KJB security V01 SGDB Ubox Battery Doorbell Camera User Guide

User Guide

The user guide is for reference only.
Screen shots displayed in this user’s guide of the “UBOX” app may appear differently than those currently featured in your app as frequent updates and improvements.

APP INSTALLATION

http://app.ubianet.com/app/ubox

1. Scan the following QR codes or search for 〝UBox〞from the App Store(for iOS devices) or Google Play Store (for Android smartphones) to download and install the app.

 APP REGISTRATION

1.  Open the app then input your E-mail address then press ‘Register’.
   Check and select to agree on the agreement then your E-mail box will get a verification mail.
   ( For better user experience, please allow to open all permissions to avoid missing any notifications from the app.)

2. Set the login password and confirm the login password.
   Then press ‘Register’ to the next step. (For your password safety, the password requires more than 8 characters plus a combination of letters)

3. We send a verification mail to you,    go to your mailbox click the link to complete the verification.

4. Enter your E-mail address, and password, click log in.
   (APP will auto fill the account infomaion)

WI-FI CONNECTION

1.  Press ‘Add Family’ then set the room or position as per reminders. ****
2. Enter your family name and then press ‘Next’.
3. Input the necessary information just like Country, Province, then press ‘Done’.
4. Press ‘Add a device’ to add a smart device
5. Connect the device with a power supply, and make sure your mobile phone is connected to an available Wi-Fi. Then press ‘Setup device’.
6. After the power on the device, wait for the device bule LED are blinking This means your device is in pairing mode
7. If the device blue is not blinking, please press the power/Call key to wake up the device first, then hold and press the RESET button until the blue indicator lights up and then releases. The device will reboot and enter the pairing state.
8. Set the device name and select the device location before setup,
9. The app will input the Wi-Fi name automatically, please input the correct Wi-Fi password. Then you can choose the ‘QR code configuration’ or ‘Sound wave configuration’
10. QR code configuration: Select the QR code configuration then the mobile phone display a QR code. Use the device to scan to the QR code 10cm away from the mobile phone.
11. The device will enter to the device list automatically. Setup success! The device is ready to use.
12. Notes about PIR detection

• Users can change the PIR detection sensitivity in device settings. we recommend setting sensitivity at “Disabled” or “Low” to reduce flase alert and save the battery power in noisy environments.
• Disabled: disabled PIR detection.
• Low: delay 7 seconds PIR detects a moving.
• Medium: delay 5 seconds PIR detects a moving.
• High: delay 1 second PIR detects a moving.

 USING THE APP

Click the 〝Calendar〞icon on the right top corner, then choose the date to playback the videos from cloud storage.

Choose the desired date to check all videos from the cloud.

 SPECIAL NOTES!

1.  The device is equipped with a rechargeable lithium battery. The battery life will be affected by the device wake-up time and the number of wake-ups.
   Therefore, the PIR sensor alarm detection function is used in an environment with a lot of people.
   It is recommended to turn off or set the device to low sensitivity to reduce device wake-up and call times extend battery life.
   When the battery is low, please charge the battery immediately.

2. Keep the device in the range of your router.
   Make sure the device is placed close to the Wi-Fi router. If there have to be thick or insulated objects between the device and the
   Wi-Fi router, which may lead to weak Wi-Fi signal, please make sure the Wi-Fi signal is at a good level before you start using the device.

3. It is a delicate device with a low power consumption design. Every time the device is awakened and will work for a few seconds.
   After that, the device will enter standby mode to save power. You can set the work time in the app settings.

4. Because mainland China does not receive Google’s system push messages, you need to open the app’s self-starting function in your phone to receive push messages.

5. This device provides one month of free cloud storage and faces recognition services. If you need to continue using value-added services after the trial period expires, you need to purchase them in the app.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>