Nakamichi NBX25M Pro 10 Inch Active Subwoofer Box User Manual

: June 6, 2024
: Nakamichi

Table of Contents

YOUR SUBWOOFER
DIMENSIONS (UNIT: MM)
PANEL FUNCTION
WHAT’S IN THE BOX
SPECIFICATIONS
CONNECTIONS
INSTALLATION
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

NBXESM Pro
User Manual

10″ ACTIVE SUBWOOFER BOX

nakamichicaraudio.com
nakamichi.global
****nakamichi.caraudio

YOUR SUBWOOFER

Dear Customer,
Congratulations on purchasing our Nakamichi mobile system product for your sound system.

This product has been designed and manufactured to Nakamichi’s exacting standards to ensure many years of audio enjoyment. For the best performance, we recommend that you have your Nakamichi product installed by an authorized Nakamichi dealer.

If you would like to install this product on your own, we recommend for you to go through this manual to familiarize yourself with all the installation requirements and procedures.

If you encounter any issues or if you have any questions on the operation of this product, please contact your nearest authorized Nakamichi dealer for assistance, or you may also contact us through our website or social media channels.

Installation of Your Product

In today’s modern vehicles, it is very easy to cause damage to existing systems through improper installation. Please follow and scrutinize all wiring diagrams to ensure that you have connected everything in its proper place.

If you find yourself uncomfortable or unfamiliar with understanding the wiring and installation diagrams or testing instructions, do contact your nearest Nakamichi dealer to perform the installation for you.

Safety Warnings and Considerations

Clean only with a dry cloth or other similar materials.
Install your product in a dry, well-ventilated location that does not interfere with your vehicle’s safety equipment.
Do not block any ventilation openings when installing this
Do not mount the product in the engine compartment of your vehicle or in any areas of extreme heat such as mufflers, silencers, exhaust pipes or other heat-producing apparatus.
Securely mount the product so that it does not come loose in the event of a collision or as a result of repeated vibrations that might occur during normal operation.
Installation of the apparatus must be done with great care to prevent damage to your vehicle’s fuel lines, power, and other electrical wiring, hydraulic brake lines, and other systems. If possible, always visit your nearest Nakamichi dealer to perform the installation.
Do not run any wiring outside or underneath the vehicle. Keep all wires inside the vehicle.
Take the necessary precautions when making connections to the vehicle’s battery to avoid any potential shock.
Protect all system wires from sharp edges by carefully routing them, always use rubber grommets to protect wiring and cables whenever you are installing them through metal
Secure all wiring using cable ties or wire clamps to protect them from moving parts and sharp edges.
This apparatus shall not be exposed to dripping or splashing, and no object filled with liquids shall be placed on the apparatus
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power input terminals are damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Fuses shall be replaced only with the correct type and fuse value, and only when the apparatus is powered off.
Exposure to high sound pressure levels may lead to permanent hearing loss. Take every precaution to protect your
This product is designed specifically for use with 12 volts, negative-ground electrical systems only. Using this product in systems with the positive ground and/or voltages other than 12V may result in damage to the product and your system.

DIMENSIONS (UNIT: MM)

PANEL FUNCTION

Low-Level Inputs The unit accepts low-level RCA inputs here.
Low Pass Filter You can select a cut-off frequency from 40Hz to 150Hz.
Bass Boost Adjustment For optimal bass adjustment according to listening preferences and music characteristics.
Phase Switch Adjust the phase from 0 to 180 degrees.
Power and Protection Indicator When the power is turned on, the power indicator shows green.
Bass Boost Remote Connect the bass boost remote to this port and change your bass boost settings on the go.
Power Input Terminal
Fuse Socket Always replaces the fuse of the rating prescribed.

WHAT’S IN THE BOX

Check and identify the contents of your package:

Subwoofer x 1 pc
Installation Bracket x 2pcs
Screw 03x14mm x 2pcs
Screw 04x25mm x 8pcs
Remote Cable 5m x 1 pc
Remote Control x 1 pc
Fuse 20A x 1pc
User Manual x 1 pc
L Shape Wrench x 1pc

SPECIFICATIONS

Subwoofer:	10″ Active Subwoofer Box
N-power:	150 watts
MAX Power:	1000 watts
Sensitivity(dB/W/m):	87 ± 3dB
Frequency Response:	30 – 300Hz
Impedance	40
Voice Coil:	ASV 035.5mm
Subwoofer Magnet:	120x60x2Omm, Y25
Magnet Mass:	320z (907g)
Net Mass (1 pc):	Approx. 7.6kg