BISSELL 2847 Series air320MAX Smart Air Purifier User Manual

: June 6, 2024
: Bissell

Table of Contents

Important Safety Instructions
IMPORTANT INFORMATION
Warranty
Getting Started
Connecting to the BISSELL Connect App
Cirqulate® System
Replacing the Filters
Cleaning the Particulate Sensors
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Welcome to BISSELL®
air320MAX

Important Safety Instructions

WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:

Use indoors only.
Do not use for any purpose other than described in this user guide. Use only the manufacturer’s recommended accessories.
Do not operate the appliance with a damaged cord or plug. Discard appliance or return to an authorized service facility for examination and/or repair.
Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliances over the cord. Keep cord away from heated surfaces.
Do not run cord under carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Do not route the cord under furniture or appliances. Arrange cord away from the high-traffic area and where it will not be tripped over.
Do not unplug by pulling the cord. To unplug, grasp the plug, not the cord.
Do not handle plug or appliance with wet hands.
Do not put any object into openings. Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce airflow.
Keep hair, loose clothing, and fingers away from openings.

SAVE THESE INSTRUCTIONS THIS MODEL IS FOR HOUSEHOLD USE ONLY.

IMPORTANT INFORMATION

Do not turn ON your appliance until you are familiar with all instructions and operating procedures.
To reduce the risk of electrical shock, turn the power OFF and disconnect the polarized plug from the electrical outlet BEFORE performing maintenance or troubleshooting checks.
Turn OFF device controls before unplugging the appliance.
Do not use appliances in an enclosed space filled with vapors given off by oil-based paint, paint thinner, moth-proofing substances, flammable dust, or other explosive or toxic vapors.
Keep appliance on a level surface.
Do not immerse the appliance in water or other liquids, do not pour liquids into or around the unit or openings.
Do not use the appliance near water or in a damp or wet location.
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
Suitable for use with solid-state speed controls.
WARNING: Plastic bags can be dangerous. To avoid the danger of suffocation, keep this bag away from babies and children.
This product contains a wireless device. Refer to FCC/IC Notice Document for regulatory information.

Warranty

The 5-Year limited warranty may vary by state. Visit support.BISSELL.com or call 1-844-383-2630 for complete warranty information.

Getting Started

Your air purifier comes with two filters sealed in plastic bags. Remove the plastic bags before using your air purifier.

| |
---|---|---
1. Remove the fabric front panel and the two filters.| 2. Remove the filters from the plastic bags.| 3. Reinstall the filters with the tabs facing outward, starting with the carbon filter.
| |
4. Reinstall the fabric front panel.| 5. Press the power button to turn the machine ON. The three-digit number on the front of the display is a real-time reading of your indoor air quality. See page 8 for more information.| 6. Select your fan speed. Your air purifier has 5 different fan speeds ranging from low to high. It also has an auto mode which can be selected by turning the control dial counter-clockwise until the display shows an “A”.

Connecting to the BISSELL Connect App

| |
---|---|---
1. In the App Store search “BISSELL Connect” and download.| 2. Once downloaded, open the app to sign in or create a new login.| 3. Make sure you are near a WiFi router during pairing.
| |
4. Select your product.| 5. Remove the fabric front panel and the two filters inside your air320 Max to access the setup QR code. See page 5 for instructions to remove the filters.| 6. Once you find and scan the QR code, follow the instructions in the app to pair.

Cirqulate® System

When set to Auto Mode, the BISSELL® air320 Max uses its CirQulate® System to provide optimum filtration based on your home’s indoor air quality.
CirQulate uses air320 Max’s PM 2.5 sensor to measure microscopic particles like dust, pollen, and even smoke.
Then, CirQulate’s Digital Air Quality Feedback Display provides both a numerical and colored indication of your home’s indoor air quality in real- time, making your once invisible concerns, visible.

Replacing the Filters

Filter life varies based on run time and existing air conditions. It is recommended to replace both the HEPA and activated carbon filters once every six months. It is also recommended to occasionally vacuum the fabric front panel to remove dust.

| |
---|---|---
1. If your digital display is showing F-1 and/or F-2, this means that either one or both of your filters needs to be replaced.
F-1: HEPA filter
F-2: Carbon filter
F-1 and F-2: Both filters| 2. Replace the filters following steps 1-4 on page 5.| 3. After replacing your filter(s), press and hold down the power button for 3 seconds to reset the filter(s). Once reset, your air320 Max will beep and the F-1 and/or F-2 will no longer show on the digital display.

Note: The source of electrical supply is to be disconnected prior to the beginning of any such servicing or cleaning operation.

Cleaning the Particulate Sensors

For accurate air quality display readings, the sensor and sensor screen should be thoroughly cleaned once every 3 months.

Note: If air320 Max remains at a high air quality reading for a long period of time, please see our ‘Filter and Sensor Maintenance’ video on support.BISSELL.com for more detailed cleaning instructions.

| |
---|---|---
1. Press the tab on the sensor cover and pull it open.| 2. Remove the sensor screen.| 3. Gently clean the screen and the particulate sensor with a cotton swab.
4. Reinstall the sensor screen and cover.

every purchase Saves pets™

We’re Waggin’ Our Tails!
BISSELL® proudly supports BISSELL Pet Foundation® and its mission to help save homeless pets. When you buy a BISSELL product, you help save pets, too. We’re proud to design products that help make pet messes, odors, and pet homelessness disappear. Visit BISSELLsavespets.com to learn more.

Love your BISSELL® product?
Don’t keep it a secret. Let us, and millions of others, know what you think!
Leave your star rating on BISSELL.com.