Yoolonie CGD301 78LED Wireless Under Cabinet Lighting User Manual
- June 6, 2024
- Yoolonie
Table of Contents
CGD301 78LED Wireless Under
Cabinet Lighting
User Manual
Always here to help you
We provide one year warranty, for any questions or help to extend its
warranty, please send an email to
afterservicel@yahoo.com
This cabinet light, with a built-in powerful magnet, makes it simple
installation and easy to replace, you can adjust the light color and
brightness at your demands, and is designed with a motion sensor to sense
within 10ft, setting your fingers free.
The light can be adjusted randomly within 120° angle.
Main Structure
Function Instructions
Mode Choose:
Single press to switch between normal light mode/ day mode/night mode
Light Color:
Single press to switch 2800k/4500k/6000k
Light Brightness :
Single press to switch 50%/70%/100%
Memory Function :
The light will come back to the exact model, color and brightness when it’s
turned off last time.
Motion sensor Function:
- Using the passive infrared technology, auto turn on as soon as you are within 10 feet and stay on as long as you are moving.
- If you walk out of the range for about 20 seconds, it will turn off immediately.
- The very smart and environmentally friendly idea for providing extra light where is no lighting source.
Matters Needing Attention
- The charging voltage of the product is DC SV
- The product is not waterproof. Do not use it in a rain or wet environment.
- Do not install the product at the inlet and outlet of the strong light irradiation or hot and cold gas, so as to avoid affecting sensitivity and generating the wrong action.
Product Parameters
| Material | ABS |
|---|---|
| Size | 10.815.71.7inch |
| Color Temperature | 2800K-4500K-6000K Adjustable |
| Lumen Range | 90-180LM |
| Lamp Beads Parameters | 2835 6000K(white) 2835 2800K(warm light) |
| Number of Lamp Beads | 78pcs (39pcs warm,39pcs white) |
| Power Supply | 21700 battery |
| Battery Capacity | Rechargeable 4500mAh |
| Fully Charged | 8 hours |
| Working Time Per Charge | 9 hours+ (Minimum brightness-19 hours +) |
Usage
- Built-in strong magnetic, this LED light can be adsorbed on any iron product.
- Use double-sided tape to install the iron sheet under the cabinet, and then attach the lamp to the iron sheet.
Package included
| CGD301 | Lamp*1 | Double-sided Adhesion tapes*2 |
|---|---|---|
| Fastening block*1 | Type-C charging cord*1 | |
| Screws*6 | User manual | |
| CGD3012 | Lamp*2 | Double-sided Adhesion tapes*3 |
| Fastening block*2 | Type-C charging cord*2 | |
| Screws*6 | User manual | |
| CGD306 | Lamp*1 | Double-sided Adhesion tapes*2 |
| Fastening block*1 | Type-C charging cord*1 | |
| Screws*6 | User manual |
Product Installation 1
-
Take off one side of the adhesive tape and attach it to the Fastening block;
-
Take off another side of the adhesive tape and attach it to the place where the light is to be installed;
-
Put the light close to the magnetic fastening block, then it can be held on.
Product Installation 2
-
Use a screwdriver to screw the fastening block to the place where the light is to be installed.
Note: screwdriver is not included in the package. You need to buy one.
-
Put the light close to the magnetic fastening block, then it can be held on.
Warranty
To ensure that we meet your needs, we offer a one-year warranty from the
purchase date for defective products. The incorrect human operation, not
limited to disassembling, burning, soaking, and dropping.
For any customer product question or honor your warranty, please write to
afterservicel@yahoo.com. Our usual
response time is within 24 hours.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>