acer XV2 Series LCD Nitro Monitor User Guide
- June 6, 2024
- Acer
Table of Contents
LCD Monitor NITRO XV2 Series / XV322QK
USER GUIDE
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
-
To clean the LCD monitor screen:
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently. -
Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.
-
Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
-
Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any nature.
-
Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside this range may result in permanent damage.
-
Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
•Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
Attaching the monitor to the base
- Remove the monitor from the packaging.
- Attach the footstand to the base. (for selected models).
- Turn clockwise to lock. Ensure that the base is locked onto the stand. (for selected models)
- Secure the base to the stand by turning the screw using the integrated tab or a suitable coin. (for selected models)
**Connecting your monitor to a computer
**
-
Turn off your computer and unplug your computer’s power cord.
-
Connect the signal cable to the DP (optional) and/or HDMI (optional) input socket of the monitor, and the DP(optional) and/or HDMI (optional) output socket of the graphics card on the computer.
-
USB Type C Cable (Optional, USB Type C input models only) Connect one end of the USB type C cable (optional) to your computer and connect the other end to your electric devices.
-
Connect the USB Cable(Optional)
Connect the USB cable to the port for fast charge.
Connect the USB cable to the port. -
Insert the monitor power cable into the power port at the back of the monitor.
-
Plug the power cords of your computer and your monitor into a nearby electrical outlet.
Note: Audio output is only for the audio output model. Please check the
user manual for more instructions.
Transmitting the 4K 144Hz signal via one HDMI 2.1 port requires DSC (Display
Stream Compression) functionality.
AMD FreeSync Premium:
It can allow an AMD FreeSync Premium supported graphics source to dynamically adjust display refresh rate based on typical content frame rates for power- efficient, virtually stutter-free, and low-latency display update.
**External controls
**
1&2|
Power button
| Turns the monitor on/off. Blue indicates power on. Amber indicates standby/
power-saving mode.
---|---|---
3|
Function key
| a. Press to view the Main page. Press again to enter the next function in
the Function Menu.
b. When the Function Menu is active, press this key selected or move to the
next function
4|
Function key
| a. Press to view the Main page. Press again to enter the Input select
function.
b. When the Function Menu is active, press this button selected or move to the
previous function.
5|
Function key
| a. Press to view the Main page.Press again to enter the Volume adjustment
function.
b. When the Function Menu is active, this button will enter a selection in the
OSD.
6|
Function key
| a.Press to view the Main page. Press again to enter the brightness
adjustment function.
b.When the Function Menu is active. Press to return the previous menu or exit
the current menu.
7|
Function key
| When the Main page and Function Menu is active, press this button to select scenario mode or game mode.
Note: Acer monitor is purposed for video and visual display of information obtained from electronic devices.
Regulations and safety notices
FCC notices
This device has been tested and found to comply with the limits for a Class
B digital device pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This device generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or
television reception, which can be determined by turning the device off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/television technician for help.
CE declaration of conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and other relevant provisions of EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign requirements for energy-related products.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with EMC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception.
Caution
Changes or modifications not expressly approved by the manufacturer could void
the user authority, which is granted by the Federal Communications Commission,
to operate this product.
In order to prevent damage to the monitor, do not lift the monitor by its
base.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Notice: Canadian users
CAN ICES-003(B)/ NMB-003(B)
Disposal of waste equipment by the user in a private household in the European Union
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service, or the shop where you purchased the product.
SPECIFICATION
LCD Panel | Driving system | TFT Color LCD |
---|---|---|
Size | 31.51V (80cm) | |
Pixel piton | 0.181 nun(H) x 0.181 mm(V) | |
Brightness | Native: 350nits.HDR400 mode:Peak 400nits | |
Contrast | 100.003.003:1Max. (ACM) | |
Viewable angle | 178′ (H)178′ (V) (CRa10) (typical) | |
Response time | 1ms (G to G).0.5ms (G to G.Mn 1 | |
Panel Type | In-Plane Switching | |
ii-F requency | HOM1(2.0/2.1):30.255104z OP 1A/Type C:338-338KHz | |
V-Frequency | 08-144Hz | |
splay Colors | 1.0713 Colors | |
Dot Clock | HCMI 2.0:600MHz |
HON 2.1/DP 1.4/Type C.1360MHz
Max. Resolution| 3840x21600140Hz
Plug 8 Play| VESADOCCVDOC2B
Power consumption| ON Mode| 38W
Standby mode| 0.5W
Off Mode| 0.3W
Input Connector| DP 1A(Only DP Model)(OptIonal)
MOM 2.1(Only MOM Model)
USB type C (Only USB type C Model)
USB Hub / U5133.0 x 4 (Only USB Hub Model)
Input Video Signal| DP (Only OP Model)(0pbonal)
HMI signal (Only HOMI-Input Model)
USB type C (Only USB type C Model)
Speakers| 4W x 2
Audio| Audio-Output (Only Audio-Output Mall)
Maximum Screen Sae Hortzonts1.897nun| Verboal.392mm
Power Source| 100-240V-, 50:60Hz
Environmental Consklembons| Operating Temp: IT to AOC Storage Temp. -20′ to
60’C Operabng Humidity: 20% to 80%
Dimensions| 715.7(VV) x 470.3-560.3(H) x 267 (D)mn
Weight (N. W.)| 10.58kg UM (net)
mechanism spec| Tilt -5 to 15
Swivel: 365
Height adjustment 90mm Pivot: No
Detachable fool stand: Yes
External Controls:| Functions| Brightness VRB
Contrast Am Point
Black Boast Language
Low Blue Ught OSO TIMM.
ACM Transparency
HOP OSO Lack
UghtSense Input
Super Stinnes, Auto Source
Max Silentness Aide Mode
Gamma Hot Key Assignment
Color Temp. ODC21
Modes ProxiSense
Color Space Rest Reminder
GolorSense HMI Black Level
Grayscale Mode Quick Start Mode
6-& ax Hue USB Port Select
&mos base USB 3.0
*fume HMI 2.1
Mute Power-of USB Charge
Over Orin Information
MID FreeSync Premium
Refresh Rate MIT
‘Spealkabons may vary depending on model, SKU, and/or region.
Find manuals and other documents for your Acer product on the official Acer support website.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>