LACIE STLR5000400 Mobile Drive User Manual
- October 30, 2023
- LaCie
Table of Contents
- Introduction
- Getting Started
- Use Toolkit to Set Up Backups and More
- Safely Remove Device From Your Computer
- Optional Formatting
- Works with iPad USB-C
- Frequently Asked Questions
- Q: Did you follow the correct installation steps for your operating system?
- Regulatory Compliance
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
LaCie Mobile Drive
User Manual
Click here to access an up-to-date online version of this document. You will also find the most recent content as well as expandable illustrations, easier navigation, and search capability.
Introduction
For common questions and answers about your hard drive, see Frequently Asked
Questions or visit LaCie customer support.
Box content
- LaCie Mobile Drive Secure
- USB-C cable
- Quick start guide
Minimum System Requirements
Ports
Use the included cable to connect your LaCie device to a computer with a USB-C
port.
operating system
Go to Operating System Requirements for Seagate Hardware & Software.
Minimum free disk space
600 MB recommended.
Getting Started
Connect the USB cable
Use the USB-C cable to connect LaCie Mobile Drive to a computer’s USB-C
port. Set up
LaCie Mobile Drive Secure
The setup process lets you:
Register your LaCie Mobile Drive Secure| Get the most from your drive with
easy access to information and support.
---|---
Install Toolkit| Manage security, mirror folders, backup plans (Windows only)
and more.
Your computer must be connected to the internet to register your device and install Toolkit.
Start here
Using a file manager such as Finder or File Explorer, open LaCie Mobile Drive
Secure and launch Start Here Win or Start Here Mac. If your drive no longer has a Start
Here icon, you can register your device on lacie.com. Toolkit can be
downloaded from the Toolkit support page.
Register your device Enter your information and click Register.
Download Toolkit Click the Download button.
Install Toolkit
Using a file manager such as Finder or File Explorer, go to the folder where
you receive downloads.
Open the LaCieToolkit.zip file. Click on the LaCie Toolkit Installer to launch
the application.
Click on the LaCieToolkit.exe file to launch the application.
Use Toolkit to Set Up Backups and More
Toolkit provides useful tools that let you easily create and manage mirror
folders, backup plans and more.
Start a backup plan (Windows only)
Create a plan customised for the content, storage device, and schedule of your
choosing.
- Click here for details on setting up a backup plan.
Create mirror folders
Create a mirror folder on your PC or Mac that is synced to your storage
device. Whenever you add, edit, or delete files in one folder, Toolkit
automatically updates the other mirror folder with your changes.
- Click here for details on creating a mirror folder.
Safely Remove Device From Your Computer
Always eject a storage drive from your computer before physically
disconnecting it. Your computer must perform filing and housekeeping
operations on the drive before it is removed. Therefore, if you unplug the
drive without using the operating system’s software, your files can become
corrupt or damaged.
Windows
Use the Safely Remove tool to eject a device.
- Click the Safely Remove Hardware icon in your Windows System Tray to view the devices you can eject.
- If you don’t see the Safely Remove Hardware icon, click the Show hidden icons arrow in the system tray to display all icons in the notification area.
- In the list of devices, choose the device you want to eject. Windows displays a notification when it is safe to remove the device.
- Disconnect the device from the computer.
Mac
There are several ways you can eject your device from a Mac. See below for two
options.
Eject via Finder window
- Open a Finder window.
- On the sidebar, go to Devices and locate the drive you want to eject. Click the eject symbol to the right of the drive name.
- Once the device disappears from the sidebar or, the Finder window closes, you can disconnect the interface cable from your Mac.
Eject via Desktop
- Select the desktop icon for your device and drag it to the Trash.
- When the device icon is no longer visible on your desktop, you can physically disconnect the device from your Mac.
Optional Formatting
Your device is preformatted exFAT (Extended File Allocation Table) for
compatibility with both Mac and Windows computers.
Choosing a file system format
When choosing a file system format, consider whether compatibility or
performance is more important in your everyday use of the drive.
Compatibility—You need a cross-platform format because you connect your drive
to both PCs and Macs.
Performance—You connect your drive with only one type of computer, so you can
optimize file copy performance by formatting the drive in the native file
system for your computer operating system.
Compatibility with both Windows and Macs
exFAT is a lightweight file system compatible with all versions of Windows and
modern versions of macOS.
If you use your drive with both PCs and Macs, format your drive in exFAT.
While exFAT offers crossplatform access to both computers, keep in mind the
following:
exFAT is not compatible or recommended for built-in backup utilities such as
File History (Windows) and Time Machine (macOS). If you want to use one of
these backup utilities, you should format the drive in the native file system
for the computer running the utility.
exFAT is not a journaled file system, which means it can be more susceptible
to data corruption when errors occur or the drive is not disconnected properly
from the computer.
Optimized performance for Windows
NTFS (New Technology File System) is a proprietary journaling file system for
Windows. macOS can read NTFS volumes, but it can’t natively write to them.
This means your Mac can copy files from an NTFSformatted drive, but it can’t
add files to or remove files
from the drive. If you need more versatility than this one-way transfer with
Macs, consider exFAT.
Optimized performance for macOS
Apple offers two proprietary file systems.
Mac OS Extended (also known as Heirarchical File System Plus or HFS+) is an
Apple file system used since 1998 for mechanical and hybrid internal drives.
macOS Sierra (version 10.12) and earlier use HFS+ by default.
APFS (Apple File System) is an Apple file system optimized for solid state
drives (SSDs) and flash-based storage systems, though it also works with hard
disk drives (HDDs). It was first introduced with the release of macOS High
Sierra (version 10.13). APFS can only be read by Macs running High Sierra or
later.
When choosing between Apple file systems, consider the following:
- Windows cannot natively read or write to APFS or HFS+ volumes. If you need cross-platform compatibility, you should format the drive in exFAT.
- If you intend to use your drive with Time Machine:
- The default format for macOS Big Sur (version 11) and later is APFS.
- The default format for macOS Catalina (version 10.15) and earlier is HFS+.
- If you intend to use your drive to move files between Macs running older OS versions, consider formatting your drive in HFS+ rather than APFS.
- macOS file systems and Android: Formatting your drive for macOS may not be supported with connections to Android mobile devices.
Learn more
For additional considerations when choosing a file system format, see File
System Format Comparisions.
Formatting instructions
For instructions on formatting your drive, see Formatage du disque | LaCie
Support France.
Works with iPad USB-C
Your LaCie storage devices can be used with higher-end iPads. This is a great
option for moving files between computers, cloud services and external
storage. The iPad is also a perfect mobile editing station for importing media
to more advanced imaging and video apps.
See External Storage and iPadOS for
details on the following:
- Connecting Storage to Compatible iPads
- Available Actions
- Selecting Multiple Items
- Accessing Storage Devices in an App
- Supported External Storage Devices and USB Hubs
- External Storage Performance on iPad Versus a Computer
- Thunderbolt Storage Devices
- Battery Use
- Ejecting
- Storage Formats
- Password Protection
- Toolkit and First Use Connections
Frequently Asked Questions
For help setting up and using your LaCie hard drive, review the frequently
asked questions below. For additional support resources, go to LaCie customer
support.
All users
Problem: My file transfers are too slow Q: Are both ends of the USB cable firmly attached?
A: Review troubleshooting tips for cable connections below: Check both ends of the USB cable and make sure that they are fully seated in their respective ports. Try disconnecting the cable, waiting 10 seconds, and then reconnecting it. Try a different USB cable.
Q: Are there other USB devices connected to the same port or hub?
A: Disconnect other USB devices and see if the hard drive’s performance improves.
Problem: I have an older computer with USB 3.0 (Type A) ports Q: Will my hard drive’s USB 3.2 Gen 1 port work with my computer’s USB 3.0 port?
A: Yes, the device is compatible with USB 3.0 ports, however, the product does not include a cable with a USB Type A connector.
Problem: I must use a USB hub for my USB devices Q: Can I use my hard drive with a USB hub?
A: Yes, the hard drive can be connected to a USB hub. If you use a hub and encounter detection problems, slower than normal transfer rates, random disconnection from your computer or other unusual issues, try connecting the hard drive directly to the computer’s USB port. Some USB hubs are less than efficient with power management, which can be problematic for connected devices. In such a case, consider trying a powered USB hub that includes a power cable.
Problem: The provided USB cables are too short Q: Can I use my hard drive with a longer cable?
A: Yes, provided it is certified according to USB standards. However, LaCie recommends using the cable shipped with your hard drive for the best results. If you use a longer cable and experience problems with detection, transfer rates or disconnection, use the original cable included with your hard drive.
Problem: I’m receiving file transfer error messages Q: Did you get an “Error -50” message while copying to a FAT32 volume?
A: When copying files or folders from a computer to a FAT32 volume, certain characters in the names cannot be copied. These characters include, but are not limited to: ? / : Check your files and folders to ensure that these characters are not in the names. If this is a recurring problem or you cannot find files with incompatible characters, consider reformatting the drive to NTFS (Windows users) or HFS+ (Mac users). See Optional Formatting and Partitioning.
Q: Did you get an error message telling you that the drive has been disconnected when coming out of sleep mode?
A: Ignore this message since the drive remounts on the desktop despite the pop-up. LaCie drives conserve power by spinning down when you set your computer to sleep mode. When the computer awakes from sleep mode, the drive may not have enough time to spin up, causing the pop-up to appear.
Mac Problem: The hard drive icon does not appear on my desktop Q: Is your Finder configured to hide hard drives on the desktop?
A: Go to Finder and then check Preferences | General tab | Show these items on the desktop. Confirm that Hard Disks is selected.
Q: Is your hard drive mounting in the operating system?
A: Open Disk Utility at Go | Utilities | Disk Utility. If the hard drive is listed in the left-hand column, check your Finder preferences to see why it is not displayed on the desktop (review the question above).
Q: Does your computer’s configuration meet the minimum system requirements for use with this hard drive?
A: Go to the following link for a list of supported operating systems: www.lacie.com/os.
Q: Did you follow the correct installation steps for your operating system?
A: Review the installation steps in Getting Started.
Problem: I want to use Mobile Drive Secure with Time Machine. Q: Can I use Mobile Drive Secure with Time Machine?
Windows Problem: The hard drive icon doesn’t appear in Computer Q: Is the hard drive listed in Device Manager?
A: All drives appear in at least one place in Device Manager. Type Device Manager in Search to launch it. Look in the Disk Drives section and, if necessary, click the Plus (+) icon to view the full list of devices. If you’re uncertain that your drive is listed, safely unplug it and then reconnect it. The entry that changes is your LaCie hard drive.
Q: Is your hard drive listed next to an unusual icon?
A: Windows Device Manager usually provides information about failures with peripherals. While the Device Manager can assist with troubleshooting most problems, it may not display the exact cause or provide a precise solution.
An unusual icon next to the hard drive can reveal a problem. For example, instead of the normal icon based on the type of device, it has an exclamation point, question mark or an X. Right-click this icon and then choose Properties. The General tab provides a potential reason why the device is not working as expected.
Regulatory Compliance
Product Name | LaCie Mobile Drive Secure |
---|---|
Regulatory Model Number | LRD0TUB |
China RoHS 2
China RoHS 2 refers to the Ministry of Industry and Information Technology
Order No. 32, effective July 1, 2016, titled Management Methods for the
Restriction of the Use of Hazardous Substances in Electrical and Electronic
Products. To comply with China RoHS 2, we determined this product’s
Environmental Protection Use Period (EPUP) to be 20 years in accordance with
the Marking for the Restricted Use of Hazardous Substances in Electronic and
Electrical Products, SJT 11364-2014.
Part Name | Hazardous Substances |
---|---|
(Pb) | (Hg) |
HDD | X |
Bridge PCBA | X |
Power Supply (rf provided) | X |
nterface cable (if provided) | X |
Other enclosure components | 0 |
This table is prepared in accordance with the provisions of SJ/T 11364-2014
0:
0: Indicates that the hazardous substance contained in all of the homogeneous
materials for this part is below the limit requirement of GB/T26572.
X
X: Indicates that the hazardous substance contained in at least one of the
homogeneous materials used for this part is above the limit requirement of
GB/T26572.
Taiwan RoHS
Taiwan RoHS refers to the Taiwan Bureau of Standards, Metrology and
Inspection’s (BSMI’s) requirements in standard CNS 15663, Guidance to
reduction of the restricted chemical substances in electrical and electronic
equipment. Beginning on January 1, 2018, Seagate products must comply with the
“Marking of presence” requirements in Section 5 of CNS 15663. This product is
Taiwan RoHS compliant. The following table meets the Section 5 “Marking of
presence” requirements.
4035611:914ZOISEPP2lit: LRDOTUB Product Name: LaCie Mobile Drive Secure, Model: LRDOTUB
Unit| mfflew&Attnat Restricted Substance and its chemical symbol
(Pb)| | (Cd)| (Cr1| (PBB)| (PBDE)
(Hg)
HDD| —| 0| 0| 0| 0| 0
Bridge PCBA| —| 0| 0| 0| 0| 0
MX (MAR Power Supply (if provided)| —| 0| 0| 0| 0| 0
Interface cable (if provided)| —| 0| 0| 0| 0| 0
Other enclosure components| 0| 0| 0| 0| 0| 0
Note 1. “0” indicates that the percentage content of the restricted substance
does not exceed the percentage of reference value of presence.
Note 2. “— ” indicates that the restricted substance corresponds to the
exemption.
References
- LaCie: Premium External Hard Drives, SSDs & RAID Solutions | LaCie US
- Operating System Requirements for LaCie Hardware & Software | LaCie Support US
- Apple Time Machine 101 | LaCie Support US
- Toolkit Support | LaCie Support US
- Create Your LaCie Account
- LaCie Mobile Drive User Manual - Getting Started
- LaCie Mobile Drive Secure User Manual - Frequently Asked Questions
- LaCie Mobile Drive User Manual
- LaCie Rugged RAID Pro - Optional Formatting
- File System Format Comparisons | LaCie Support US
- How to format your drive | LaCie Support US
- Features Supported by LaCie External Drives on iPad USB-C | LaCie Support US
- Toolkit User Manual - Backup Activity (Windows Only)
- Toolkit User Manual - Mirror Activity
- Operating System Requirements for LaCie Hardware & Software | LaCie Support US
- Operating System Requirements for LaCie Hardware & Software | LaCie Support US
- Mobile Drive | LaCie Support US