the steps below. LaCie is not responsible for any data lost due to formatting, partitioning or using a LaCie storage device.

Note: Refer to your operating system’s documentation for more information on formatting and partitioning storage devices.

Windows

• Make sure the storage device is connected to and mounted on the computer.
• Go to Search and then type diskmgmt.msc. In the search results, double click Disk Management.
•  From the list of storage devices in the middle of the Disk Management window, locate your LaCie device.
• The partition must be available to format. If it is currently formatted, right click on the partion and then choose Delete.
• To create a new partition, right click on the volume and select New Simple Volume. Follow the on-screen instructions when the New Simple Volume Wizard appears.

Mac

•  Make sure the storage device is connected to and mounted on the computer.
• Select Go > Utilities in the Finder menu bar.
•  In the Utilities folder, double-click Disk Utility. All connected storage devices, partitions or disk images are displayed in the left column.
• Select the LaCie hard drive in the left column.
• Click the Erase tab.
• Choose a format from the drop-down window.
• Enter a name for the volume.
• Click Erase and confirm your selection in the pop-up window.

Safely Remove Rugged USB-C From Your Computer

Always eject a storage drive from your computer before physically disconnecting it. Your computer must perform filing and housekeeping operations on the drive before it is removed. Therefore, if you unplug the drive without using the operating system’s software, your files can become corrupt or damaged.

Mac
There are several ways you can eject your hard drive from a Mac. See below for two options.

Eject via Finder window

• Open a Finder window.
•  On the sidebar, go to Devices to locate LaCie and click the eject symbol to the right of the drive name.
• Once the hard drive disappears fro from the sidebar or, the Finder window closes, you can disconnect the hard drive’s cable from your Mac.

Eject via Desktop

•  Select the desktop icon for your hard drive and drag it to the Trash.
• When the hard drive’s icon is no longer visible on your desktop, you can physically disconnect the hard drive from your Mac.

Windows
Use the Safely Remove tool to eject a hard drive.

• Click the Safely Remove icon in your Windows System Tray to view the devices you can eject.
  • Windows 7:
  • Windows 8 / Windows 10:
• If you don’t see the Safely Remove Hardware icon, click the Show hidden icons arrow in the system tray to display all icons in the notification area.
• In the list of devices, choose the device you want to remove. Windows displays a notification when it is safe to remove the device.
• Disconnect the hard drive from the computer.

Frequently asked question

For help setting up and using your LaCie hard drive, review the frequently asked questions below. For additional support resources, go to LaCie customer support.

All users
Problem: My file transfers are too slow.
Q: Are both ends of the USB cable firmly attached?
A: Review troubleshooting tips for cable connections below:

• Check both ends of the USB cable and make sure that they are fully seated in their respective ports.
• Try disconnecting the cable, waiting 10 seconds, and then reconnecting it.
• Try a different USB cable.

Q: Are there other USB devices connected to the same port or hub?
A: Disconnect other USB devices and see if the hard drive’s performance improves.

Problem: I have an older computer with USB 3.0 (Type A) ports.
Q: Will my storage device’s USB 3.1 Gen 2 port work with my computer’s USB 3.0 port?
A: Yes, the device is compatible with USB 3.0 ports, however, the product does not include a cable with a
USB Type A connector. Transfer rates are much slower with USB 3.0.

Problem: I must use a USB hub for my USB devices.
Q: Can I use my hard drive with a USB hub?
A: Yes, the hard drive can be connected to a USB hub. If you use a hub and encounter detection problems, slower than normal transfer rates, random disconnection from your computer or other unusual issues, try connecting the hard drive directly to the computer’s USB port.
Some USB hubs are less than efficient with power management, which can be problematic for connected devices. In such a case, consider trying a powered USB hub that includes a power cable.

Problem: The provided USB cables are too short.
Q: Can I use my hard drive with a longer cable?
A: Yes, provided it is certified according to USB standards. However, LaCie recommends using the cable shipped with your hard drive for the best results. If you use a longer cable and experience problems with detection, transfer rates or disconnection, use the original cable included with your hard drive.

Problem: I must password protect and/or encrypt my hard drive
Q: Can I protect my hard drive with a password?
A: Yes, it is possible to protect the hard drive or individual folders and files with a password. There are many third-party solutions for password protection. However, LaCie cannot guarantee them since we do not test third- party applications.

Some versions of Windows have a built-in utility called Bitlocker that can protect hard drives with a password. For more information about Bitlocker, consult Microsoft’s support documentation.

Q: Can I encrypt my hard drive?
A: Yes, the hard drive can be encrypted. There are many third-party solutions for encryption. However, LaCie cannot guarantee them since we do not test third-party applications.

Some versions of Windows have a built-in utility called Bitlocker that can encrypt hard drives. For more information about Bitlocker, consult Microsoft’s support documentation

Problem: I’m receiving file transfer error messages.
Q: Did you get an “Error -50” message while copying to a FAT32 volume?
A: When copying files or folders from a computer to a FAT32 volume, certain characters in the names cannot be copied. These characters include, but are not limited to: ? < > / \ : Check your files and folders to ensure that these characters are not in the names. If this is a recurring problem or you cannot find files with incompatible characters, consider reformatting the drive to NTFS (Windows users) or HFS+ (Mac users). See Optional Formatting and Partitioning.

Q: Did you get an error message telling you that the drive has been disconnected when coming out of sleep mode?
A: Ignore this message since the drive remounts on the desktop despite the pop-up. LaCie drives conserve power by spinning down when you set your computer to sleep mode. When the computer awakes from sleep mode, the drive may not have enough time to spin up, causing the pop-up to appear.

Mac
Problem: The hard drive icon does not appear on my desktop.

Q: Is your Finder configured to hide hard drives on the desktop?
A: Go to Finder and then check Preferences > General tab > Show these items on the desktop. Confirm that Hard Disks is selected.

Q: Is your hard drive mounting in the operating system?
A: Open Disk Utility at Go > Utilities > Disk Utility. If the hard drive is listed in the left-hand column, check your Finder preferences to see why it is not displayed on the desktop (review the question above).

Q: Does your computer’s configuration meet the minimum system requirements for use with this hard drive?
A: Refer to the product packaging for the list of supported operating systems.

Q: Did you follow the correct installation steps for your operating system?
A: Review the installation steps in Getting Connected.

Windows

Problem: The hard drive icon doesn’t appear in Computer.
Q: Is the hard drive listed in Device Manager?
A: All drives appear in at least one place in Device Manager.

Go to type Device Manager and then launch it. Look in the Disk Drives section and, if necessary, click the plus sign to view the full list of devices. If you’re uncertain that your drive is listed, safely unplug it and then reconnect it. The entry that changes is your LaCie hard drive.

Q: Is your hard drive listed next to an unusual icon?
A: Windows Device Manager usually provides information about failures with peripherals. While the Device Manager can assist with troubleshooting most problems, it may not display the exact cause or provide a precise solution.
An unusual icon next to the hard drive can reveal a problem. For example, instead of the normal icon based on the type of device, it has an exclamation point, question mark or an X. Right click this icon and then choose Properties. The General tab provides a potential reason why the device is not working as expected.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>