Lindero H26 True Wireless Earbuds User Manual
- June 6, 2024
- Lindero
Table of Contents
H26
TRUE WIRELESS EARBUDS
USER MANUAL
Please read the Manual before use.
Product Structure Description Picture only for reference!
Packing List
1 pair of earbuds,
1 charging case,
4 pairs of tips (size: XS, S, L; M tips already on the earbuds),
1 USB cable,
1 User Manual.
Use Instructions
Bluetooth pairing
Method 1
Take out two earbuds, they will turn on and enter pairing mode automatically
with orange and white indicator lights twinkling alternately; which enable the
Bluetooth of your phone to search “H26” and then click it for pairing, it will
be connected.
Method 2
When the earbuds are turned on and not connected, double-tap the left or right
MFB to enter pairing mode with orange and white indicator lights twinkling
alternately. Which enable the Bluetooth of your phone to search “H26” and then
click it for pairing, it will be connected. (Note: If the earbuds have been
connected to device 1, please turn off the Bluetooth function of device 1 and
then try to pair with device 2.)
Power On
The earbuds will turn on automatically when taken out from the charging case,
with orange and white light is on for 1s; When the earbuds shut down, press
the left or right MFB for 4s to boot up.
Power Off
The earbuds will turn off automatically when put back into the charging case,
with the orange light always on When the earbuds is on and out of the charging
case, long-press the left or right MFB for 5s, then the orange light is on for
1s, that means the earbuds shut down.
Use of MFB
Reset
Put the earbuds back into the charging case with the orange light on, long-
press the left and right MFB for 5s, the orange light turns off. Then wait for
the left and right earbuds to pair again (this operation takes about 10s),
finally take out the earbuds to finish resetting.
ANC Mode
In standby state/music state:
<Active Noise Cancellation (ANC) Mode>
When using in binaural mode, long-press the left MFB for 2s to hear the
HearThrough mode turned on, then press for 2s more to turn on ANC; and press
for another 2s to turn off ANC.
< HearThrough mode>
You can capture surrounding sounds by turning on the HearThrough mode . When
you want to pay attention to the environment or have a conversation, this
function is very convenient. Operation method: long-press the left MFB for 2s
to enter the HearThrough mode; switch in the order: HearThrough mode→ANC On→
ANC Off.
Note: The noise reduction function (ANC) is only available when both
earbuds are used at the same time. You cannot use ANC when only using one
earbud. In addition, ANC will be turned off when the power of the earbud is
off.
Common questions
Q: Unable to connect to phone:
1. Ensure that the product has sufficient battery, has been turned on, and
has been paired with the phone to establish a connection.
2. The phone’s Bluetooth activates.
3. Whether the distance between the product and the phone is more than 10
meters (about 30 feet), and whether there are walls, other obstacles or other
electronic devices between them.
4. Please reset to factory settings and then re-pair.
Q: No voice heard Please try to turn up the phone’s volume.
Q: Have noise Bluetooth is a wireless technology, which means it is very
sensitive to objects between the product and the device it is paired with. The
design conditions for use are: the distance between the product and the
matching device is no more than 10m, and there is no big obstacle (such as a
wall) between the two. Note: The sound effect may be affected in a noisy
outdoor environment.
Battery information
- This product is powered by a rechargeable battery. New battery performs better after two or
- This product is powered by a rechargeable battery. A new battery will perform better after two or three complete charge and discharge cycles. The battery can be charged and discharged repeatedly, but it will eventually fail.
- If this product is placed in overly hot or over the cold places, such as in a closed car in summer or winter, the capacity and life of the battery will be reduced. It is recommended to store in 15 ℃ to 20 ℃ environments. It may not work in extremely cold or hot environments even if it is fully charged. The battery’s performance will be restricted when the temperature is far below freezing.
- Do not throw the battery into fire to prevent it from exploding. The damaged battery may also explode. Please follow the local regulations to deal with the battery. Please recycle the battery when possible, and do not dispose of it as household garbage.
Warm Tips: If this product is not used frequently, please regularly recharge and discharge it every three months, to avoid battery damage caused by unused for too long time.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.