iLIVE ITBSW241 4.1 Home Theater System with Bluetooth User Guide

iLIVE ITBSW241 4.1 Home Theater System with Bluetooth

Important Safety Instructions

• Read these Instructions.
• Keep these Instructions.
• Heed all Warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus {including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/ accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
• Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Setup Features & Specifications

• Supports Bluetooth 5.0, range: 60 ft. 4. 1 channel stereo sound
• Digital volume control
• Full-function remote
• Aux In (3.5mm audio input)

Includes

• Remote control with CR2025 battery
• AC/DC power adapter
• 3.5mm to RCA cable

Power

Plug the power adapter for the soundbar into the DC Input on the back of the soundbar and a standard wall outlet.

Remote Battery

Requires 1 CR2025 battery (pre-installed).

Orientation

Rear View

Front View

Source Mode Indicator LED

STATUS

• Power Off
• Bluetooth Standby/Pairing
• Bluetooth Connected
• Aux In Mode

INDICATOR LIGHT

• Red Light
• Quick Flashing Blue
• Light Solid Blue Light
• Green Light

Speaker Controls

1. Power/Source Press to power the unit ON. Press and hold to power the unit OFF. Press to switch the audio source to Bluetooth and Line In modes.
2. Volume Press to adjust the volume.
3. Pair Press to manually begin Bluetooth pairing (BLUETOOTH MODE).
4. Auxin 3.5mm audio input.

Connecting the Satellite Speakers

Connect each satellite speaker to the two satellite speaker inputs on the rear of the soundbar. Note: If there is no sound from satellite speakers, please make sure the sub and satellite speakers are correctly connected.

Connecting the Subwoofer

Connect the subwoofer to the output la bled “Sub Out” on the rear of the soundbar as seen below.

Remote

Connecting Devices

Initial Bluetooth Connection and Playing Audio

1.  When first powered ON the unit defaults to Bluetooth mode. A voice will say, “Bluetooth;’ and the LED indicator will quickly flash blue. When pairing, remain within 3 feet of the Bluetooth device.
2.  Using the controls on your Bluetooth device, select ITBSW241 in the Bluetooth Settings Menu to pair. If need be, refer to the user’s manual for your specific device for more information.
3.  When successfully paired, a voice will announce, “Bluetooth is connected;’ and the LED indicator will turn solid blue. Audio from the connected Bluetooth device will now be heard through the speaker.
4.  Use the controls on the connected Bluetooth device to select and play audio. Use the speaker controls or the connected Bluetooth device to play, pause, and adjust the volume level.
5.  After initial pairing, anytime the speaker powers ON it will automatically connect to the last Bluetooth device used. Note: If your device should become unpaired or you find it is unable to connect, press and hold the Play button (on remote), or Pair button (sound bar) to enter to Pairing Mode. A voice will announce, “Bluetooth is connecting,” and you can connect to the speaker manually.
   Note: This sound bar has a last-function-used memory; it will resume using the last mode before it was turned OFF after it is turned ON again.

Troubleshooting

If the sound bar should become unpaired or will not connect normally, follow these steps in your device’s Bluetooth Settings Menu.

• Delete the sound bar (“Forget This Device”).
• Turn Bluetooth OFF, then ON again, and repeat the Initial Bluetooth Connection steps.

Auxin Requires a 3.5mm audio cable (included).

1. Connect the 3.5mm to RCA cable to the 3.Smm Aux in on the sound bar and the other end into your TV or another device.
2. Power ON the sound bar and press Source on the sound bar or Aux on the remote to select Aux In Mode. A voice will announce the source mode and the indicator will turn green.
3. Use the controls on the connected device to select and play audio. Be sure the volume on your connected device is audible when you begin playing.

FCC Warnings

FCC Warnings
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection ag幻nst harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instrnctions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver, Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician

FCC Radiation Exposure Statement
This equipment complied with FCC radiation exposure liroits set forth for an uncontrolled environment. This equipment should be installed and operated with minimnrn distance 20cm between the radiator & yonr body.
Additional Warnings and Precautions

• CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type
•  The battery shall not be exposed to excessive heat such as snn•hine, fire or the like.
• Keep new and used batteries away from children. If the battery compar1lnent does not close securely, stop using the product and keep it away from children.
• If you think batteries ruight have been swallowed or placed inside any part of the body, seek immediate medical attention.
• Do not mix old and new batteries
•  Completely replace all old batteries with new ones
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.
• Batteries should be recycled or disposed of as per state and local guidelines
• CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
• The mains plug is used as a disconnect device and it should be rem叩readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the m打n, socket outlet completely.
• WARNING: Shock hazard – Do Not Open
• Caution and marking information is located at the rear or bottom of the apparatus.
• WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain, moisture, dripping, or splashing.
• Objects filled with liquids, such as vases, shall not be placed on the apparatus.
• CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.
• WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
• WARNING: Do not place this unit directly onto furniture surfaces with any type of soft, porous, or sensitive finish. As with any rubber compound made with oils, the feet could cause marks or staining where the feet reside.
• We recommend using a protective barrier such as a cloth or a piece of glass between the unit and the surface to reduce the risk of damage and/or staining.
•  WARNING: Use of this unit near fluorescent lighting may cause interference regarding use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>