Nakamichi NSW-Z1002S4 10 Inch SVC Subwoofer User Manual

: June 6, 2024
: Nakamichi

Table of Contents

YOUR SUBWOOFER
COMMON FAULTS & SOLUTIONS
ACCESSORY LIST
SPECIFICATIONS & DIMENSIONS
INSTALLATION
WIRE CONNECTION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

NSW-Z1002S4
User Manual
10 Inch SVC SUBWOOFER

nakamichicaraudio.com
nakamichi.global
nakamichi.caraudio

YOUR SUBWOOFER

Dear Customer,
Congratulations on purchasing our Nakamichi mobile system product for your sound system.
This product has been designed and manufactured to Nokamichi’s exacting standards to ensure many years of audio enjoyment. For the best performance, we recommend that you have your Nakamichi product installed by an authorized Nakamichi dealer. If you would like to install this product on your own, we recommend for you go through this manual to familiarize yourself with all the installation requirements and procedures.
If you encounter any issues or if you have any questions on the operation of this product, please contact your nearest authorized Nakamichi dealer for assistance, or you may also contact us through our website or social media channels.

Installation of your Product

In today’s modern vehicles, it is very easy to cause damage to existing systems through improper installation. Please follow and scrutinize all wiring diagrams to ensure that you have connected everything in its proper place. If you find yourself uncomfortable of unfamiliar with understanding the wiring and installation diagrams or testing instructions, do contact your nearest Nakamichi dealer to perform the installation for you.

Safety Warnings and Considerations

Clean only with a dry cloth or other similar materials.
Install your product in a dry, well-ventilated location that does not interfere with your vehicle’s safety equipment.
Do not block any ventilation openings when installing this product.
Do not mount the product in the engine compartment of your vehicle or in any areas of extreme heat such as mufflers, silencers, exhaust pipes or other heat-producing apparatus.
Securely mount the product so that it does not come loose in the event of a collision or as a result of repeated vibrations that might occur during normal operation.
Installation of the apparatus must be done with great care to prevent damage to your vehicle’s fuel lines, power, and electrical wiring, hydraulic brake lines, and other systems. If possible, always visit your nearest Nakamichi dealer to perform the installation.
Do not run any wiring outside or underneath the vehicle. Keep all wires inside the vehicle.
Do not run any wiring outside or underneath the vehicle. Keep all wires inside the vehicle.
Take the necessary precautions when making connections to the vehicle’s battery to avoid any potential shock.
Protect all system wires from sharp edges by carefully routing them, always use rubber grommets to protect wiring and cables whenever you are installing them through metal openings
Secure all wiring using cable ties or wire clamps to protect them from moving parts and sharp edges.
This apparatus shall not be exposed to dripping or splashing, and no object filled with liquids shall be placed on the apparatus.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power input terminals are damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture. does not operate normally, or has been dropped.
Fuses shall be replaced only with the correct type and fuse value, and only when the apparatus is powered off.
Exposure to high sound pressure levels may lead to permanent hearing loss. Take every precaution to protect your hearing.
This product is designed specifically for use with 12 volts, negative ground electrical systems only. Using this product in systems with the positive ground and/or voltages other than 12V may result in damage to the product and your system.

COMMON FAULTS & SOLUTIONS

Issues	Causes	Solutions
Can’t switch on the unit.	1.No +12V on the remote.
2. Ground not properly connected.	1. Supply the terminal in +12V.

2. Connect the supply in +12V.
3. Check connections to the ground.
4. Change fuse.
No sound.| 1. Broken line.
2.No correct connection.| 1. Check the cable.
2. Check the power of the
3. Connecting cable.
Distorted output.| 1. Source level too high.
2. Gain of the amplifier too high.| 1. Turn down the source level.
2. Turn down the gain of the amplifier.

ACCESSORY LIST

Check and identify the contents of your package:

Subwoofer x 1 pc
User manual x 1 pc
05x30mm Screw x 8pcs
Mounting template x 1 pc

SPECIFICATIONS & DIMENSIONS

Model No:
Nominal Diameter:
Mounting Depth:
N-Power:
Peak Power:
Nominal Impedance:
Frequency Response:
Sensitivity (SPL/I W/1m):
Free Air Resonance (Fo): Suspension Compliance (Cms): Moving Mass (Mms):
Mechanical “0” (Qms):
Electrical “0” (Qes):
Total Speaker “0” (CM):
Equivalent Volume (Vos):
DC Resistance (Re):
Effective Piston Area (Sd):
Force Factor (BL):
Reference Efficiency (No):
Voice Coil (V.C.):
Magnet Mass:
Net Mass (lpc):| NSW-Z100254
10″ (254mm)
4.6″ ( I 17mm)
250 watts
1500 watts
4Ω
30Hz-1KHz
82±3dB
42.554Hz
97.682uM/N
143.202g
5.067
0.934
0.789
13.690Ltr
4Ω
31.416mm2
12.803Txm
0.109%
Φ49.5mm, ASV
45 Oz (1276g)
Approx. 3.3kg
---|---

INSTALLATION

Option 1: Mount on Rear Tray
You can mount the subwoofer on the rear tray.

Set the wiring firmly on the floor of the vehicle, taking the utmost care not to break wires while installing.

Turn off the car ignition key.
• If the power is on, the click noise generated by the connection may damage the subwoofer.
Cut out the mounting template from the packing box and paste it onto the location selected for mounting the subwoofer.
Mark the cut-off hole and the 8 bolt holes.
Cut out the marked area and drill the bolt holes.
Connect the subwoofer to the amplifier.
• The impedance of the units are related to how to connect. Make sure that the output impedance of the amplifier’s speaker terminal is relevant with the connection. (Refer to “Wired Connection”.)
• Consult the diagram. Be sure to connect O 0 corresponding terminals, i.e. “+” to “+” Speaker Coble and “-” to “-“. Connection with reversed (not supplied) polarity will degrade the quality of the reproduction
Mount the subwoofer into the rear tray w 6. with the supplied screws.

Option 2: Install in A Sealed Enclosure
If the subwoofer cannot be mounted on the car, place it in a sealed enclosure. Recommended enclosures have been designed and thoroughly tested.

All boards thickness:15mm Connect the subwoofer to the amplifier. Install the subwoofer into the sealed enclosure with the supplied screws.